Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Is there any way to change drivers (TMC2660) to the common A4988?

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    13
    21
    3.9k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Electraundefined
      Electra @dc42
      last edited by Electra

      @dc42
      I bought A4988 from AliExpress and is much much cheaper than TMC2660

      • 10 pcs cost £7 incl delivery (£0.7 each incl delivery)
      • 30 pcs cost £16.8 ( £0.56 each) + delivery cost (£3) for 30 pcs

      The TMC2660 cost
      -10 pcs £45 ( £4.5 each) from Digikey

      But, of course the TMC2660 are much better than A4988.....

      dc42undefined 1 Reply Last reply Reply Quote 0
      • ShadowXundefined
        ShadowX
        last edited by ShadowX

        @Pao de Forma,

        Stop being an idiot and you won't have to replace it with an inferior driver chip. If you have enough skills to solder and replace the TMC2660 chip with a A4988 driver and update the firmware yourself, you won't even have to ask the question in this forum. Stop wasting DC42's time and let him work.

        If you really want a challenge, replace the core i9 extreme CPU on an Intel board with an 8088 CPU. It will keep you busy.

        1 Reply Last reply Reply Quote 2
        • Danalundefined
          Danal
          last edited by

          If I had the power to lock, or better yet entirely delete, this thread, I would.

          Pao, STOP WASTING EVERYBODY'S TIME. The idea you are pursuing is as "off topic" to the philosophy of the Duet series of boards as it is possible to get. They are high end boards, and high capability. The idea of DOWNGRADING part of the board, to save less than £4, in a circumstance that is very unlikely to happen to begin with... that idea is directly opposite where the company, and the customers of the company, want to go.

          Please, go purchase a rock bottom priced board and get on THEIR forums. Leave us alone.

          Go away.

          Delta / Kossel printer fanatic

          1 Reply Last reply Reply Quote 1
          • A Former User?
            A Former User
            last edited by

            And this children is why birth control was invented.

            1 Reply Last reply Reply Quote 1
            • dc42undefined
              dc42 administrators @Electra
              last edited by dc42

              @electra said in Is there any way to change drivers (TMC2660) to the common A4988?:

              @dc42
              I bought A4988 from AliExpress and is much much cheaper than TMC2660

              • 10 pcs cost £7 incl delivery (£0.7 each incl delivery)
              • 30 pcs cost £16.8 ( £0.56 each) + delivery cost (£3) for 30 pcs

              The TMC2660 cost
              -10 pcs £45 ( £4.5 each) from Digikey

              But, of course the TMC2660 are much better than A4988.....

              Quite so. People buy the Duet WiFi because they are looking for something better than Arduino Mega+RAMPS+A4988.

              Btw it's possible to connect A4988 or other drivers to the expansion bus. This is covered in the wiki page about connecting external drivers.

              Duet WiFi hardware designer and firmware engineer
              Please do not ask me for Duet support via PM or email, use the forum
              http://www.escher3d.com, https://miscsolutions.wordpress.com

              Danalundefined 1 Reply Last reply Reply Quote 1
              • Danalundefined
                Danal @dc42
                last edited by

                @dc42 said

                Quite so. People buy the Duet WiFi because they are looking for something better than Arduino Mega+RAMPS+A4988.

                Exactly!

                Delta / Kossel printer fanatic

                1 Reply Last reply Reply Quote 1
                • deckingmanundefined
                  deckingman
                  last edited by deckingman

                  Although I agree with the sentiment, I'm curious as to why people are now giving "Pao" such a hard time. His last post was 19th May 2017. Why resurrect a year old thread to tell someone to go away when he in fact went away a year ago?

                  Ian
                  https://somei3deas.wordpress.com/
                  https://www.youtube.com/@deckingman

                  A Former User? 1 Reply Last reply Reply Quote 0
                  • A Former User?
                    A Former User @deckingman
                    last edited by

                    @deckingman said in Is there any way to change drivers (TMC2660) to the common A4988?:

                    Although I agree with the sentiment, I'm curious as to why people are now giving "Pao" such a hard time. His last post was 19th May 2017. Why resurrect a year old thread to tell someone to go away when he in fact went away a year ago?

                    looks like the thread was resurrected by elektra, and it kind of ran away from there..... all sentiments still stand a year later.

                    1 Reply Last reply Reply Quote 0
                    • Danalundefined
                      Danal
                      last edited by

                      As mentioned, were I a moderator, this would be a "Delete".

                      So that it can't pull itself out of the grave, again...

                      Delta / Kossel printer fanatic

                      1 Reply Last reply Reply Quote 0
                      • Dougal1957undefined
                        Dougal1957
                        last edited by

                        Maybe not delete but certainly lock so that no further comments can be made

                        1 Reply Last reply Reply Quote 0
                        • timcurtis67undefined
                          timcurtis67
                          last edited by

                          By commenting on how to handle this old post you are actually keeping it alive. Oh shoot, I just did the same thing ☺

                          1 Reply Last reply Reply Quote 0
                          • First post
                            Last post
                          Unless otherwise noted, all forum content is licensed under CC-BY-SA