Duet 0.8.5 firmware upgrade

droftarts

@StuartMoorhouse You should be on 1.26.1, this is the latest for Duet 0.85, and is bundled in with 2.05.1 for Duet 2.

Send M115 and post response to check.

The firmware will run whatever file is at sys/config.g at startup. Probably best to rename your old sys folder ‘sysold’ and move the new sys folder out of there and to the root.

Ian

droftarts

I expect the network issue with the new config is that you haven’t copied the settings from the old config to the new one.

You just click on the file name to select a file to print, or right click for options.

Hard to say where you have put everything. Perhaps post a screenshot of the file layout, and post your new config.g file.

See this guide for using ‘filaments’: https://duet3d.dozuki.com/Wiki/Filaments

Ian

StuartMoorhouse

@droftarts I think were back up and running now. I hadn't changed the IP address when creating the new config.g file, Id taken note of what it defaulted at and then tried to connect to that. I changed that and then I was able to connect.

Still having the strange banding issues but thats not for this topic.
Thanks for your help.

DeltaSS

Hello.
I don't want to start a new thread and flood the forum. so I'm asking here.
I bought an older 3D Delta with Duet 0.8.5. company -1.10
according to the order in this thread, I updated to 1.26.1 and WBC 2.0.4

I wonder if it is the final version for 0.8.5?
or is it possible to upgrade even higher to 3.0 and below?
thanks for advice
sorry, I'm using Google translator

Phaedrux

@DeltaSS 1.26 is the last for that board. https://github.com/Duet3D/RepRapFirmware/releases/tag/2.05.1

DeltaSS

OK, thanks for the answer.
and I still have a question.
I have WBControl for this version (1.26).
Is it possible to upgrade only Webcontrol? or does its function depend on the type of board or firmware?
I tried from version 3.4.6 but failed.

jay_s_uk

@DeltaSS you need to keep the version for that firmware

dc42

@DeltaSS afair you can use either DWC 1.26 or 2.02 with that version. You can't use the later 3.x versions of DWC because they depend on the object model, which RRF for Duet 085 doesn't support.

Phaedrux

Even DWC 2.0.7 may work. For some reason that version sticks out in my mind. But it's been a while.

Alex4430

@Phaedrux, I can confirm using it (1.26.1 RRF and DWC 2.07) on my Duet 0.6