X and Y motors not moving

samlogan87

Sorry I typed M584 and got

M584
Driver assignments: X0 Y1 Z2:3:4 U3 V4 E5, 5 axes visible

I tried changing the steps per mm to 800 and it just sits there and hums

Phaedrux

If you replace your m584 command in config.g with just M584 X0 Y1 and nothing else do they work then?

samlogan87

Tried that and still nothing. Sounds like it wants to move but it doesn't do anything unfortunately

Phaedrux

Can you send M906 and verify that the motor currents are being accepted?

samlogan87

Sure can.

Here they are

M906
Motor current (mA) - X:850, Y:850, Z:1850, U:1850, V:1850, E:800, idle factor 50%

Phaedrux

This is why

; Automatic power saving

M911 S10 R11 P"
M913 X0 Y0

M913 is dropping current to 0%

samlogan87

You are an absolute genius. It works.

Thank you so much. I really love this forum

Phaedrux

Aww shucks.

Now maybe I can sleep because that was bugging me.

whosrdaddy

Nice catch!
This one was bugging me too

samlogan87

Yeah I have no idea why that line was in there. I copied the restart on power fail from somewhere and it must have been in there. Oh well I am really happy you guys have sorted it for me. I was starting to get a bit deflated.

dc42

@samlogan87 said in X and Y motors not moving:

Yeah I have no idea why that line was in there. I copied the restart on power fail from somewhere and it must have been in there. Oh well I am really happy you guys have sorted it for me. I was starting to get a bit deflated.

The M913 X0 Y0 command should have been within the quoted string on the previous line.