Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    screen and bltouch problem with the 3.4.6 release

    Scheduled Pinned Locked Moved
    General Discussion
    3
    6
    230
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • anderundefined
      ander
      last edited by

      Hi there everyone!
      i have a duet2 board and i just uploaded the 3.4.6 firmware.
      After doing so, my screen doesn´t show any info, and i can´t access to the gcodes stored on it using the screen.
      The machine connects perfectly to the wifi and i can connect to the printer using the computer but definately the screen doesn´t work. i can´t even move any axys, and is not showing any temp info either.
      i also now have an issue with the bltouch after the upload of the firmware. if i send a job using the computer, the bltouch goes crazy deploying the probe, starts a non stop cicle, in and out while heating the extruder.
      i´m going to add my config.g
      thanks in advance.

      config(3).g

      fcwiltundefined 1 Reply Last reply Reply Quote 0
      • fcwiltundefined
        fcwilt @ander
        last edited by

        @ander

        If you copy-and-paste your code using the <> tags then everyone can see the code without having to download it.

        Also, what "screen" are you talking about?

        Frederick

        Printers: a small Utilmaker style, a small CoreXY and a E3D MS/TC setup. Various hotends. Using Duet 3 hardware running 3.4.6

        anderundefined 1 Reply Last reply Reply Quote 0
        • anderundefined
          ander @fcwilt
          last edited by

          Hi there @fcwilt
          the Screen is panel due7 touchscreen.
          And the code is:

          Configuration file for Duet WiFi (firmware version 3)
          ; executed by the firmware on start-up
          ;
          ; generated by RepRapFirmware Configuration Tool v2.1.8 on Fri Jan 31 2020 09:39:11 GMT+0100 (hora estándar de Europa central)

          ; General preferences
          G90 ; send absolute coordinates...
          M83 ; ...but relative extruder moves
          M550 P"Muxar 2.1" ; set printer name

          ; Network
          M552 S1 ; enable network
          M586 P0 S1 ; enable HTTP
          M586 P1 S0 ; disable FTP
          M586 P2 S0 ; disable Telnet

          ; Drives
          M569 P0 S1 ; physical drive 0 goes forwards
          M569 P1 S1 ; physical drive 1 goes forwards
          M569 P2 S1 ; physical drive 2 goes forwards
          M569 P3 S1 ; physical drive 3 goes forwards
          M584 X0 Y1 Z2 E3 ; set drive mapping
          M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation
          M92 X80.00 Y80.00 Z1600.00 E415.00 ; set steps per mm
          M566 X1200.00 Y1200.00 Z420.00 E1200.00 ; set maximum instantaneous speed changes (mm/min)
          M203 X30000.00 Y30000.00 Z480.00 E12000.00 ; set maximum speeds (mm/min)
          M201 X500.00 Y500.00 Z500.00 E2000.00 ; set accelerations (mm/s^2)
          M906 X800 Y1000 Z900 E800 I30 ; set motor currents (mA) and motor idle factor in per cent
          M84 S30 ; Set idle timeout

          ; Axis Limits
          M208 X0 Y10 Z0 S1 ; set axis minima
          M208 X320 Y340 Z360 S0 ; set axis maxima

          ; Endstops
          M574 X1 S1 P"!xstop" ; configure active-high endstop for low end on X via pin !xstop
          M574 Y1 S1 P"!ystop" ; configure active-high endstop for low end on Y via pin !ystop
          M574 Z2 S2 ; configure Z-probe endstop for high end on Z

          ; Z-Probe
          M950 S0 C"exp.heater3" ; create servo pin 0 for BLTouch
          M558 P9 C"zprobe.in+zprobe.mod" H4 F200 T6000 ; set Z probe type to bltouch and the dive height + speeds
          G31 P500 X15 Y25 Z1 ; set Z probe trigger value, offset and trigger height(CUANTO MAS NEGATIVO ESTE VALOR,MAS SE SEPARA EL EXTRUSOR)
          M557 X20:310 Y35:340 S96 ; define mesh grid

          ; Heaters
          M308 S0 P"bedtemp" Y"thermistor" T100000 B3950 ; configure sensor 0 as thermistor on pin bedtemp
          M950 H0 C"bedheat" T0 ; create bed heater output on bedheat and map it to sensor 0
          M143 H0 S120 ; set temperature limit for heater 0 to 120C
          M307 H0 R0.900 K0.388:0.000 D2.59 E1.35 S1.00 B0; enable bang-bang mode for the bed heater and set PWM limit
          M140 H0 ; map heated bed to heater 0
          M308 S1 P"e0temp" Y"thermistor" T100000 B4725 ; configure sensor 1 as thermistor on pin e0temp
          M950 H1 C"e0heat" T1 ; create nozzle heater output on e0heat and map it to sensor 1
          M143 H1 S280 ; set temperature limit for heater 1 to 280C
          M307 H1 R2.664 K0.489:0.000 D3.64 E1.35 S1.00 B0 V23.9 ; disable bang-bang mode for heater and set PWM limit

          ; Fans
          M950 F0 C"fan0" Q500 ; create fan 0 on pin fan0 and set its frequency
          M106 P0 S0 H-1 ; set fan 0 value. Thermostatic control is turned off
          M950 F1 C"fan1" Q500 ; create fan 1 on pin fan1 and set its frequency
          M106 P1 S1 H1 T45 ; set fan 1 value. Thermostatic control is turned on

          ; Tools
          M563 P0 D0 H1 F0 ; define tool 0
          G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets
          G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C

          ; Custom settings are not defined

          ; Miscellaneous
          M501 ; load saved parameters from non-volatile memory
          T0 ; select first tool

          droftartsundefined fcwiltundefined 2 Replies Last reply Reply Quote 0
          • droftartsundefined
            droftarts administrators @ander
            last edited by

            @ander add this to config.g:

            M575 P1 S1 B57600

            See https://docs.duet3d.com/en/User_manual/Connecting_hardware/Display_PanelDue#firmware-configuration

            Ian

            Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

            anderundefined 1 Reply Last reply Reply Quote 1
            • fcwiltundefined
              fcwilt @ander
              last edited by

              Hi @ander,

              Just for future reference this is what happens when you copy-and-past using the <> tags, which you can select from just above the text box.

