Layer chart empty
-
My payer chart is empty, showing no information at all. Vesion 3.4.3 duet3 SBC mode.
Is something due to the slicer not generating some particular gcode or something? Im using kisslicer -
-
@jay_s_uk I currently don't have access to my slicers, but @Dougal1957 may know (-;
-
@jay_s_uk Here you have:
; Prepare for End-Of-Layer
G1 X23.373 Y284.669 E1.92904
G1 X23.374 Y293.452 E0.2921
G1 X23.374 Y295.588 E0.07106
G1 X23.374 Y297.329 E0.05791
G1 X23.565 Y297.707 E0.01409
G1 X23.98 Y298.039 E0.01766
G1 X23.968 Y298.245 E0.00687
G1 X23.724 Y299.227 E0.03368
G1 X23.682 Y299.69 E0.01544
G1 X23.656 Y299.968 E0.00928
G1 X23.648 Y300.062 E0.00315
; time estimate: pre = 90.957397, post = 83.438141
; Dwell time remaining = -63.438145
; END_LAYER_OBJECT z=30.400
;
; *** Every 1 Layers ***
M141 S170
G10 S410
G92 E0
;
; BEGIN_LAYER_OBJECT z=30.600 z_thickness=0.200
;
; 'Loop Path', 1.1 [feed mm/s], 32.0 [head mm/s]
; Chain Extrusion
G1 X23.588 Y300.072 Z30.6 E0.00694 F300
; Chain flows: 0.400 -> 2.560
; head speed 32.000008, filament speed 1.064329, preload 0.000000
G1 X23.601 Y299.96 E0.00376 F1920
G1 X23.64 Y299.623 E0.01129
G1 X23.705 Y299.061 E0.01882
G1 X24.003 Y298.033 E0.0356
G1 X24.036 Y297.925 E0.00374
G1 X23.532 Y297.546 E0.02098
G1 X23.374 Y297.13 E0.0148
G1 X23.374 Y295.397 E0.05766
G1 X23.374 Y293.296 E0.06986
G1 X23.374 Y257.894 E1.17749
G1 X23.369 Y226.45 E1.04584
G1 X23.525 Y225.998 E0.01589
G1 X23.811 Y225.765 E0.01228
G1 X24.408 Y225.742 E0.01988
G1 X25.872 Y225.742 E0.04869
G1 X25.867 Y219.108 E0.22065
G1 X25.848 Y218.979 E0.00435
G1 X23.909 Y218.975 E0.06449
G1 X23.599 Y218.828 E0.01141
G1 X23.417 Y218.537 E0.01142
G1 X23.373 Y218.035 E0.01677
G1 X23.384 Y209.835 E0.27273
G1 X23.541 Y209.325 E0.01774
G1 X23.914 Y208.844 E0.02025
G1 X24.406 Y208.55 E0.01906
G1 X24.903 Y208.445 E0.0169
G1 X87.058 Y208.442 E2.06728
G1 X110.514 Y208.447 E0.78017
G1 X111.041 Y208.574 E0.01802
G1 X111.499 Y208.875 E0.01821
G1 X111.824 Y209.302 E0.01786
G1 X111.987 Y209.803 E0.01754
G1 X112.006 Y210.765 E0.03201
G1 X112.006 Y218.404 E0.25408
G1 X111.81 Y218.757 E0.01341
G1 X111.44 Y218.975 E0.01428
G1 X109.281 Y218.978 E0.0718
G1 X109.026 Y218.979 E0.00848
G1 X109.007 Y219.368 E0.01294
G1 X109.008 Y225.743 E0.21205
G1 X111.342 Y225.75 E0.07765
G1 X111.695 Y225.838 E0.0121
G1 X111.937 Y226.079 E0.01134
G1 X112.007 Y226.398 E0.01087
G1 X112.007 Y285.785 E1.97523
G1 X112.01 Y313.34 E0.9165
G1 X111.899 Y313.675 E0.01173
G1 X111.596 Y313.951 E0.01362
G1 X111.076 Y313.978 E0.01732
G1 X109.024 Y313.978 E0.06824
G1 X109.006 Y314.408 E0.01432
