Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Dual printing with no purge bucket, no prime tower and no ooze shield

    Scheduled Pinned Locked Moved
    Example setups and prints
    7
    11
    2.5k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • parovoZZundefined
      parovoZZ
      last edited by

      Originally!

      1 Reply Last reply Reply Quote 0
      • biscuitladundefined
        biscuitlad
        last edited by

        It's an extraordinary design, congratulations on getting it to work! So you don't need to do any purge at all? I'm guessing you retract a little, otherwise your filament starts to brown in the nozzle while it waits, so I'm surprised you don't have to purge something just in order to get an even pressure flow on the restart?

        1 Reply Last reply Reply Quote 0
        • robmundefined
          robm
          last edited by

          Very nice!

          1 Reply Last reply Reply Quote 0
          • T3P3Tonyundefined
            T3P3Tony administrators
            last edited by

            Very nice! How much are you cooling the inactive hotend?

            www.duet3d.com

            1 Reply Last reply Reply Quote 0
            • stephencundefined
              stephenc
              last edited by

              With 160C standby you don't need to purge anything. And browning will actually be an issue only if you standby too long such as second toolhead only start printing halfway up the print. In that case lower the standby temp to 95C

              I also have a metal shim that will block the tip of the nozzle when parked. So this has been good enough to maintain the pressure.

              The inactive hotend will always be above 45c in both scenario so the fan blowing the heatsink is always on for the duration of print

              Thanks
              Stephen

              Stephen
              https://github.com/stephenci/ZideX

              1 Reply Last reply Reply Quote 0
              • stephencundefined
                stephenc
                last edited by

                another example finish

                Stephen
                https://github.com/stephenci/ZideX

                1 Reply Last reply Reply Quote 0
                • Dakineundefined
                  Dakine
                  last edited by

                  This is ridiculously awesome. Thanks for sharing.

                  Maker Select v2 : Duet Wifi : Panel Due 7i

                  1 Reply Last reply Reply Quote 0
                  • claustroundefined
                    claustro
                    last edited by

                    check this out
                    https://www.youtube.com/watch?v=l5G2fkn8_oQ

                    1 Reply Last reply Reply Quote 0
                    • T3P3Tonyundefined
                      T3P3Tony administrators
                      last edited by

                      @claustro:

                      check this out
                      https://www.youtube.com/watch?v=l5G2fkn8_oQ

                      Cool, yours?

                      www.duet3d.com

                      1 Reply Last reply Reply Quote 0
                      • claustroundefined
                        claustro
                        last edited by

                        Nope .
                        this is the origianl Italian thread created by Fabrizo ( eagle 26).
                        he is available for sharing all his work.
                        http://forums.reprap.org/read.php?362,768409,789866#msg-789866

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post
                        Unless otherwise noted, all forum content is licensed under CC-BY-SA