Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    During Bed Probe G29

    Scheduled Pinned Locked Moved
    Tuning and tweaking
    4
    14
    431
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • airscapesundefined
      airscapes
      last edited by

      Increased the temp to 110 for an hour and ran another map
      Failed with all kinds of error

      25/2024, 10:16:37 PM Warning: Skipping grid point X=0.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=11.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=22.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=33.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=44.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=55.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=66.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=77.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=88.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=99.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=110.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=121.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=132.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=143.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=154.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=165.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=176.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=187.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=198.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=198.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=187.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=176.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=165.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=154.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=143.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=132.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=121.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=110.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=99.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=88.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=77.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=66.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=55.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=44.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=33.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=22.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=11.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=0.0, Y=246.0 because Z probe cannot reach it
      380 points probed, min error -0.225, max error 0.183, mean 0.004, deviation 0.082
      Height map saved to file 0:/sys/heightmap.csv
      Height map saved to file 0:/sys/110C-Fullbed-ABS-ASA.csv
      1/25/2024, 10:16:37 PM Warning: Skipping grid point X=0.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=11.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=22.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=33.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=44.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=55.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=66.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=77.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=88.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=99.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=110.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=121.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=132.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=143.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=154.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=165.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=176.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=187.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=198.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=198.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=187.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=176.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=165.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=154.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=143.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=132.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=121.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=110.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=99.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=88.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=77.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=66.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=55.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=44.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=33.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=22.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=11.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=0.0, Y=246.0 because Z probe cannot reach it
      380 points probed, min error -0.225, max error 0.183, mean 0.004, deviation 0.082
      Height map saved to file 0:/sys/heightmap.csv
      Height map saved to file 0:/sys/110C-Fullbed-ABS-ASA.csv
      1/25/2024, 10:16:36 PM M98 P"0:/macros/Re-Make-Map-110C-ABS-ASA"
      Warning: Skipping grid point X=0.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=11.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=22.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=33.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=44.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=55.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=66.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=77.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=88.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=99.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=110.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=121.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=132.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=143.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=154.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=165.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=176.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=187.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=198.0, Y=235.0 because Z probe cannot reach it
      Warning: Skipping grid point X=198.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=187.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=176.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=165.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=154.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=143.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=132.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=121.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=110.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=99.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=88.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=77.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=66.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=55.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=44.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=33.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=22.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=11.0, Y=246.0 because Z probe cannot reach it
      Warning: Skipping grid point X=0.0, Y=246.0 because Z probe cannot reach it
      380 points probed, min error -0.225, max error 0.183, mean 0.004, deviation 0.082
      Height map saved to file 0:/sys/heightmap.csv
      1/25/2024, 7:46:35 PM M98 P"0:/macros/Re-Make-100C-Fullbed-ABS-ASA"
      Warning: Skipping grid point X=199.0, Y=239.0 because Z probe cannot reach it
      Warning: Skipping grid point X=188.0, Y=239.0 because Z probe cannot reach it
      Warning: Skipping grid point X=177.0, Y=239.0 because Z probe cannot reach it
      Warning: Skipping grid point X=166.0, Y=239.0 because Z probe cannot reach it
      Warning: Skipping grid point X=155.0, Y=239.0 because Z probe cannot reach it
      Warning: Skipping grid point X=144.0, Y=239.0 because Z probe cannot reach it
      Warning: Skipping grid point X=133.0, Y=239.0 because Z probe cannot reach it
      Warning: Skipping grid point X=122.0, Y=239.0 because Z probe cannot reach it
      Warning: Skipping grid point X=111.0, Y=239.0 because Z probe cannot reach it
      Warning: Skipping grid point X=100.0, Y=239.0 because Z probe cannot reach it
      Warning: Skipping grid point X=89.0, Y=239.0 because Z probe cannot reach it
      Warning: Skipping grid point X=78.0, Y=239.0 because Z probe cannot reach it
      Warning: Skipping grid point X=67.0, Y=239.0 because Z probe cannot reach it
      Warning: Skipping grid point X=56.0, Y=239.0 because Z probe cannot reach it
      Warning: Skipping grid point X=45.0, Y=239.0 because Z probe cannot reach it
      Warning: Skipping grid point X=34.0, Y=239.0 because Z probe cannot reach it
      Warning: Skipping grid point X=23.0, Y=239.0 because Z probe cannot reach it
      Warning: Skipping grid point X=12.0, Y=239.0 because Z probe cannot reach it
      Warning: Skipping grid point X=1.0, Y=239.0 because Z probe cannot reach it
      Warning: Skipping grid point X=1.0, Y=250.0 because Z probe cannot reach it
      Warning: Skipping grid point X=12.0, Y=250.0 because Z probe cannot reach it
      Warning: Skipping grid point X=23.0, Y=250.0 because Z probe cannot reach it
      Warning: Skipping grid point X=34.0, Y=250.0 because Z probe cannot reach it
      Warning: Skipping grid point X=45.0, Y=250.0 because Z probe cannot reach it
      Warning: Skipping grid point X=56.0, Y=250.0 because Z probe cannot reach it
      Warning: Skipping grid point X=67.0, Y=250.0 because Z probe cannot reach it
      Warning: Skipping grid point X=78.0, Y=250.0 because Z probe cannot reach it
      Warning: Skipping grid point X=89.0, Y=250.0 because Z probe cannot reach it
      Warning: Skipping grid point X=100.0, Y=250.0 because Z probe cannot reach it
      Warning: Skipping grid point X=111.0, Y=250.0 because Z probe cannot reach it
      Warning: Skipping grid point X=122.0, Y=250.0 because Z probe cannot reach it
      Warning: Skipping grid point X=133.0, Y=250.0 because Z probe cannot reach it
      Warning: Skipping grid point X=144.0, Y=250.0 because Z probe cannot reach it
      Warning: Skipping grid point X=155.0, Y=250.0 because Z probe cannot reach it
      Warning: Skipping grid point X=166.0, Y=250.0 because Z probe cannot reach it
      Warning: Skipping grid point X=177.0, Y=250.0 because Z probe cannot reach it
      Warning: Skipping grid point X=188.0, Y=250.0 because Z probe cannot reach it
      Warning: Skipping grid point X=199.0, Y=250.0 because Z probe cannot reach it
      399 points probed, min error -0.218, max error 0.187, mean 0.013, deviation 0.079
      Height map saved to file 0:/sys/heightmap.csv
      Height map saved to file 0:/sys/100C-Fullbed-ABS-ASA.csv

