Duet 2 Ethernet - no Ethernet after Firmware upgrade

xxexx

@droftarts all 3 fuses are fine,

droftarts

@xxexx Is config.g being executed when powered from VIN? I don't know why it wouldn't be, and can't think of a way of checking without plugging in USB. You can connect USB under VIN power; you just need to take some precautions. See https://docs.duet3d.com/User_manual/Overview/USB_ground_loops
What firmware version were you on previously? Maybe rerun the update, or try reverting to the previous version you were using. Though I can't think why the firmware version would be causing this issue.

Ian

xxexx

@droftarts

droftarts

@xxexx I think the voltage regulators look okay. How old is this board? Where did you buy it from?

Ian

xxexx

@droftarts

i checked the system directory: it is empty (!). I now try to install the Duet2combinedfirmware .bin file - "Connection lost, attempting to reconnect..."

jay_s_uk

@xxexx sounds like the sd card has been wiped then. maybe try a different sd card

xxexx

@jay_s_uk

i now did copy all installation files on the SD Card again and the bboard did reboot and reinstall firmware when connected to USB Power.

but ths Sytem directoty shows only:

jay_s_uk

@xxexx thats incorrect. whats in sys on the SD card?

xxexx

@jay_s_uk

jay_s_uk

@xxexx then you need to put all your config files back. hopefully you've got a backup otherwise use the configurator to generate a base set of files

xxexx

@jay_s_uk

xxexx

@jay_s_uk

oh fuck me, i dont have a backup and it took me days to get everything right incl. the bltouch - i guess i just learned to make backups...

Any way, thanks a lot for your help, id did not occur to me to check the SD Card