Duet Wifi
-
Hi,
I opened my old 3D printer (6 years without touching it...) now procotole for wifi is mainly in 5G (FabLab, house) do you have solution to solve the connexion problem ?
the IP adress is not found and I can't access to the Duet Web Control.
Thank for your help -
@pir2z the duet wifi boards, (both duet 2 and duet 3) are 2.4GHz only
Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is
-
@pir2z Most routers are able to broadcast on a 2.4GHz channel as well as 5GHz.
Ian
-
@jay_s_uk
Hi Jay thank for confirmation. So what solution ? change the wifi router ? instal a screen panel ? -
@pir2z as @droftarts most wifi routers can broadcast both 2.4GHz and 5GHz. If yours can't then I would consider installing an access point
-
last ditch solution would be to run the duet in AP mode.
-
@pir2z As @oliof suggests, you can run the Duet in Access Point mode. See https://docs.duet3d.com/en/User_manual/Machine_configuration/Networking#configuring-duet-in-wifi-access-point-mode
Ian
