Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    DUEX 5 V0.8 TO DUEX 5 V0.11

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    9
    283
    23.7k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • paolozampini1973undefined
      paolozampini1973 @droftarts
      last edited by paolozampini1973

      @droftarts However, the singer I must tell you that she is very precise Consider that I printed a 30 mm circle and an error of about 1 or 2 cents Measured by a micrometer clearly and repetitive I seem to have solved the bulk of course there is to be optimized but with all the cables in that state it is unthinkable that then we can make perfect calibrations In fact I will still have to fix the cables and in any case I will have to put a shielded cable for signals to the external drivers even the vertical line is almost imperceptible However, then I will keep you updated And another thing the top is perfectly flat which is not an easy thing I'll give you an example a print of 35 cm I repeat 30 cm there is a difference in height from 0.02 to 0.05 Maximumconfig (24).g
      25706940-b6ee-428f-9029-c7f64f380632-image.png

      paolozampini1973undefined 1 Reply Last reply Reply Quote 0
      • paolozampini1973undefined
        paolozampini1973 @paolozampini1973
        last edited by

        @droftarts A TIP I WANT TO CHANGE NEMA 17 17HS19-2004S1 TO NEMA 23 23HS22-2804S BECAUSE WITH THE WEIGHT TO MOVE, HAVING DOUBLE TORQUE, I COULD INCREASE PERFORMANCE

        17HS19-2004S1.pdf
        23HS22-2804S.pdf

        paolozampini1973undefined 1 Reply Last reply Reply Quote 0
        • paolozampini1973undefined
          paolozampini1973 @paolozampini1973
          last edited by paolozampini1973

          @droftarts
          I have a problem with the Z axis manual override works fine driver 0 direction + and - driver 2 direction + and -
          but when I give the command home all or home z it works only driver 0 direction + driver 2 direction + and - and drive 0 not returning in direction z- that towards z- there are the two switches of driver 0 and driver 2 which are used for self-leveling problem I don't understand that it has always worked until yesterday and today it doesn't work. I have not made any changesconfig (26).g homez.g homeall.g

          I forgot to say that if I follow the command return home X the Z axis moves direction + driver 0 and driver 2 waits for x to return home and then moves driver 0 and driver 2 - and normal operation occurs the same way too y regularly performs the same function

          paolozampini1973undefined 1 Reply Last reply Reply Quote 0
          • paolozampini1973undefined
            paolozampini1973 @paolozampini1973
            last edited by

            @droftarts Hello I haven't been able to do the print tests yet because I have the problem with Z
            please can you help me i can't understand the problem i have Z It's since yesterday i can't find the problem

            droftartsundefined 1 Reply Last reply Reply Quote 0
            • droftartsundefined
              droftarts administrators @paolozampini1973
              last edited by

              @paolozampini1973 I have been testing this, and I think one of your endstops is not working. Either broken wiring, connected in the wrong place, or incorrect configuration.

              When you send M119 with no endstop triggered, it should report "Z: not stopped". When you press either, or both, of the endstops, it should report "Z: at min stop". If one of the endstops does not report a change, check the wiring.

              I have also tested endstop inputs on a DueX5 v0.11 in DueX2 mode, and all endstop inputs on the DueX worked correctly.

              This is your current configuration:

              ; Endstops
              M574 X0 S1 P"!xstop"                                ; configure active-high endstop for low end on X via pin xstop
              M574 Y1 S1 P"!ystop"                                ; configure active-high endstop for low end on Y via pin ystop
              M574 Z2 S1 P"!zstop+!E1stop"
              

              'X0' means 'no endstop'. If it is at the low end (ie when triggered, X is at 0), change to X1.
              'Z2' means 'at the high end', ie when Z is at 320. But I think your machine homes Z when the nozzle is close to the bed, which is the 'low end'. Change to Z1.
              See https://docs.duet3d.com/User_manual/Reference/Gcodes/M574

              Ian

              Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

              paolozampini1973undefined 3 Replies Last reply Reply Quote 0
              • paolozampini1973undefined
                paolozampini1973 @droftarts
                last edited by paolozampini1973