G1 X109.015 Y320.633 E0.20703
G1 X109.073 Y320.741 E0.0041
G1 X111.391 Y320.746 E0.07708
G1 X111.772 Y320.916 E0.01388
G1 X111.985 Y321.199 E0.01179
G1 X112.008 Y321.606 E0.01354
G1 X112.003 Y329.796 E0.27243
G1 X111.873 Y330.324 E0.01806
G1 X111.566 Y330.778 E0.01823
G1 X111.124 Y331.105 E0.01827
G1 X110.648 Y331.26 E0.01668
G1 X109.804 Y331.277 E0.02807
G1 X58.419 Y331.278 E1.70908
G1 X28.731 Y331.274 E0.98741
G1 X28.329 Y331.128 E0.01424
G1 X28.097 Y330.84 E0.01228
G1 X28.073 Y330.306 E0.01779
G1 X28.07 Y325.333 E0.16542
G1 X27.922 Y324.562 E0.02612
G1 X27.853 Y323.659 E0.03009
G1 X28.018 Y322.577 E0.03641
G1 X28.073 Y322.147 E0.01444
; Prepare for Perimeter
G1 X28.066 Y305.741 E0.54564
G1 X28.026 Y305.608 E0.00464
G1 X27.331 Y305.447 E0.02373
G1 X26.531 Y305.123 E0.0287
G1 X25.671 Y304.576 E0.03391
G1 X24.938 Y303.889 E0.03343
G1 X24.61 Y303.436 E0.01859
G1 X24.347 Y303.073 E0.0149
G1 X24.117 Y302.607 E0.01727
G1 X24.04 Y302.45 E0.00584
; Perimeter Length = 434.834534
;
; 'Perimeter Path', 1.1 [feed mm/s], 32.0 [head mm/s]
; Chain Extrusion
G1 X23.979 Y302.322 E0.00471
; Chain flows: 2.560 -> 0.000
; head speed 32.000008, filament speed 1.064329, preload 0.000000
; unsupported segments 3
; Unsupported degree: 0.605618
; Overhang(46.9)
; Unsupported Fan = 0 (from 0)
G1 X23.946 Y302.245 E0.00277
G1 X23.865 Y301.967 E0.00964
G1 X23.725 Y301.49 E0.01654
G1 X23.724 Y301.457 E0.0011
G1 X23.739 Y301.427 E0.0011
G1 X23.766 Y301.408 E0.0011
G1 X23.979 Y301.33 E0.00755
G1 X24.054 Y301.255 E0.00353
G1 X24.07 Y301.23 E0.00096
G1 X24.074 Y301.202 E0.00096
G1 X23.983 Y300.174 E0.03433
G1 X24.091 Y299.159 E0.03392
G1 X24.365 Y298.21 E0.03288
G1 X24.526 Y297.846 E0.01323
G1 X24.529 Y297.802 E0.00148
G1 X24.504 Y297.765 E0.00148
G1 X23.869 Y297.309 E0.026
G1 X23.77 Y297.04 E0.00952
G1 X23.769 Y226.476 E2.34699
G1 X23.897 Y226.185 E0.01059
G1 X23.922 Y226.156 E0.00126
G1 X23.958 Y226.145 E0.00126
G1 X26.209 Y226.146 E0.07486
G1 X26.242 Y226.137 E0.00115
G1 X26.267 Y226.113 E0.00114
G1 X26.276 Y226.079 E0.00115
G1 X26.273 Y218.692 E0.24569
G1 X26.247 Y218.597 E0.00328
G1 X26.223 Y218.562 E0.00144
G1 X26.182 Y218.548 E0.00143
G1 X24.215 Y218.578 E0.06542
G1 X23.91 Y218.56 E0.01017
G1 X23.871 Y218.545 E0.00137
G1 X23.849 Y218.51 E0.00137
G1 X23.773 Y218.219 E0.00999
G1 X23.778 Y209.939 E0.2754
G1 X23.941 Y209.44 E0.01748
G1 X24.246 Y209.09 E0.01543
G1 X24.774 Y208.855 E0.01922
G1 X30.548 Y208.843 E0.19203
G1 X65.129 Y208.842 E1.15017
G1 X110.509 Y208.847 E1.50938
G1 X110.996 Y209.004 E0.01698
G1 X111.356 Y209.305 E0.01562
