Configurazione bl touch antclabs

droftarts

@perfetto said in Configurazione bl touch antclabs:

Good morning, when I try to load the firmware 2.02.1 or 3.4.4 by loading from web control at the moment it asks me do you want to install it when I give the confirmation an error appears

Error: In-app programming binary "Duet2CombinedIAP.bin" not found in (m997 s0)

The IAP file is the 'In App Programmer'; it is the program that updates the firmware, and needs to be accessible on the SD card. See https://docs.duet3d.com/User_manual/RepRapFirmware/Updating_firmware#required-files

Please send M122 and post the response, so I can see what firmware version you are currently running. If you can access DWC, please also look in the 'Settings > General' menu option, and post what version of DWC you are running.

I guess you are using RRF 3.0 or 3.1. The "Duet2CombinedIAP.bin" is specific to these versions. Download it from https://github.com/Duet3D/RepRapFirmware/releases/tag/3.0 and put it in the /sys folder on the SD card.

With all firmware versions up to RRF v3.2.2, all firmware update files (including the IAP file) are stored in the ‘0:/sys/’ directory.
From RRF v3.3, to avoid too many files in this folder, all firmware update files are stored in ‘0:/firmware/’ directory.

Ian

perfetto

DWC 2.0.4

m122.txt

perfetto

FIRMWARE 3.0

droftarts

@perfetto said in Configurazione bl touch antclabs:

DWC 2.0.4
FIRMWARE 3.0

Okay, that's fine. You need to upload "Duet2CombinedIAP.bin" from https://github.com/Duet3D/RepRapFirmware/releases/tag/3.0 to the /sys folder on the SD card.

I suggest you update to 3.5.4, and we'll fix the configuration there. Download "Duet2and3Firmware-3.5.4.zip" from https://github.com/Duet3D/RepRapFirmware/releases/tag/3.5.4 and upload the whole zip file (don't unzip it) to the Duet in DWC.

Then send M122 again, to check it is updated.

Ian

perfetto

Ho caricato il file IAP nella cartella sys siè ricaricato il firmware 2.05.1 nei file di configurazione escono codici incomprensibili allego m122
m 122 -.txt

in seguito al tuo consiglio ho lanciato il firmware 3.5.4 adesso non si collega al web control dice versione incompatibile

droftarts

@perfetto said in Configurazione bl touch antclabs:

I uploaded the IAP file in the sys folder, the firmware 2.05.1 was reloaded, incomprehensible codes come out in the configuration files, I attach m122

"incomprehensible codes come out in the configuration files"? Please give me an example.

following your advice I launched the firmware 3.5.4, now it does not connect to the web control, it says incompatible version

When you upgrade, you MUST go from 2.05.1 to 3.0 first. You can go from 3.0 to 3.5.4. But you cannot go from 2.05.1 to 3.5.4. I assumed you were on 3.0, and would update to 3.5.4.

Most likely, the firmware is still 2.05.1, but DWC is 3.5.4. So you need to go back to DWC 2.0.4. Download "DuetWebControl-SD-2.04.zip" from https://github.com/Duet3D/RepRapFirmware/releases/tag/3.0 and unzip. Replace the contents of the www folder on the SD card with the files and folders from the zip.

I suggest you pick a firmware version, either 2.05.1 or 3.5.4, and stick to it. I recommend 3.5.4. We can fix configuration errors.

Ian

perfetto

@droftarts Ho ricominciato da zero:
caricato la prima configurazione funzionante del 2020
sono passato al firmware 2.05.1 poi alla 3.0 poi alla 3.5.4

attualmente in web control, impostazioni generali mi ritrovo:
Duet 2 2Ethernet versione 3.5.4
Duet Web Control DWC 3.5.4

allego m122 e config.g

m122.txt

config.g.txt

Spero di aver fatto bene

Grazie

droftarts

@perfetto said in Configurazione bl touch antclabs:

I started from scratch:
loaded the first working configuration of 2020
I switched to firmware 2.05.1 then to 3.0 then to 3.5.4

currently in web control, general settings I find myself:
Duet 2 2Ethernet version 3.5.4
Duet Web Control DWC 3.5.4

Okay, great! Currently, your configuration is for firmware 2.05.1. We need to update this for v3.x.

From your post here https://forum.duet3d.com/post/354792, you had a configuration for 3.5.1 (versione 3.5.1.txt). This is close to the configuration you need. If you have the configtool.json file for this (created by the configuration tool), can you upload it please? I can adjust it for you to match your original RRF v2.x configuration.

Ian

perfetto

credo sia questo, ormi ho un milione di cartelle di prova ma questo è il primo

configtool.json

grazie

perfetto

allego anche questo che fa parte della stessa conficonfig --.txt gurazione

droftarts

@perfetto said in Configurazione bl touch antclabs:

I think this is it, now I have a million test folders but this is the first
I also attach this which is part of the same configuration config.txt

This configuration is a little different, but no problem, I'll check it through. I've run out of time today, so will do this tomorrow morning.

Ian

perfetto

@droftarts grazie solo una cosa la home deve essere x0 y-5
ancora tanti grazie