                @droftarts No I think I have not explained myself iswitch have absolutely nothing to do with it I try to explain myself anyway Thanks thanks you made me feel it is not a hardware problem I will also explain to you why Z moves towards the more regularly when I go home with y and then comes back towards the less than 15 mm and this is regular if I do it with X it goes 15 mm towards the plus and then returns towards the less than 15 mm and this is also regular but if I do it with Z it goes home they rise towards the plus 15 mm and then only one axis returns 15 mm the basket what comes home with everything Iasi but it has absolutely nothing to do switch no Switch it is a configuration problem that I am seeing somewhere it is wrong with this I'm sure to 1000 * 1000 I hope I have been able to explain to me why the switch is not getting there but I have a configuration problem Suicide tested and work well Everyone changes Status no problem with Switches

                1 Reply Last reply Reply Quote 0
                • paolozampini1973undefined
                  paolozampini1973 @droftarts
                  last edited by paolozampini1973

                  @droftarts I can make a very short video but I don't know if I can publish it here

                  I have probably changed a parameter that I cannot understand which parameter I have changed the problem I have it only with Z it comes home and with it returns home all the axes coach X returns home I have no problems Z gets up and yes lowers both axes at the same time and is correct with Y the same thing goes up by 15 mm and low series regularly with both axes of Z and works regularly I hope I explained Thanks

                  SIamundefined 1 Reply Last reply Reply Quote 0
                  • SIamundefined
                    SIam @paolozampini1973
                    last edited by

                    @paolozampini1973 I would say post a video, sometimes it is an easier way to solve problems

                    Hypercube-Evolution-Hybrid, Piezo Orion, Orbiter
                    Duet WiFi 1.02 or later + DueX5
                    RepRapFirmware for Duet 2 WiFi/Ethernet 3.4.0beta4 (2021-09-27 11:30:36)
                    Duet WiFi Server: 1.26
                    Duet Web Control 3.4.0beta4 (2021-09-27)

                    1 Reply Last reply Reply Quote 0
                    • paolozampini1973undefined
                      paolozampini1973 @droftarts
                      last edited by

                      @droftarts i reversed the problem before it was configured like this M584 X0 Y1 Z2: 1 E3: 4: 5: 6 Now I configured it this other way M584 X0 Y1 Z1: 2 E3: 4: 5: 6 the result that before I had the problem on the left Now I have what you say on the right now I understand But why why has it always worked like this for months and now I have the problem I do not understand and above all it has also worked so the day before yesterday after we made all the changes
                      M574 Z1 S1 P"!zstop+e1stop"
                      please help me because it doesn't make sense. It always worked because now it doesn't work anymore. The thing is too weird

                      SIamundefined droftartsundefined 2 Replies Last reply Reply Quote 0
                      • SIamundefined
                        SIam @paolozampini1973
                        last edited by SIam

                        @paolozampini1973 Did you use two different motors for the z axis ?

                        M569 P1 S0 R1                                      ; Y    physical drive 1 goes forwards
                        M569 P2 S1                                         ; Z    physical drive 2 goes forwards
                        

                        If you use the same motors with the same wiring, I would say you need to configure both motors the same way

                        Hypercube-Evolution-Hybrid, Piezo Orion, Orbiter
                        Duet WiFi 1.02 or later + DueX5
                        RepRapFirmware for Duet 2 WiFi/Ethernet 3.4.0beta4 (2021-09-27 11:30:36)
                        Duet WiFi Server: 1.26
                        Duet Web Control 3.4.0beta4 (2021-09-27)

                        paolozampini1973undefined 1 Reply Last reply Reply Quote 0
                        • paolozampini1973undefined
                          paolozampini1973 @SIam
                          last edited by paolozampini1973

                          @siam Listen Thanks for the intervention but the machine has been running like this for months
                          How do I cut a video ? you tell me the size is too big

                          droftartsundefined 1 Reply Last reply Reply Quote 0
                          • droftartsundefined
                            droftarts administrators @paolozampini1973
                            last edited by

                            @paolozampini1973 The order you define the axes in M584 and endstops in M574, configures the endstop for the axis. We moved them around the other day, so it's possible they got swapped.

                            With

                            M584 X0 Y1 Z2:1 E3:4:5:6
                            
                            M574 Z1 S1 P"!zstop+e1stop"
                            

                            Z2 uses zstop, Z1 uses e1stop.

                            The same is true of leadscrew position, M671; the first leadscrew is the first one defined in M584.