              Frederick

              Configuration file for Duet WiFi (firmware version 3)
; executed by the firmware on start-up
;
; generated by RepRapFirmware Configuration Tool v2.1.8 on Fri Jan 31 2020 09:39:11 GMT+0100 (hora estándar de Europa central)

; General preferences
G90 ; send absolute coordinates...
M83 ; ...but relative extruder moves
M550 P"Muxar 2.1" ; set printer name

; Network
M552 S1 ; enable network
M586 P0 S1 ; enable HTTP
M586 P1 S0 ; disable FTP
M586 P2 S0 ; disable Telnet

; Drives
M569 P0 S1 ; physical drive 0 goes forwards
M569 P1 S1 ; physical drive 1 goes forwards
M569 P2 S1 ; physical drive 2 goes forwards
M569 P3 S1 ; physical drive 3 goes forwards
M584 X0 Y1 Z2 E3 ; set drive mapping
M350 X16 Y16 Z16 E16 I1 ; configure microstepping with interpolation
M92 X80.00 Y80.00 Z1600.00 E415.00 ; set steps per mm
M566 X1200.00 Y1200.00 Z420.00 E1200.00 ; set maximum instantaneous speed changes (mm/min)
M203 X30000.00 Y30000.00 Z480.00 E12000.00 ; set maximum speeds (mm/min)
M201 X500.00 Y500.00 Z500.00 E2000.00 ; set accelerations (mm/s^2)
M906 X800 Y1000 Z900 E800 I30 ; set motor currents (mA) and motor idle factor in per cent
M84 S30 ; Set idle timeout

; Axis Limits
M208 X0 Y10 Z0 S1 ; set axis minima
M208 X320 Y340 Z360 S0 ; set axis maxima

; Endstops
M574 X1 S1 P"!xstop" ; configure active-high endstop for low end on X via pin !xstop
M574 Y1 S1 P"!ystop" ; configure active-high endstop for low end on Y via pin !ystop
M574 Z2 S2 ; configure Z-probe endstop for high end on Z

; Z-Probe
M950 S0 C"exp.heater3" ; create servo pin 0 for BLTouch
M558 P9 C"zprobe.in+zprobe.mod" H4 F200 T6000 ; set Z probe type to bltouch and the dive height + speeds
G31 P500 X15 Y25 Z1 ; set Z probe trigger value, offset and trigger height(CUANTO MAS NEGATIVO ESTE VALOR,MAS SE SEPARA EL EXTRUSOR)
M557 X20:310 Y35:340 S96 ; define mesh grid

; Heaters
M308 S0 P"bedtemp" Y"thermistor" T100000 B3950 ; configure sensor 0 as thermistor on pin bedtemp
M950 H0 C"bedheat" T0 ; create bed heater output on bedheat and map it to sensor 0
M143 H0 S120 ; set temperature limit for heater 0 to 120C
M307 H0 R0.900 K0.388:0.000 D2.59 E1.35 S1.00 B0; enable bang-bang mode for the bed heater and set PWM limit
M140 H0 ; map heated bed to heater 0
M308 S1 P"e0temp" Y"thermistor" T100000 B4725 ; configure sensor 1 as thermistor on pin e0temp
M950 H1 C"e0heat" T1 ; create nozzle heater output on e0heat and map it to sensor 1
M143 H1 S280 ; set temperature limit for heater 1 to 280C
M307 H1 R2.664 K0.489:0.000 D3.64 E1.35 S1.00 B0 V23.9 ; disable bang-bang mode for heater and set PWM limit

; Fans
M950 F0 C"fan0" Q500 ; create fan 0 on pin fan0 and set its frequency
M106 P0 S0 H-1 ; set fan 0 value. Thermostatic control is turned off
M950 F1 C"fan1" Q500 ; create fan 1 on pin fan1 and set its frequency
M106 P1 S1 H1 T45 ; set fan 1 value. Thermostatic control is turned on

; Tools
M563 P0 D0 H1 F0 ; define tool 0
G10 P0 X0 Y0 Z0 ; set tool 0 axis offsets
G10 P0 R0 S0 ; set initial tool 0 active and standby temperatures to 0C

; Custom settings are not defined

; Miscellaneous
M501 ; load saved parameters from non-volatile memory
T0 ; select first tool

              Printers: a small Utilmaker style, a small CoreXY and a E3D MS/TC setup. Various hotends. Using Duet 3 hardware running 3.4.6

              1 Reply Last reply Reply Quote 0
              • anderundefined
                ander @droftarts
                last edited by

                Hi @droftarts
                It worked beautifly! thanks!
                The bltouch seems ok too....i don´t know if has to do something with the screen but hey, it´s working!

                1 Reply Last reply Reply Quote 0
                • First post
                  Last post
                Unless otherwise noted, all forum content is licensed under CC-BY-SA