Using heater cartridges to heat stage
-
Thanks for the info. My bed is basically that size, how'd you know?
I'm using a recent Duet 2, with 24V power supply like you said. The bed is 3mm aluminum, so I think the heating will be closer to uniform. Glass or some other sheet will be placed on top to print on.
Will 5A be too much for the mosfet or traces? What if I wanted 10A?
-
According to: https://duet3d.dozuki.com/Wiki/Hardware_Overview
"High Power rating: Each stepper driver is capable of 2.8A motor current, currently limited in software to 2.4A. The bed heater channel is specifically designed for high current (18A)"The 0.4-0.5W/cm^2 rule of thumb is based on using a heater pad, not cartridges. Heater cartridges are cylindrical, which means very small contact area between the cartridge and a flat plate, which means inefficient heat transfer, which means the cartridge temperature will be quite a bit higher than the plate temperature, or put another way, bed temperature will be quite a bit lower than the cartridge temperature. How will you attach the cartridges to the bed plate in a way that will improve heat transfer, and not be affected by elevated temperatures?
-
May I ask, why would you want to do such a thing? Not to dissuade you. Just curious.
-
This post is deleted! -
Physically possible per current capacity of Duet. Operationally inadvisable, for numerous reasons, including hotspots. Plenty of excellent alternatives: https://www.google.com/search?q=150+mm+heated+bed Some of them at price points well below three 24V heater cartridges.
Detailed example Under US $10, shipped, 24V 200x200
-
@danal Thanks for the links. Unfortunately, my bed is not a nice square shape like that. But maybe I will consider reshaping the bed so I can use an off the shelf heating PCB for more uniform heating.
-
What shape is the bed?
-
@dc42 The bed is rectangle shaped. 140 x 100 approx.
-
There are at least two companies (Shenzen Ali Brother Technologies, and Keenovo) who will make a silicone heater to your own size, voltage and power specifications. They don't charge very much for this.
-
@dc42 Oh great, I'll check them out, thanks! Could be useful for other projects as well!
