Bipolar 8 wires paralle or Series Duet WIFI?
-
Hi, for the connection in bipolar mode 8 wires the connection must you be in paralle with a Duet WIFI?
Thanks
Chris
-
To be clear, you’re taking about an 8-wire bipolar stepper motor, right?
-
@rcarlyle said in Bipolar 8 wires paralle or Series Duet WIFI?:
o be clear, you’re taking about an 8-wire bipolar stepper motor, right?
Yes! I use a stepper motor that is 8 wire, so I want to know if I should connect them in series or parallel
-
For a 3d printer, parallel will let the motor run much faster. But you will need twice as much drive current. Do you have motor specs or datasheet?
-
@rcarlyle said in Bipolar 8 wires paralle or Series Duet WIFI?:
For a 3d printer, parallel will let the motor run much faster. But you will need twice as much drive current. Do you have motor specs or datasheet?
-
Use the series configuration. The rated current for that motor in the parallel configuration is 6A, which is too high for the stepper drivers on the Duet.
-
Oof, yeah, use series. That parallel winding is way outside what a small chopping driver can do. Even aside from the 6A rated current, I think you’d have problems with the extremely low inductance/resistance screwing up microstepping.
-
Ok!
Thanks dc42 and RCarlyle
Chris