Bed Leveling on a Railcore 300ZL ..problems

[ObiWan2Print]

Re: Max Bed Level Compensation Z probe not triggered G32

[ObiWan2Print]

So I am having problems getting my bed to level. The probe seems to be working but after running G32 I get the error message: g32
Error: Some computed corrections exceed configured limit of 2.00mm: 0.463 4.487 -1.012. Any suggestions on how to resolve this error?

[jay_s_uk]

@obiwan2print increase the S value in M671 to something like 10

[fcwilt]

@obiwan2print

Have you tried Increasing the S parameter in your M671 command.

Frederick