                            Ian

                            Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

                            1 Reply Last reply Reply Quote 0
                            • droftartsundefined
                              droftarts administrators @paolozampini1973
                              last edited by

                              @paolozampini1973 said in DUEX 5 V0.8 TO DUEX 5 V0.11:

                              @siam Listen Thanks for the intervention but the machine has been running like this for months
                              How do I cut a video ? you tell me the size is too big

                              Use youtube, post link. Can't upload videos to Duet3D forum.

                              Ian

                              Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

                              paolozampini1973undefined 1 Reply Last reply Reply Quote 0
                              • paolozampini1973undefined
                                paolozampini1973 @droftarts
                                last edited by paolozampini1973

                                @droftarts

                                M574 Z2 S1 P"!zstop" ?
                                M574 Z1 S1 P"e1stop" ?

                                but Forgive me Excuse me for what reason it always worked even after when we made the changes I did the print tests it worked after we also made the changes and now it doesn't work anymore it's a very strange thing You can help me understand Thanks

                                droftartsundefined 1 Reply Last reply Reply Quote 0
                                • droftartsundefined
                                  droftarts administrators @paolozampini1973
                                  last edited by droftarts

                                  @paolozampini1973 said in DUEX 5 V0.8 TO DUEX 5 V0.11:

                                  @droftarts

                                  M574 Z2 S1 P"!zstop" ?
                                  M574 Z1 S1 P"e1stop" ?

                                  NO. Z parameter in M574 sets where the endstop is physically, on the axis. High or low. Both endstops are low, and combined together. Listing them separately is incorrect. You also seem to have lost the inversion on the e1stop. It should be:

                                  M574 Z1 S1 P"!zstop+!e1stop"
                                  

                                  Ian

                                  Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

                                  paolozampini1973undefined 2 Replies Last reply Reply Quote 0
                                  • paolozampini1973undefined
                                    paolozampini1973 @droftarts
                                    last edited by

                                    @droftarts

                                    M574 Z2 S1 P"!zstop"
                                    M574 Z1 S1 P"!e1stop"
                                    So this is how it works that it goes towards the plus and then returns towards the minus but the first switch intervenes you can see both AXES

                                    1 Reply Last reply Reply Quote 0
                                    • paolozampini1973undefined
                                      paolozampini1973 @droftarts
                                      last edited by

                                      @droftarts said in DUEX 5 V0.8 TO DUEX 5 V0.11:

                                      @paolozampini1973 said in DUEX 5 V0.8 TO DUEX 5 V0.11:

                                      @droftarts

                                      M574 Z2 S1 P"!zstop" ?
                                      M574 Z1 S1 P"e1stop" ?

                                      NO. Z parameter in M574 sets where the endstop is physically, on the axis. High or low. They both should be Z1. Listing them separately is incorrect, too. You also seem to have lost the inversion on the e1stop. It should be:

                                      M574 Z1 S1 P"!zstop+!e1stop"
                                      

                                      so it doesn't do the inversion it goes towards the plus and it doesn't come back towards the minus but the thing I don't understand why it doesn't work anymore has always worked even after we put our hands on it

                                      droftartsundefined 1 Reply Last reply Reply Quote 0
                                      • droftartsundefined
                                        droftarts administrators @paolozampini1973
                                        last edited by droftarts

                                        @paolozampini1973 What does M119 report when:
                                        No switch is pressed
                                        Z1 endstop is pressed
                                        Z2 endstop is pressed
                                        Both endstops are pressed
                                        ?

                                        And post the endstop configuration you are using when testing.

                                        Ian

                                        Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

                                        paolozampini1973undefined 1 Reply Last reply Reply Quote 0
                                        • paolozampini1973undefined
                                          paolozampini1973 @droftarts
                                          last edited by

                                          @droftarts So the problem is not the speech of switches that have to close and open because practically when you give it back home it goes up 15 mm and then it has to do the inversion towards minus putting the separated the inversion towards minus does it however I repeat not get to the switches I have now done a try to take it myself manually the switches work both tested they work it is not a problem of the switches it is a problem towards the plus and then return towards the minus towards the Switch clearly if only one axis works only l the axis is rightly placed sideways

                                          droftartsundefined 2 Replies Last reply Reply Quote 0
                                          • droftartsundefined
                                            droftarts administrators @paolozampini1973
                                            last edited by

                                            @paolozampini1973 Please just do the test and report, using M574 Z1 S1 P"!zstop+!e1stop" for configuration. It won't work with two separate M574 commands.

                                            Ian

                                            Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

                                            paolozampini1973undefined 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA