Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Dumbfounded ! Firmware bug in 3.4 beta 6?

    Scheduled Pinned Locked Moved Solved
    Beta Firmware
    5
    27
    1.4k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • T3P3Tonyundefined
      T3P3Tony administrators @GeneRisi
      last edited by

      @generisi said in Dumbfounded ! Firmware bug in 3.4 beta 6?:

      I have my own "mesh.g" macro that allows me to also use "Q1" and "Q2" as inputs. I use the macro to check that the bed mesh in use has been created after the most recent system reset and is not being used if it was created some time before the most recent reset.

      ok i did not realise that - nice use case!

      @generisi said in Dumbfounded ! Firmware bug in 3.4 beta 6?:

      is there a reason why you did not combine the two "G1 R2 ..." commands into a single command?

      restoring it in the way I showed, with some Z lift first, is what we recommend for most use cases as it means the last axis to move into position will be Z, so there is less change of the tool dragging across the top of the print as the position is restored.

      www.duet3d.com

      1 Reply Last reply Reply Quote 0
      • GeneRisiundefined
        GeneRisi @GeneRisi
        last edited by

        @generisi There are either 2 or 3 contact spots checked very unscientifically with double stick tape on the bed when alternating T1, T0, T1, T0, ...
        Inked20211201_092323_LI.jpg

        1 Reply Last reply Reply Quote 0
        • GeneRisiundefined
          GeneRisi
          last edited by

          @t3p3tony Here is a simple print file that demonstrates T1,T0,T1,T0:

