I could use some help

@fcwilt got it, I've offended you. Please accept my apologies. I've spent 70 years making life miserable for others. It's hard to get out of that habit.

@fcwilt I'm not opposed to buying a decent bed. Given that the one I have on this printer now has failed the PID tests horribly, I'm looking for a good bed. Any recommendations you can provide (preferably links that will make you some money), would be appreciated.

fcwilt

@mac said in I could use some help:

@fcwilt got it, I've offended you. Please accept my apologies. I've spent 70 years making life miserable for others. It's hard to get out of that habit.

I'm not offended at all.

I'm glad we are making progress.

I hope we can get Z working.

If we can do that, I think you can get X and Y working on your own since the issues are the same and the homing code is pretty much the same, just specifying a different axis.

I am running out of time today though.

Frederick

@fcwilt My BLV rebuild of my old Anet A8 had linear rails. Marvelous kit, those. I still have them, and putting them on this POS seems possible with a little elbow grease and a drill press (both of which I have).

@fcwilt got it, ship me the X and Y code please. I'll test Z right now to confirm that the changes accomplished what I may have to use to correct X and Y if they aren't up to snuff.

fcwilt

@mac said in I could use some help:

@fcwilt I'm not opposed to buying a decent bed. Given that the one I have on this printer now has failed the PID tests horribly, I'm looking for a good bed. Any recommendations you can provide (preferably links that will make you some money), would be appreciated.

I know very little about your type of printer. I know that some popular models have upgrade parts available from different sources.

I just upgraded the bed on my E3D Tool Changer printer with a bed from Mandela Rose Works (I think that is the correct spelling).

Frederick

@fcwilt Z went up, and then it went down. It sounded like a real printer / that's a first. My guess is, it's about 30mm off the bed at the moment. I think that was a choice in the RRF? That the first time Z homed, it stopped at 30 above?

@fcwilt I'll google them and go from there.

@fcwilt if you have the time, please send the X and Y code, then be off with you to your own time, and thank you in advance.

fcwilt

@mac said in I could use some help:

@fcwilt got it, ship me the X and Y code please. I'll test Z right now to confirm that the changes accomplished what I may have to use to correct X and Y if they aren't up to snuff.

OK

Homing X should look something like this:

G91
G1 H1 X-230 F3600
G1 X15
G1 H1 X-10 F360

G90
G1 X110 F3600 ; this just moves X to the centerline of the bed - doesn't matter where - it can be any place at all that suits you.

Homing Y should look something like this:

G91
G1 H1 Y-230 F3600
G1 Y15
G1 H1 Y-10 F360

G90
G1 Y110 F3600 ; this just moves Y to the centerline of the bed - doesn't matter where - it can be any place at all that suits you.

Now I would do homeall.g like this:

M98 P"homeZ.g"
M98 P"homeX.g"
M98 P"homeY.g"

It is not as efficient as it can be but it does re-use the code you already have in the other axis homing files.

Now I have no idea what kinds of speeds your printer is capable off. I just used F3600 and F360 since they should be workable and safe. Feel free to pick other speeds as suits you.

Frederick

@fcwilt thanks very much. hopefully, I'll be printing the next time we speak.

fcwilt

@mac said in I could use some help:

@fcwilt thanks very much. hopefully, I'll be printing the next time we speak.

Did you get Z homing to work?

Frederick

@fcwilt Let's talk later. If I make a video of it, I'll send you a link.

This post is deleted!

@fcwilt

G91                      ; relative positioning
G1 H2 Z5 F3600           ; lift Z relative to current position
G1 H1 X225 Y225 F1800    ; move quickly to X and Y axis endstops and stop there (first pass)
G1 H2 X-5 Y-5 F3600      ; go back a few mm
G1 H1 X225 Y225 F360     ; move slowly to X and Y axis endstops once more (second pass)
G90                      ; absolute positioning
G1 X-10.875 Y4.375 F3600 ; go to first bed probe point and home Z
G30                      ; home Z by probing the bed

This is the code that's in the system. It doesn't look like your suggestion? So I'm not sure how to proceed.

fcwilt

@mac said in I could use some help:

@fcwilt

G91                      ; relative positioning
G1 H2 Z5 F3600           ; lift Z relative to current position
G1 H1 X225 Y225 F1800    ; move quickly to X and Y axis endstops and stop there (first pass)
G1 H2 X-5 Y-5 F3600      ; go back a few mm
G1 H1 X225 Y225 F360     ; move slowly to X and Y axis endstops once more (second pass)
G90                      ; absolute positioning
G1 X-10.875 Y4.375 F3600 ; go to first bed probe point and home Z
G30                      ; home Z by probing the bed

This is the code that's in the system. It doesn't look like your suggestion? So I'm not sure how to proceed.

As I mentioned that is the code for homing with a Z probe.

You have a Z endstop switch as well so you can use that, instead of the Z probe, and get quicker and simpler homing.

We discussed getting rid of that code and replacing it with my code.

What happened to doing that?

Frederick

@fcwilt

; homeall.g
; called to home all axes
;
; generated by RepRapFirmware Configuration Tool v3.3.10 on Mon Jun 27 2022 06:45:01 GMT-0700 (Pacific Daylight Time)
M98 P"homeZ.g"
M98 P"homeX.g"
Mpo P"homeY.g"

; Uncomment the following lines to lift Z after probing
;G91                     ; relative positioning
;G1 Z5 F60               ; lift Z relative to current position
;G90                     ; absolute positioning

This is what I put in homeall.g's place.

@fcwilt link text

The is Z homing again.

fcwilt

@mac said in I could use some help:

@fcwilt

; homeall.g
; called to home all axes
;
; generated by RepRapFirmware Configuration Tool v3.3.10 on Mon Jun 27 2022 06:45:01 GMT-0700 (Pacific Daylight Time)
M98 P"homeZ.g"
M98 P"homeX.g"
Mpo P"homeY.g"

; Uncomment the following lines to lift Z after probing
;G91                     ; relative positioning
;G1 Z5 F60               ; lift Z relative to current position
;G90                     ; absolute positioning

This is what I put in homeall.g's place.

So you where showing me the code from homeall.g - I misunderstood.

That code you now have will work fine IF the individual homing files work.

You can strip it down to this:

; homeall.g
; called to home all axes

M98 P"homeZ.g"
M98 P"homeX.g"
M98 P"homeY.g"

But don't test it until you have verified that homing each axis by itself is working.

Frederick

@fcwilt that's what I'm working on right now.