G1 X111.591 Y209.838 E0.01938
G1 X111.605 Y211.679 E0.06125
G1 X111.611 Y218.316 E0.22073
G1 X111.444 Y218.533 E0.00913
G1 X111.423 Y218.551 E0.00091
G1 X111.396 Y218.559 E0.00092
G1 X111.165 Y218.578 E0.0077
G1 X108.71 Y218.578 E0.08167
G1 X108.668 Y218.593 E0.00148
G1 X108.645 Y218.631 E0.00148
G1 X108.604 Y218.824 E0.00655
G1 X108.605 Y226.079 E0.24132
G1 X108.614 Y226.113 E0.00115
G1 X108.638 Y226.137 E0.00115
G1 X108.672 Y226.146 E0.00115
G1 X111.313 Y226.147 E0.08784
G1 X111.535 Y226.224 E0.00782
G1 X111.564 Y226.244 E0.00117
G1 X111.578 Y226.276 E0.00117
G1 X111.605 Y226.438 E0.00544
G1 X111.607 Y294.024 E2.24795
G1 X111.613 Y313.339 E0.6424
G1 X111.468 Y313.544 E0.00836
G1 X111.444 Y313.565 E0.00105
G1 X111.413 Y313.572 E0.00105
G1 X108.856 Y313.575 E0.08506
G1 X108.672 Y313.575 E0.00612
G1 X108.638 Y313.584 E0.00115
G1 X108.614 Y313.608 E0.00114
G1 X108.605 Y313.641 E0.00115
G1 X108.605 Y314.133 E0.01636
G1 X108.609 Y321.046 E0.22993
G1 X108.615 Y321.075 E0.00096
G1 X108.633 Y321.097 E0.00097
G1 X108.69 Y321.145 E0.00245
G1 X108.71 Y321.156 E0.00077
G1 X108.733 Y321.16 E0.00078
G1 X111.335 Y321.15 E0.08656
G1 X111.557 Y321.27 E0.0084
G1 X111.581 Y321.292 E0.0011
G1 X111.592 Y321.324 E0.0011
G1 X111.608 Y321.547 E0.00745
G1 X111.602 Y329.793 E0.27427
G1 X111.442 Y330.276 E0.01691
G1 X111.133 Y330.634 E0.01573
G1 X110.608 Y330.864 E0.01907
G1 X108.576 Y330.876 E0.06756
G1 X38.232 Y330.878 E2.33969
G1 X36.105 Y330.878 E0.07074
G1 X34.364 Y330.878 E0.05789 F1855.6
G1 X33.01 Y330.878 E0.04503 F1791.2
G1 X32.042 Y330.878 E0.03219 F1726.8
G1 X31.461 Y330.878 E0.01934 F1662.3
G1 X31.266 Y330.878 E0.00649 F1597.9
G1 X31.11 Y330.878 E0.00519 F1533.5
G1 X30.642 Y330.877 E0.01557 F1469.1
G1 X29.862 Y330.875 E0.02594 F1404.7
G1 X28.77 Y330.873 E0.03633 F1340.3
G1 X28.535 Y330.767 E0.00854 F1275.8
G1 X28.509 Y330.745 E0.00115 F1211.4
G1 X28.497 Y330.713 E0.00115
G1 X28.476 Y330.502 E0.00706
G1 X28.472 Y329.013 E0.04953
G1 X28.467 Y327.228 E0.05937
G1 X28.462 Y325.146 E0.06922
G1 X28.325 Y324.564 E0.01989
G1 X28.255 Y323.678 E0.02955
G1 X28.367 Y322.809 E0.02917
G1 X28.476 Y322.409 E0.01378
G1 X28.474 Y308.747 E0.45441
G1 X28.474 Y306.912 E0.06103
G1 X28.474 Y305.376 E0.05108
G1 X28.462 Y305.337 E0.00135
G1 X28.43 Y305.313 E0.00134
G1 X28.259 Y305.253 E0.00601
G1 X27.595 Y305.112 E0.02259 F1275.8
G1 X26.713 Y304.757 E0.03163 F1340.3
G1 X26.245 Y304.463 E0.01836 F1404.7
G1 X25.904 Y304.248 E0.01342 F1469.1
G1 X25.633 Y304.004 E0.01213 F1533.5
G1 X25.52 Y303.89 E0.00532 F1597.9
G1 X25.181 Y303.551 E0.01596 F1662.3
