Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    duet wifi firmware 2.05 triggers not working

    Scheduled Pinned Locked Moved
    Using Duet Controllers
    4
    13
    435
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • martin7404undefined
      martin7404
      last edited by martin7404

      Hi,
      I am trying to set external trigger on duet wifi using M581.
      In the config.g line is

      M581 E1 T3 S1 C0
      

      I am triggering a button connected to E1 end-stop and the LES on the board is lit, but no action.

      When I try M582 T3 from console it runs the trigger3.g file , BUT it run's it every time no mater if the button is on or of and the LED lit or not ?

      Any help please

      P.S the machine have only 1 axis Z , with external driver , no heaters , not tools, no othe axis defined

      Muldex IDEX Duet2+Duex5
      Custom CoreXY 600x400 Hemera , Duet3+Toolboard+1HCL closed loop
      Sapphire Pro with Duet2, with closed-loop motors
      custom high temp E3D tool changer with Duet2+Duex

      alankilianundefined 1 Reply Last reply Reply Quote 0
      • alankilianundefined
        alankilian @martin7404
        last edited by

        @martin7404 According to the M581 description:

        Any trigger number # greater than 1 causes the macro file sys/trigger#.g
        

        So your file should be called trigger3.g not trigger.g

        Maybe that will help.

        SeemeCNC Rostock Max V3 converted to V3.2 with a Duet2 Ethernet Firmware 3.2 and SE300

        martin7404undefined 1 Reply Last reply Reply Quote 0
        • martin7404undefined
          martin7404 @alankilian
          last edited by

          @alankilian ohh sorry my tipo yes indeed it is called trigger3.g

          Muldex IDEX Duet2+Duex5
          Custom CoreXY 600x400 Hemera , Duet3+Toolboard+1HCL closed loop
          Sapphire Pro with Duet2, with closed-loop motors
          custom high temp E3D tool changer with Duet2+Duex

          1 Reply Last reply Reply Quote 0
          • Phaedruxundefined
            Phaedrux Moderator
            last edited by

            What do you have in the trigger file?

            Why still 2.05?

            Z-Bot CoreXY Build | Thingiverse Profile

            martin7404undefined 1 Reply Last reply Reply Quote 0
            • martin7404undefined
              martin7404 @Phaedrux
              last edited by

              @phaedrux yes I have trigger3.g
              I posted it yesterday in the wrong thread.

              Muldex IDEX Duet2+Duex5
              Custom CoreXY 600x400 Hemera , Duet3+Toolboard+1HCL closed loop
              Sapphire Pro with Duet2, with closed-loop motors
              custom high temp E3D tool changer with Duet2+Duex

              1 Reply Last reply Reply Quote 0
              • Phaedruxundefined
                Phaedrux Moderator
                last edited by

                This?

                ;G4 S0.5
                G92 Z8
                G90 G1 Z1 F10000
                G1 Z-2 F100
                G1 Z-1 F6000
                G1 Z-3 F100
                G1 Z-2.5 F6000
                G1 Z-4 F100
                G1 Z-3.5 F6000
                G1 Z-5 F100
                G1 Z-4.5 F6000
                G1 Z-6 F100
                G1 Z-5.5 F6000
                G1 Z-7 F100
                G1 Z-6.5 F6000
                G1 Z-8 F100
                G1 Z-7.5 F6000
                G1 Z-9 F100
                G1 Z-8.5 F6000
                G1 Z-10 F100
                G1 Z-9.5 F6000
                G1 Z-11 F100
                G1 Z-10.5 F6000
                G1 Z-12 F100
                G1 Z-11.5 F6000
                G1 Z-13 F100
                ;G1 Z-12.5 F6000
                ;1 Z-13 F100
                G1 Z8 F5000
                

                Z-Bot CoreXY Build | Thingiverse Profile

                martin7404undefined 1 Reply Last reply Reply Quote 0
                • martin7404undefined
                  martin7404 @Phaedrux
                  last edited by

