Print Job Only Activating 1 of 4 Bed Heaters
-
Hello I am just finishing setting up my printer, and I configured the printer's settings in Cura. I then started the print job, but noticed only one of the 4 heated bed zones. How can I fix this? I did manually change the SP of the other zones to the same value but I don't want to do this every time....
-
How do you have the 4 bed configured? Post your config.g.
@feynman137 said in Print Job Only Activating 1 of 4 Bed Heaters:
I did manually change the SP of the other zones to the same value
I don't understand what this means. What is the SP?
Is Cura capable of controlling 4 different heat beds? You may need to get creative with your start gcode and cura variables to pass the Cura temperature values to separate commands for each heater.
-
@phaedrux I'm assuming SP is set point
-
As always, a bit more information about your machine would help understand the problem. Physical setup, intended use, configuration files, ...
