Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Voron 2.4 - Toolboard 1LC (V1.3) Mount

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    3
    6
    269
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • c_ernundefined
      c_ern
      last edited by

      Hello,
      I'm building my Voron 2.4 with a Duet 3 Mainboard HC and a Toolboard 1LC V1.3 because I like having just 4 wires connected from the toolhead to the mainboard.
      But actually it's quite hard to find a mount for a toolboard to a Stealthburner / Clockwork2 Extruder anywhere on the internet. I remember seeing some pictures on this forum in the past, but i don't find it anymore.
      Could anyone provide me with files for mounting the Toolboard 1LC (preferably V1.3, but any version would do as long as it's in a file format like STEP which I could alter. I would also provide the edited files if so possible and wished for)?
      Thank you and kind regards
      Chris

      T3P3Tonyundefined 1 Reply Last reply Reply Quote 0
      • T3P3Tonyundefined
        T3P3Tony administrators @c_ern
        last edited by

        @c_ern the ones i have seen are here:
        https://www.teamfdm.com/files/file/732-stealthburner-cw1-cw2-for-duet-lc1-toolboards/
        but they are only to v1.2 and do not have CAD with them AFAIR, maybe at least they are inspiration to make a 1.3 version.

        www.duet3d.com

        c_ernundefined 1 Reply Last reply Reply Quote 0
        • c_ernundefined
          c_ern @T3P3Tony
          last edited by

          @T3P3Tony Thank you. Yeah, that's what i've found so far as well. I wrote to the user who uploaded this, maybe he will respond. Otherwise will try to remodel this.
          Another model I found was this one:
          https://www.printables.com/model/710408-duet-1lc-toolboard-rev-11-voron-steathburner-mount
          It's for V1.1, but it would be a lot easier to remodel to V1.3.
          Is there any benefit on where to put the TB aside from looks?
          Should I prefer one over the other?

          T3P3Tonyundefined droftartsundefined 2 Replies Last reply Reply Quote 0
          • T3P3Tonyundefined
            T3P3Tony administrators @c_ern
            last edited by

            @c_ern no particular benefit other the location of the connecters versus the power in and various connectors out.

            www.duet3d.com

            1 Reply Last reply Reply Quote 0
            • droftartsundefined
              droftarts administrators @c_ern
              last edited by

              @c_ern Even if you print the 1LC 1.1 or 1.2 mount, it should work for the 1.3, just be held on by two screws rather than four, as only two of the four screw hole locations changed between the versions. Other toolboards, eg RRF-36 and Roto, seem to get by with only two screws!

              Ian

              Bed-slinger - Mini5+ WiFi/1LC | RRP Fisher v1 - D2 WiFi | Polargraph - D2 WiFi | TronXY X5S - 6HC/Roto | CNC router - 6HC | Tractus3D T1250 - D2 Eth

              c_ernundefined 1 Reply Last reply Reply Quote 0
              • c_ernundefined
                c_ern @droftarts
                last edited by

                @droftarts Thank you both!
                I ended up remodeling the Printables Parts as I also needed a different cable chain mount and it was easier to remodel than the other one. Now I'm going to figure out the specialities of the toolboard...

                1 Reply Last reply Reply Quote 0
                • c_ernundefined c_ern referenced this topic
                • First post
                  Last post
                Unless otherwise noted, all forum content is licensed under CC-BY-SA