3.5 B3 Toolboard stepper intermittently running backwards

[dc42]

@Exerqtor the dedicated LED port is known as "led" in the firmware. This needs to be added to the documentation.

[Exerqtor]

@dc42 Then i bet a beer on the problem being solved for both me and @ctilley79 now that we know that. Thx!

[ctilley79]

This post is deleted!

[ctilley79]

@Exerqtor said in 3.5 B3 Toolboard stepper intermittently running backwards:

@dc42 Then i bet a beer on the problem being solved for both me and @ctilley79 now that we know that. Thx!

Does the M150 P parameter to work for you on this firmware build? I'm also using RGBW neopixels. The P parameter does nothing right now.

[Exerqtor]

@ctilley79 said in 3.5 B3 Toolboard stepper intermittently running backwards:

@Exerqtor said in 3.5 B3 Toolboard stepper intermittently running backwards:

@dc42 Then i bet a beer on the problem being solved for both me and @ctilley79 now that we know that. Thx!

Does the M150 P parameter to work for you on this firmware build? I'm also using RGBW neopixels. The P parameter does nothing right now.

I don't use the P parameter, only the R/G/B/W component "amount", it should yeld the same result although you would have to play around with the values to get the same effect.

[dc42]

@ctilley79 you are correct, the P parameter doesn't work for Neopixels. I will correct this before we release beta4.

[hestiahuang]

@dc42 said in 3.5 B3 Toolboard stepper intermittently running backwards:

@ctilley79 you are correct, the P parameter doesn't work for Neopixels. I will correct this before we release beta4.

May I know how to define M950 for Duet2Wifi? It can use M150 directly before, however it is failed and need definition first now. But not pin name found...

[hestiahuang]

@hestiahuang said in 3.5 B3 Toolboard stepper intermittently running backwards:

@dc42 said in 3.5 B3 Toolboard stepper intermittently running backwards:

@ctilley79 you are correct, the P parameter doesn't work for Neopixels. I will correct this before we release beta4.

May I know how to define M950 for Duet2Wifi? It can use M150 directly before, however it is failed and need definition first now. But not pin name found...

Add the source code to confirm my finding.

[hestiahuang]

so don't miss Duet2Wifi...

[dc42]

@hestiahuang thanks, this is now fixed ready for 3.5beta4.