Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    RRF to Duet3 6HC

    Scheduled Pinned Locked Moved Unsolved
    General Discussion
    3
    8
    231
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • agz90undefined
      agz90
      last edited by

      Problem installation firmware to Duet3 6HC v 1.02

      agz90undefined 1 Reply Last reply Reply Quote 0
      • agz90undefined
        agz90 @agz90
        last edited by

        @agz90 said in RRF to Duet3 6HC:

        Hello, I have a problem installing the rap rap on the board. I load the latest rap rap with Bossa, it saves it, but when I check it, it gives me an error and the board doesn't start.

        1 Reply Last reply Reply Quote 0
        • Phaedruxundefined
          Phaedrux Moderator
          last edited by

          How are you checking it?
          What error does it report?
          Are you following these steps to flash the firmware?
          https://docs.duet3d.com/en/User_manual/RepRapFirmware/Updating_firmware#all-other-duet-boards

          Z-Bot CoreXY Build | Thingiverse Profile

          agz90undefined 1 Reply Last reply Reply Quote 0
          • agz90undefined
            agz90 @Phaedrux
            last edited by

            @Phaedrux said in RRF to Duet3 6HC:

            How are you checking it?
            What error does it report?
            Are you following these steps to flash the firmware?

            Yes, I followed all the steps exactly as described. Checked with Bossa verify. My problem is that I thought I could install Clipper on the board, apparently I deleted the boot file and now it doesn't work. I don't know how to restore the rep rap on the board.

            agz90undefined 1 Reply Last reply Reply Quote 0
            • agz90undefined
              agz90 @agz90
              last edited by

              @agz90 ![alt text](изображение_2025-03-07_000643135.png image url)

              agz90undefined 1 Reply Last reply Reply Quote 0
              • agz90undefined
                agz90 @agz90
                last edited by

                @agz90 install firmware 3.6.0 Release Candidate 1

                dc42undefined 1 Reply Last reply Reply Quote 0
                • Phaedruxundefined
                  Phaedrux Moderator
                  last edited by

                  Make sure your bossa check boxes match this

                  07b46c4c-3241-4b35-9549-7a0cc130dab9-image.png

                  Try this bin file for 3.5.4

                  https://github.com/Duet3D/RepRapFirmware/releases/download/3.5.4/Duet3Firmware_MB6HC.bin

                  Z-Bot CoreXY Build | Thingiverse Profile

                  1 Reply Last reply Reply Quote 0
                  • dc42undefined
                    dc42 administrators @agz90
                    last edited by

                    @agz90 also make sure that you remove the Erase jumper before you command Bossa to flash the firmware.

                    Duet WiFi hardware designer and firmware engineer
                    Please do not ask me for Duet support via PM or email, use the forum
                    http://www.escher3d.com, https://miscsolutions.wordpress.com

                    1 Reply Last reply Reply Quote 0
                    • First post
                      Last post
                    Unless otherwise noted, all forum content is licensed under CC-BY-SA