          G90
M83
M117 Preheat & Level
G28
G10 P0 S242 R200; set extruder 0 active and standby temps
G10 P1 S242 R200; set extruder 1 active and standby temps
M190 S85 ; wait for bed temperature
;mesh gcode
G29 Q0
T1
G1 E-0.8000 F3000
; feature skirt
; tool H0.200 W0.400
G1 Z0.200 F360
G1 X145.575 Y112.700 F9000
G1 E0.8000 F3000
G1 X139.600 Y106.725 E0.2810 F90
G1 X137.300 Y104.425 E0.1082
G1 X137.300 Y95.575 E0.2944
G1 X145.575 Y87.300 E0.3892
G1 X154.425 Y87.300 E0.2944
G1 X156.725 Y89.600 E0.1082
G1 X162.700 Y95.575 E0.2810
G1 X162.700 Y104.425 E0.2944
G1 X154.425 Y112.700 E0.3892
G1 X145.575 Y112.700 E0.2944
G1 E-0.8000 F3000
; feature cross - external single extrusion
; tool H0.200 W0.400
G1 Z0.400 F360
G1 X147.738 Y100.000 F9000
G1 Z0.200 F360
G1 E0.8000 F3000
G1 X149.641 Y100.000 E0.0633 F45
G1 X150.000 Y99.641 F9000
G1 X150.000 Y97.738 E0.0633 F45
G1 E-0.8000 F3000
G1 Z0.400 F360
G1 X152.262 Y100.000 F9000
G1 Z0.200 F360
G1 E0.8000 F3000
G1 X150.279 Y100.000 E0.0659 F45
G1 X150.200 Y100.000 E0.0026
; tool H0.200 W0.416
G1 X150.117 Y100.000 E0.0029
; tool H0.200 W0.499
G1 X150.000 Y100.000 E0.0049
G1 X150.000 Y100.117 E0.0049
; tool H0.200 W0.416
G1 X150.000 Y100.200 E0.0029
; tool H0.200 W0.400
G1 X150.000 Y100.279 E0.0026
G1 X150.000 Y102.262 E0.0659
G1 E-0.8000 F3000
; layer end
T0;
G1 E-0.8000 F3000
; feature skirt
; tool H0.200 W0.400
G1 Z0.200 F360
G1 X145.575 Y112.700 F9000
G1 E0.8000 F3000
G1 X139.600 Y106.725 E0.2810 F90
G1 X137.300 Y104.425 E0.1082
G1 X137.300 Y95.575 E0.2944
G1 X145.575 Y87.300 E0.3892
G1 X154.425 Y87.300 E0.2944
G1 X156.725 Y89.600 E0.1082
G1 X162.700 Y95.575 E0.2810
G1 X162.700 Y104.425 E0.2944
G1 X154.425 Y112.700 E0.3892
G1 X145.575 Y112.700 E0.2944
G1 E-0.8000 F3000
; feature cross - external single extrusion
; tool H0.200 W0.400
G1 Z0.400 F360
G1 X147.738 Y100.000 F9000
G1 Z0.200 F360
G1 E0.8000 F3000
G1 X149.641 Y100.000 E0.0633 F45
G1 X150.000 Y99.641 F9000
G1 X150.000 Y97.738 E0.0633 F45
G1 E-0.8000 F3000
G1 Z0.400 F360
G1 X152.262 Y100.000 F9000
G1 Z0.200 F360
G1 E0.8000 F3000
G1 X150.279 Y100.000 E0.0659 F45
G1 X150.200 Y100.000 E0.0026
; tool H0.200 W0.416
G1 X150.117 Y100.000 E0.0029
; tool H0.200 W0.499
G1 X150.000 Y100.000 E0.0049
G1 X150.000 Y100.117 E0.0049
; tool H0.200 W0.416
G1 X150.000 Y100.200 E0.0029
; tool H0.200 W0.400
G1 X150.000 Y100.279 E0.0026
G1 X150.000 Y102.262 E0.0659
G1 E-0.8000 F3000
; layer end
; pass 2
T1
G1 E-0.8000 F3000
; feature skirt
; tool H0.200 W0.400
G1 Z0.200 F360
G1 X145.575 Y112.700 F9000
G1 E0.8000 F3000
G1 X139.600 Y106.725 E0.2810 F90
G1 X137.300 Y104.425 E0.1082
G1 X137.300 Y95.575 E0.2944
G1 X145.575 Y87.300 E0.3892
G1 X154.425 Y87.300 E0.2944
G1 X156.725 Y89.600 E0.1082
G1 X162.700 Y95.575 E0.2810
G1 X162.700 Y104.425 E0.2944
G1 X154.425 Y112.700 E0.3892
G1 X145.575 Y112.700 E0.2944
G1 E-0.8000 F3000
; feature cross - external single extrusion
; tool H0.200 W0.400
G1 Z0.400 F360
G1 X147.738 Y100.000 F9000
G1 Z0.200 F360
G1 E0.8000 F3000
G1 X149.641 Y100.000 E0.0633 F45
G1 X150.000 Y99.641 F9000
G1 X150.000 Y97.738 E0.0633 F45
G1 E-0.8000 F3000
G1 Z0.400 F360
G1 X152.262 Y100.000 F9000
G1 Z0.200 F360
G1 E0.8000 F3000
G1 X150.279 Y100.000 E0.0659 F45
G1 X150.200 Y100.000 E0.0026
; tool H0.200 W0.416
G1 X150.117 Y100.000 E0.0029
; tool H0.200 W0.499
G1 X150.000 Y100.000 E0.0049
G1 X150.000 Y100.117 E0.0049
; tool H0.200 W0.416
G1 X150.000 Y100.200 E0.0029
; tool H0.200 W0.400
G1 X150.000 Y100.279 E0.0026
G1 X150.000 Y102.262 E0.0659
G1 E-0.8000 F3000
; layer end
T0;
G1 E-0.8000 F3000
; feature skirt
; tool H0.200 W0.400
G1 Z0.200 F360
G1 X145.575 Y112.700 F9000
G1 E0.8000 F3000
G1 X139.600 Y106.725 E0.2810 F90
G1 X137.300 Y104.425 E0.1082
G1 X137.300 Y95.575 E0.2944
G1 X145.575 Y87.300 E0.3892
G1 X154.425 Y87.300 E0.2944
G1 X156.725 Y89.600 E0.1082
G1 X162.700 Y95.575 E0.2810
G1 X162.700 Y104.425 E0.2944
G1 X154.425 Y112.700 E0.3892
G1 X145.575 Y112.700 E0.2944
G1 E-0.8000 F3000
; feature cross - external single extrusion
; tool H0.200 W0.400
G1 Z0.400 F360
G1 X147.738 Y100.000 F9000
G1 Z0.200 F360
G1 E0.8000 F3000
G1 X149.641 Y100.000 E0.0633 F45
G1 X150.000 Y99.641 F9000
G1 X150.000 Y97.738 E0.0633 F45
G1 E-0.8000 F3000
G1 Z0.400 F360
G1 X152.262 Y100.000 F9000
G1 Z0.200 F360
G1 E0.8000 F3000
G1 X150.279 Y100.000 E0.0659 F45
G1 X150.200 Y100.000 E0.0026
; tool H0.200 W0.416
G1 X150.117 Y100.000 E0.0029
; tool H0.200 W0.499
G1 X150.000 Y100.000 E0.0049
G1 X150.000 Y100.117 E0.0049
; tool H0.200 W0.416
G1 X150.000 Y100.200 E0.0029
; tool H0.200 W0.400
G1 X150.000 Y100.279 E0.0026
G1 X150.000 Y102.262 E0.0659
G1 E-0.8000 F3000
; layer end
M117 Print Complete !
T-1
M999

          Simple_cross.jpg

          dc42undefined 1 Reply Last reply Reply Quote 1
          • dc42undefined
            dc42 administrators @GeneRisi
            last edited by

            @generisi please post your tool change files again, because you have changed them since you posted them.

