Resume APF not working

Phaedrux

@Phaedrux So when we get updated firmware its causing problems at customer end.

Can you be more specific?

R006

@Phaedrux
In what context?
Sometimes they use PanelDue SD card for printing

Phaedrux

I don't have a time frame on that, sorry. Thank you for bringing it to our attention though. Secondary SD card printing is fairly uncommon.

R006

@Phaedrux okay,
Any suggestions on how I can update this from my end?

Phaedrux

Update what?

R006

@Phaedrux
If I want to fix this problem which firmware should be update panel or mainboard?

Phaedrux

It likely doesn't work in any current firmware.

R006

@Phaedrux
Ok.
Thank you for your support.
And waiting for update in firmware.

dc42

@R006 I think the issue may be that the SD card in PanelDue was not mounted when you ran M916. Try viewing the contents of that SD card before you run M916. Alternatively, add command M21 P1 to your resurrect-prologue.g file.

R006

@dc42 thank you it's working.

dc42

@R006 thanks, I've logged https://github.com/Duet3D/RepRapFirmware/issues/912/

dc42 created this issue in Duet3D/RepRapFirmware

Resume APF not working

open Resume after power fail when print is from external SD card (standalone mode) #912