Octopus Pro F429 with wifi module, does it run RRF?
-
Hello everyone.
I bought this Octopus Pro F429 with a Wi-Fi module esp32.
Could you tell me if RRF runs on this board?I haven't learned anything about this RRF variant yet, even though I've been using Duet boards since 2019. I have a Corexy with an Octopus board running Klipper, and I want to replace it with this one with RRF and stop using Klipper.
-
@RodrigoRMaraujo should work
-
@RodrigoRMaraujo It looks like it has a STM32F429ZGT6 mcu, in which case yes RRF should run on it. See: https://teamgloomy.github.io/btt_octopus_pro_1.0_f429_general_3_5.html
Before going too far you might also want to spend some time reading some of the background notes on the stm32 port https://teamgloomy.github.io/index.html
-
@gloomyandy thank you.
I will read everything! -
@gloomyandy
I managed to install and update to version 3.5.4.
I'm confused whether I need to update the wifi firmware or should I keep it as it is working. Can you clarify this doubt for me?
Thank you.
-
@RodrigoRMaraujo best to update it
-
@jay_s_uk
Thank you!