            Duet WiFi hardware designer and firmware engineer
            Please do not ask me for Duet support via PM or email, use the forum
            http://www.escher3d.com, https://miscsolutions.wordpress.com

            GeneRisiundefined 1 Reply Last reply Reply Quote 0
            • GeneRisiundefined
              GeneRisi @dc42
              last edited by GeneRisi

              @dc42 OK, I will now

              ; tpost0.g
; called after tool 0 has been selected

;heatup
M116 P0

;prime nozzle
;M98 Pprime.g

;mesh levelling on
G29 Q1

;PCF fan on
;M106 P2 S255

G1 R2 X0 Y0 Z2
G1 R2 Z0 F360

              ; tpost1.g
; called after tool 1 has been selected

;heatup
M116 P1

;prime nozzle
;M98 Pprime.g

;mesh levelling on
G29 Q1

;PCF fan on
;M106 P4 S255
G1 R2 X0 Y0 Z2
G1 R2 Z0 F360

              The Free and pre files have not changed.

              T3P3Tonyundefined 1 Reply Last reply Reply Quote 0
              • T3P3Tonyundefined
                T3P3Tony administrators @GeneRisi
                last edited by

                @generisi with the image with the two cross prints you showed. Do you mean that T0 and T1 printed one of the crosses perfectly aligned and then the next time T1 was used it printed the miss aligned cross?

                www.duet3d.com

                GeneRisiundefined 1 Reply Last reply Reply Quote 0
                • GeneRisiundefined
                  GeneRisi @T3P3Tony
                  last edited by GeneRisi

                  @t3p3tony Hi Tony, T1 printed the cross in one location and T0 printed the cross in the other location. Even when repeating the sequence a second time, T1 prints in one location and T0 in the other location.

                  If the order is switched, so that T0 is used first, then T1, the crosses align as expected. This is also true if the sequence is T0, T1, T0, T1.

                  FWIW, many years ago, I used to be a programmer and when I think about this, uninitialized values that are referenced comes to mind... FWIW

                  @dc42 , is there some level of debugging I can turn on that might provide you some helpful information?

                  dc42undefined 1 Reply Last reply Reply Quote 0
                  • Phaedruxundefined Phaedrux marked this topic as a question
                  • dc42undefined
                    dc42 administrators @GeneRisi
                    last edited by

                    @generisi I have a theory about what us happening. Tool offsets are usually ignored in system macro files. So I think the G1 R2 X0 Y0 Z0 command at the end of config.g is ignoring the tool offsets. This obviously isn't wanted in this case.

                    I will do some tests to confirm or refute this theory.

                    Duet WiFi hardware designer and firmware engineer
                    Please do not ask me for Duet support via PM or email, use the forum
                    http://www.escher3d.com, https://miscsolutions.wordpress.com

                    GeneRisiundefined 2 Replies Last reply Reply Quote 0
                    • GeneRisiundefined
                      GeneRisi @dc42
                      last edited by GeneRisi

                      @dc42 I only added this line after the exchange with @T3P3Tony above; I did, however, use G1 R2 Z0 before communicating with Tony. As an alternative, I can remove the G1 R2 command and use Simplify3d's internal state variables to restore the X, Y and Z locations. Let me know whether this would be a helpful test.
                      Gene

                      I removed the G1 R2 commands from the tpostx macros. It didn't change the outcome.
                      Gene

                      Why would the tool offsets matter for a move that simply gets the new tool head near the area where it will be used? The printing doesn't occur until a few gcode commands after this move. Aren't the tool offsets applied to every gcode move command?
                      Gene

                      1 Reply Last reply Reply Quote 0
                      • GeneRisiundefined
                        GeneRisi @dc42
                        last edited by

                        @dc42 Is there something I can do t help debugging this?

                        1 Reply Last reply Reply Quote 0
                        • GeneRisiundefined
                          GeneRisi
                          last edited by GeneRisi

                          @dc42 I found the problem.

                          When tool T1 was being returned, the Y "parking" coordinate was off by 1 mm. The tool parking location didn't budge but the firmware thought that the tool location was 1mm beyond where it actually was. The machine is a corexy (E3D), so even though only the Y coordinate was off, I suspect it affected both the x and y location from the the firmware's perspective.

                          1 Reply Last reply Reply Quote 2
                          • GeneRisiundefined GeneRisi has marked this topic as solved
                          • First post
                            Last post
                          Unless otherwise noted, all forum content is licensed under CC-BY-SA