G1 X24.678 Y302.826 E0.02933 F1726.8
G1 X24.264 Y301.914 E0.03333 F1791.2
G1 X24.084 Y301.277 E0.02202 F1855.6
G1 X24.065 Y301.246 E0.0012 F1920
G1 X24.032 Y301.23 E0.0012
G1 X23.706 Y301.165 E0.01109
G1 X23.669 Y301.144 E0.00141
G1 X23.652 Y301.105 E0.00141
G1 X23.608 Y300.572 E0.01779
G1 X23.583 Y300.266 E0.0102
G1 X23.582 Y300.184 E0.00272
;
; 'Loop Path', 1.1 [feed mm/s], 32.0 [head mm/s]
G1 X23.009 Y299.143 E0 F15000
; head speed 32.000008, filament speed 1.064329, preload 0.000000
; Prepare for Loop
G1 X23.01 Y299.047 E0.0032 F1920
G1 X23.012 Y298.759 E0.0096
G1 X23.016 Y298.278 E0.01599
G1 X23.303 Y298.01 E0.01306
G1 X23.429 Y297.986 E0.00427
G1 X23.545 Y298.076 E0.00488
G1 X23.384 Y298.736 E0.02259
G1 X23.265 Y299.221 E0.01661
G1 X23.248 Y299.348 E0.00428
G1 X23.061 Y299.266 E0.0068
G1 X23.009 Y299.143 E0.00442
;
; 'Destring/Wipe/Jump Path', 0.0 [feed mm/s], 68.0 [head mm/s]
; 'Destring Suck' by 'A'
G1 E-1 F1125
; head speed 68.000008, filament speed 0.000000, preload 0.000000
G1 X23.009 Y299.143 Z31.6 E0 F300
;
; 'Loop Path', 1.1 [feed mm/s], 32.0 [head mm/s]
G1 X22.609 Y328.81 E0 F15000
G1 X22.609 Y328.81 Z30.6 E0 F300
; 'Destring Prime'
G1 E1 F1125
; Chain flows: 0.000 -> 2.560
; head speed 32.000008, filament speed 1.064329, preload 0.000000
G1 X22.609 Y328.614 E0.00653 F1920
G1 X22.609 Y328.025 E0.0196
G1 X22.609 Y327.042 E0.03267
G1 X22.609 Y325.667 E0.04574
G1 X22.609 Y323.899 E0.05881
G1 X22.609 Y321.738 E0.07187
G1 X22.608 Y284.61 E1.23489
G1 X22.616 Y208.956 E2.51626
G1 X22.717 Y208.512 E0.01517
G1 X22.983 Y208.109 E0.01606
G1 X23.371 Y207.821 E0.01606
G1 X23.815 Y207.69 E0.01541
G1 X27.066 Y207.678 E0.10811
G1 X99.22 Y207.677 E2.39987
G1 X111.461 Y207.683 E0.40713
G1 X111.986 Y207.809 E0.01796
G1 X112.423 Y208.139 E0.01823
G1 X112.701 Y208.613 E0.01826
G1 X112.772 Y209.243 E0.0211
G1 X112.766 Y330.741 E4.04106
G1 X112.637 Y331.28 E0.01843
G1 X112.341 Y331.657 E0.01593
G1 X111.955 Y331.927 E0.01565
G1 X111.392 Y332.039 E0.0191
G1 X82.205 Y332.042 E0.97078
; Prepare for Perimeter
G1 X30.015 Y332.04 E1.73585
G1 X27.974 Y332.04 E0.06788
G1 X26.288 Y332.039 E0.05606
G1 X24.958 Y332.039 E0.04426
G1 X24.17 Y331.899 E0.02661
G1 X23.614 Y331.595 E0.02109
G1 X23.368 Y331.378 E0.01093
G1 X23.286 Y331.305 E0.00364
; Perimeter Length = 431.670105
;
; 'Perimeter Path', 1.1 [feed mm/s], 32.0 [head mm/s]
; Chain Extrusion
G1 X23.191 Y331.211 E0.00443
; Chain flows: 2.560 -> 0.000
; head speed 32.000008, filament speed 1.064329, preload 0.000000
G1 X23.146 Y331.162 E0.00222
G1 X23.006 Y330.923 E0.0092
G1 X22.758 Y330.5 E0.01632