      Phaedruxundefined 1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator @airscapes
        last edited by

        @airscapes said in During Bed Probe G29:

        because Z probe cannot reach it

        It didn't fail. It's just telling you that your mesh size has areas that aren't physically reachable by the probe. If you want to get rid of the errors, modify your M557 mesh xy positions to take the probe offset into account.

        Z-Bot CoreXY Build | Thingiverse Profile

        airscapesundefined 1 Reply Last reply Reply Quote 1
        • airscapesundefined
          airscapes @Phaedrux
          last edited by

          @Phaedrux seem odd, as I have never seen that in the past and the following is well within the build plate of 200x250
          Warning: Skipping grid point X=67.0, Y=239.0 because Z probe cannot reach it
          Warning: Skipping grid point X=56.0, Y=239.0 because Z probe cannot reach it

          How can the probe not reach them. Can this be a connection issue or mechanical adjustment in the probe?
          Going to run these again today with a cold bed will post results if different.
          Thanks,
          Doug

          jay_s_ukundefined 1 Reply Last reply Reply Quote 0
          • jay_s_ukundefined
            jay_s_uk @airscapes
            last edited by

            @airscapes your probe offset in Y is -21
            to probe at Y239, the nozzle needs to be Y260, which is outside your axis limits

            Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

            airscapesundefined 1 Reply Last reply Reply Quote 0
            • airscapesundefined
              airscapes @fcwilt
              last edited by

              @fcwilt Thanks, I will look up what I am changing as I do not recall what those do since it was set up over a year ago

              1 Reply Last reply Reply Quote 0
              • airscapesundefined
                airscapes @jay_s_uk
                last edited by airscapes

                @jay_s_uk Thanks, Yes, I just positioned the machine to one of those points and I now I get it! 🙂 I will update my macros to only include what the probe can reach, or at least make a note to myself to ignore those next time..

                1 Reply Last reply Reply Quote 1
                • airscapesundefined
                  airscapes @fcwilt
                  last edited by

                  @fcwilt said in During Bed Probe G29:

                  @airscapes said in During Bed Probe G29:

                  This probe has been in place for a year I have made other maps and tend to reuse them. This has happened with the failure before complete one other time.

                  M558 P9 C"^zprobe.in" H3 F100 T6000 A3 R1.25 S0.01 B0.
                  G31 X0 Y-21 Z1.57 P25 ;

                  In M558:

                  Change the S0.01 to S0.03

                  Change the R1.25 to R0

                  In G31:

                  Change the P25 to P500

                  Let us know if those changes help.

                  Frederick

                  Can you explain the P25 to P500? I probably found P25 for BLTouch in this forum or in an example. What is it actually doing, the dictionary just says trigger value and does not elaborate?
                  Here is one such post
                  PhaedruxPhaedrux MODERATOR 22 Aug 2023, 16:51
                  You really only need to care about the P value when using an analog probe. Just set it as P25 for the BLtouch.

                  fcwiltundefined 1 Reply Last reply Reply Quote 0
                  • fcwiltundefined
                    fcwilt @airscapes
                    last edited by

                    @airscapes said in During Bed Probe G29:

                    Can you explain the P25 to P500?

                    When triggered my BLTouch probes read 1000. When not triggered they read 0. The setting of P500 is midway between 0 and 1000.

                    It has always worked for me.

                    Frederick

                    Printers: a E3D MS/TC setup and a RatRig Hybrid. Using Duet 3 hardware running 3.4.6

                    airscapesundefined 1 Reply Last reply Reply Quote 0
                    • airscapesundefined
                      airscapes @fcwilt
                      last edited by

                      @fcwilt said in During Bed Probe G29:

                      @airscapes said in During Bed Probe G29:

                      Can you explain the P25 to P500?

                      When triggered my BLTouch probes read 1000. When not triggered they read 0. The setting of P500 is midway between 0 and 1000.

                      It has always worked for me.

                      Frederick

                      Interesting, still reads 1000 and 0.. not but not every time it reads a point. I did run a full bed at 100C with no failure to read. Running 110C now. Thanks!

                      1 Reply Last reply Reply Quote 0
                      • Phaedruxundefined
                        Phaedrux Moderator
                        last edited by

                        The trigger time on a BLtouch is very short and then resets. The DWC display might not always refresh at the right time to catch it.

                        Z-Bot CoreXY Build | Thingiverse Profile

                        1 Reply Last reply Reply Quote 1
                        • First post
                          Last post
                        Unless otherwise noted, all forum content is licensed under CC-BY-SA