My duetwifi seems to have died :(

gzcwnk · 10 Mar 2018, 05:23

In prontoface when I hit an axis the steppers hum a bit but nothing moves.

I can see 24v on the PSU LED.

gzcwnk · 10 Mar 2018, 05:24

Step bed temp, temp rises OK.

gzcwnk · 10 Mar 2018, 05:26

M115
SENDING:M115
FIRMWARE_NAME: RepRapFirmware for Duet WiFi FIRMWARE_VERSION: 1.16 ELECTRONICS: Duet WiFi 1.0 FIRMWARE_DATE: 2016-11-08

M115
SENDING:M115
FIRMWARE_NAME: RepRapFirmware for Duet WiFi FIRMWARE_VERSION: 1.16 ELECTRONICS: Duet WiFi 1.0 FIRMWARE_DATE: 2016-11-08

So its "alive" I suppose

gzcwnk · 10 Mar 2018, 05:41

So updating firmware I get,

M997 S0
Error: In-application programming binary "iap4e.bin" not found
[ERROR] Error: In-application programming binary "iap4e.bin" not found

gzcwnk · 10 Mar 2018, 05:53

Ok found that….installed it to /sys.

SENDING:M997 S1
Trying to connect at 230400 baud:
success
Erasing 4096 bytes...
Erasing 233472 bytes...
Uploading file...
5% complete
10% complete
15% complete
20% complete
25% complete
30% complete
35% complete
40% complete
45% complete
50% complete
55% complete
60% complete
65% complete
70% complete
75% complete
80% complete
85% complete
90% complete
95% complete
Upload successful

Phaedrux · 10 Mar 2018, 05:56

Before trying to update the firmware on maybe not working hardware try disabling and reenabling the wifi module.

M552 S0
M552 S1

What does m552 return in pronterface?

Phaedrux · 10 Mar 2018, 05:57

Well at least it was successful?

gzcwnk · 10 Mar 2018, 06:05

m115
SENDING:M115
FIRMWARE_NAME: RepRapFirmware for Duet WiFi FIRMWARE_VERSION: 1.20 ELECTRONICS: Duet WiFi 1.0 FIRMWARE_DATE: 2017-12-23

M587 S"24G" P"mypassword" never returns. Nothing on wifi router.

Trying to set up the wifi and no workie

Phaedrux · 10 Mar 2018, 06:09

There are pretty specific steps for upgrading to 1.20 from an older firmware. It's a bit of a change from previous updates. Did you follow those steps?

gzcwnk · 10 Mar 2018, 06:11

Ok when I send the above it switches my password to uppercase by the look of it. M552 S1 says wrong password

Phaedrux · 3 Oct 2018, 06:12

https://duet3d.dozuki.com/Wiki/Firmware_Overview#Section_Installing_and_Updating_Firmware

https://duet3d.dozuki.com/Wiki/Installing_and_Updating_Firmware#Section_Upgrading_to_DuetWiFiFirmware_1_Num_19

gzcwnk · 10 Mar 2018, 06:16

as far as I know.

gzcwnk · 10 Mar 2018, 06:21

Ok so this is a 3rd set of instructions!

gzcwnk · 10 Mar 2018, 06:33

OK so its all upper case so I need to find something else to send commands with

gzcwnk · 10 Mar 2018, 07:21

M98 P/macros/SetNetwork
Warning: Macro file /macros/SetNetwork not found.<lf>ok<lf>Warning: Macro file /macros/SetNetwork not found.<lf>ok <lf>hmmm something wrong here…</lf></lf></lf></lf>

gzcwnk · 10 Mar 2018, 07:27

M552 S1
ok<lf>WiFi module started <lf>M587
Remembered networks:<lf>24G IP=0.0.0.0 GW=0.0.0.0 NM=0.0.0.0<lf>24G_IOT IP=0.0.0.0 GW=0.0.0.0 NM=0.0.0.0<lf>ok<lf>WiFi reported error: Wrong password while trying to connect to 24G<lf>Wifi module is idle <lf>?

It can see 24G so wifi hardware must be OK?

I know the password is correct.</lf></lf></lf></lf></lf></lf></lf></lf>

gzcwnk · 10 Mar 2018, 07:42

M587 S"G24" P"xxxxxxx"
M587: Failed to add SSID to remembered list<lf>ok <lf>?</lf></lf>

gzcwnk · 10 Mar 2018, 08:18

OK I am failing to get an IP address.

gzcwnk · 10 Mar 2018, 08:19

(COM7) Remembered networks:<lf>24G IP=0.0.0.0 GW=0.0.0.0 NM=0.0.0.0<lf>24G_IOT IP=0.0.0.0 GW=0.0.0.0 NM=0.0.0.0<lf>G24 IP=0.0.0.0 GW=0.0.0.0 NM=0.0.0.0<lf>ok<lf>WiFi reported error: Wrong password while trying to connect to 24G<lf>Wifi module is idle</lf></lf></lf></lf></lf></lf>

gzcwnk · 10 Mar 2018, 08:31

OK I tried a new network,

(COM7) M587 S"G24_IoT" P"stevenjones"
(COM7) ok <lf>(COM7) M552 S1
(COM7) ok<lf>WiFi reported error: Wrong password while trying to connect to 24G<lf>Wifi module is idle <lf>I cant see it being a wrong password!</lf></lf></lf></lf>