G1 X22.677 Y330.23 E0.00938
G1 X22.659 Y330.201 E0.00112
G1 X22.63 Y330.184 E0.00113
G1 X22.267 Y330.091 E0.01247
G1 X22.231 Y330.067 E0.00143
G1 X22.217 Y330.026 E0.00143
G1 X22.212 Y329.189 E0.02785
G1 X22.206 Y328.18 E0.03356
G1 X22.206 Y326.349 E0.0609
G1 X22.207 Y324.134 E0.07368
G1 X22.212 Y208.986 E3.82985
G1 X22.325 Y208.399 E0.01986
G1 X22.613 Y207.925 E0.01845
G1 X23.072 Y207.521 E0.02036
G1 X23.631 Y207.308 E0.01989
G1 X25.055 Y207.278 E0.04737
G1 X97.205 Y207.276 E2.39971
G1 X111.425 Y207.28 E0.47298
G1 X112.035 Y207.391 E0.02063
G1 X112.561 Y207.716 E0.02053
G1 X112.948 Y208.184 E0.0202
G1 X113.149 Y208.748 E0.01994
G1 X113.172 Y210.78 E0.06759
G1 X113.172 Y253.258 E1.41281
G1 X113.172 Y295.551 E1.40669
G1 X113.171 Y330.639 E1.16704
G1 X113.082 Y331.238 E0.02012
G1 X112.816 Y331.734 E0.01872
G1 X112.365 Y332.156 E0.02056
G1 X111.841 Y332.391 E0.01909
G1 X111 Y332.442 E0.02802
G1 X53.799 Y332.443 E1.90251
G1 X24.945 Y332.439 E0.9597
G1 X24.277 Y332.344 E0.02245
G1 X23.718 Y332.134 E0.01986
G1 X23.168 Y331.756 E0.0222
G1 X22.676 Y331.209 E0.02445
G1 X22.36 Y330.582 E0.02335
G1 X22.255 Y330.13 E0.01546
G1 X22.258 Y330.09 E0.00133
G1 X22.283 Y330.059 E0.00133
G1 X22.455 Y329.946 E0.00682
G1 X22.572 Y329.927 E0.00396
G1 X22.602 Y329.915 E0.00106
G1 X22.622 Y329.891 E0.00105
G1 X22.628 Y329.86 E0.00104
G1 X22.615 Y329.285 E0.01915
G1 X22.609 Y328.999 E0.0095
G1 X22.609 Y328.965 E0.00114
;
; 'Loop Path', 1.1 [feed mm/s], 32.0 [head mm/s]
G1 X23.043 Y329.998 E0 F15000
; Chain flows: 0.000 -> 2.560
; head speed 32.000008, filament speed 1.064329, preload 0.000000
G1 X23.039 Y329.894 E0.00349 F1920
G1 X23.028 Y329.579 E0.01046
G1 X23.009 Y329.055 E0.01744
G1 X23.009 Y328.01 E0.03476
G1 X23.01 Y326.581 E0.04755
G1 X23.01 Y324.766 E0.06036
G1 X23.011 Y322.566 E0.07316
G1 X23.017 Y301.286 E0.70779
G1 X23.081 Y301.171 E0.00439
G1 X23.259 Y301.103 E0.00631
G1 X23.459 Y302.033 E0.03163
G1 X23.754 Y302.783 E0.02681
G1 X24.181 Y303.555 E0.02934
G1 X24.808 Y304.34 E0.03342
G1 X25.623 Y305.04 E0.03575
G1 X26.577 Y305.594 E0.03668
G1 X27.673 Y305.977 E0.0386
G1 X27.666 Y322.391 E0.54594
G1 X27.534 Y322.923 E0.01822
G1 X27.45 Y323.938 E0.0339
G1 X27.596 Y325.047 E0.03718
G1 X27.672 Y325.508 E0.01555
G1 X27.676 Y330.752 E0.17442
G1 X27.816 Y331.137 E0.01363
G1 X27.889 Y331.264 E0.00486
G1 X27.712 Y331.64 E0.01383
G1 X26.797 Y331.643 E0.03041
G1 X25.756 Y331.635 E0.03462
G1 X24.85 Y331.628 E0.03015
G1 X24.329 Y331.522 E0.01767
G1 X23.788 Y331.232 E0.02044
G1 X23.33 Y330.747 E0.02218
G1 X23.182 Y330.407 E0.01232
G1 X23.08 Y330.171 E0.00855
