BlTouch Issues
-
@jay_s_uk in this moments, not sure, but i think remenber i have 3.4.0 Beta XX??? i check after
-
@peirof there was an issue with beta 7 too
-
@jay_s_uk no... the lottery didn't win me, no... but this... let's hope it's this, it was driving me crazy
-
In the post you have linked... direct to Drobox folder...
Firmware Duet v3 Mini 3.4 BlTouch
this is supposed to be the firmware, with which I have to update my Duet 3 Mini... but I have two doubts:
A- It is not in the usual format. Correct?
B- It is updated in the same way. With the DWC? -
@peirof use the .uf2 and yes through DWC
-
@jay_s_uk
Tomorrow more..., but dont works after apply firmware...
Panel Due... only works in Io0? -
@peirof See https://docs.duet3d.com/User_manual/Connecting_hardware/Z_probe_connecting#wiring-the-bltouch
For Duet 3 Mini 5+, use IO_1, IO_2 or IO_3.
Don't use IO_4 (okay for MB6HC, but not for Mini 5+), use one of the above. It's because of pin capability, only IO_1, IO_2 and IO_3 are PWM capable. See https://docs.duet3d.com/Duet3D_hardware/Duet_3_family/Duet_3_Mini_5+_Hardware_Overview#io-port-pin-capabilities
Ian
-
@droftarts mmm...
The tests that I was going to do tomorrow, were in that sense, try other shockets ...
Thanks for the conformation...
Bltouch, does it work with the latest Firmware release?
-
-
@droftarts solved, now works ok...!!! I have connected to io1.
Thanks