Only Probe bed within sliced print area

supernovae

Since Prusa announced their new technique of probing the bed only in print (wih their soon to be released XL) area to guarantee a good first layer, I saw the folks at Klipper have already posted up a macro.

https://gist.github.com/ChipCE/95fdbd3c2f3a064397f9610f915f7d02

Is this possible to pull off with Duet?

The gist shows how to do start gcode and the gcode for calculating the print area to mesh out.

Maybe i'll take a spin in porting it over next week. Just figured I'd ask if anyone has already done this

gloomyandy

I think it was actually done here first!
https://forum.duet3d.com/topic/15302/cura-script-to-automatically-probe-only-printed-area?_=1637320962433
https://forum.duet3d.com/topic/25882/only-probe-bed-where-it-is-printed-solution-with-prusaslicer

PCR

@supernovae chip is a friend of mine in his original tweet he tagged me;) yes it's possible. But I think only in PS or Ideamaler. Cura is weird