G1 X23.043 Y329.998 E0.00588
;
; 'Loop Path', 1.1 [feed mm/s], 32.0 [head mm/s]
; Chain Extrusion
G1 X23.421 Y329.849 E0.01354 -
-
@Tinchus the issue here is that Kisslicer doesn't put layer number comments in the GCode file. This likely means that it supports variable layer height, and layer numbers don't really mean anything if the slicer uses different layer heights for perimeters and infill. The nearest Kisslicer gets to later number comments is the comments such as this one:
; BEGIN_LAYER_OBJECT z=30.600 z_thickness=0.200
Now that layer number has lost its meaning with some slicers, perhaps we should do away with the layer chart altogether?
-
@dc42 the layer chart is using up a lot of real estate on the web interface and it has limited informational density. I think it would be fine to relegate it to a plugin or excising it completely to regain that real estate.
In the past it was something to look at while the machine was printing, but these days we have @Sindarius' 3d viewer which is way more useful and entertaining in my opinion (-:
-
@oliof i concur
-
undefined oliof referenced this topic 5 Dec 2022, 09:42
-
@oliof Where is that 3d viwer? the one already included on DWC somehow went wrong on latest update and I find it almost of really not much help.
With latest update all it does is to load some kind of 3d representation, with no borders at all so basically is really difficult to see what is going on. Also I know that is showing the real time progress, but since that progress is happening somewhere, it is not visible because the hole gcode is simulated, to the real time advance is "buried" inside the 3d representation:
-
@Tinchus probably worth a new thread with @Sindarius
-
@Tinchus I recommend changing the quality settings in the viewer. Sometimes after an update it internally drops to the lowest setting. By setting it to a value it clears a flag and should render properly
-
@Sindarius s far I have tested changing from SBC all the way up to medium. Also, the real time simulation is not working: it is being rendered, but the simulation buries everything, so you cant really see what is being printed
I hae just checked: the iamge I posted, that image is suposed to be HIGH quality rendering -
The real time simulation is buried on the hole gcode simulation.
-
@Tinchus Set the rendering to max, I believe that this version of BabylonJS had an issue with line rendering where it was not behaving properly. I have a new version of the viewer in the works that addresses this issue.
-
@Sindarius that made the trick! thanks