                  @phaedrux yes

                  Muldex IDEX Duet2+Duex5
                  Custom CoreXY 600x400 Hemera , Duet3+Toolboard+1HCL closed loop
                  Sapphire Pro with Duet2, with closed-loop motors
                  custom high temp E3D tool changer with Duet2+Duex

                  fcwiltundefined 1 Reply Last reply Reply Quote 0
                  • fcwiltundefined
                    fcwilt @martin7404
                    last edited by

                    @martin7404

                    Does the LED on the board change state as you push the button?

                    Frederick

                    Printers: a small Utilmaker style, a small CoreXY and a E3D MS/TC setup. Various hotends. Using Duet 3 hardware running 3.4.6

                    martin7404undefined 1 Reply Last reply Reply Quote 0
                    • martin7404undefined
                      martin7404 @fcwilt
                      last edited by

                      @fcwilt YES

                      Muldex IDEX Duet2+Duex5
                      Custom CoreXY 600x400 Hemera , Duet3+Toolboard+1HCL closed loop
                      Sapphire Pro with Duet2, with closed-loop motors
                      custom high temp E3D tool changer with Duet2+Duex

                      fcwiltundefined 1 Reply Last reply Reply Quote 0
                      • fcwiltundefined
                        fcwilt @martin7404
                        last edited by fcwilt

                        @martin7404 said in duet wifi firmware 2.05 triggers not working:

                        @fcwilt YES

                        And you verified that the button is connected to the E1 endstop and the LED that is changing is for the E1 endstop?

                        Perhaps the documentation for M582 is wrong and it runs the trigger regardless of input state. Notice for v3 firmware there is an option to control this.

                        Frederick

                        Printers: a small Utilmaker style, a small CoreXY and a E3D MS/TC setup. Various hotends. Using Duet 3 hardware running 3.4.6

                        martin7404undefined 1 Reply Last reply Reply Quote 0
                        • martin7404undefined
                          martin7404 @fcwilt
                          last edited by

                          @fcwilt So I switched to 3.1.1 and it is working. Now I have to upgrade and rewire the other duet wifi
                          Thank you all

                          Muldex IDEX Duet2+Duex5
                          Custom CoreXY 600x400 Hemera , Duet3+Toolboard+1HCL closed loop
                          Sapphire Pro with Duet2, with closed-loop motors
                          custom high temp E3D tool changer with Duet2+Duex

                          fcwiltundefined 1 Reply Last reply Reply Quote 0
                          • fcwiltundefined
                            fcwilt @martin7404
                            last edited by

                            @martin7404 said in duet wifi firmware 2.05 triggers not working:

                            @fcwilt So I switched to 3.1.1 and it is working. Now I have to upgrade and rewire the other duet wifi
                            Thank you all

                            Glad to hear it is working.

                            Since you upgraded to 3.1.1 you might as well now upgrade to 3.3.0 or perhaps 3.4.x.

                            Frederick

                            Printers: a small Utilmaker style, a small CoreXY and a E3D MS/TC setup. Various hotends. Using Duet 3 hardware running 3.4.6

                            martin7404undefined 1 Reply Last reply Reply Quote 0
                            • martin7404undefined
                              martin7404 @fcwilt
                              last edited by

                              @fcwilt i am on 3.4 on my printers, but this is just custom drilling automat with 5 axis and 2 spondles with VFD, if it is working it is good enough

                              Muldex IDEX Duet2+Duex5
                              Custom CoreXY 600x400 Hemera , Duet3+Toolboard+1HCL closed loop
                              Sapphire Pro with Duet2, with closed-loop motors
                              custom high temp E3D tool changer with Duet2+Duex

                              1 Reply Last reply Reply Quote 0
                              • First post
                                Last post
                              Unless otherwise noted, all forum content is licensed under CC-BY-SA