Bed Heater PID Tune Warning.

[Dizzwold]

Hi Guys,

I've just ran a 2nd bed pid tune and recieved the following warning. The heater and bed is still the original Tronxy X5SA Pro 330 x 330;

Is this anything to be concerned about?

[jay_s_uk]

@Dizzwold you'll probably be ok. Just run with those values and see if you get any heater faults

[Phaedrux]

What did the graph look like during tuning?

[Dizzwold]

This post is deleted!

[Dizzwold]

@Phaedrux
I don't actually remember, I don't remember seeing anything unusual.

May be best to do it again, also if you look at my bed compensation in the following thread;
https://forum.duet3d.com/topic/30383/twin-z-axis-motors-and-mbla/9?_=1668068238105