Batch 4&5 ready to ship early (and Batch 4 is sold out!)
-
Tony,
I ordered mine from batch 4 (O/N 204) but haven't received that email.
Ian
-
For some reason the email didn't show up in my inbox. I use gmail. I did a search for it and sure enough it was there. It's wierd that I moved it to the inbox folder and I still can't see it unless I search for it. It could just be a 6am looking it up on a cell phone thing. I'm order 286 batch 4.
-
Odd I did send it to both of you. None the less if you are happy with getting it early then no action required, if you want a delay because you are away or something then let is know.
Cheers
Tony
P.S. This email was mainly prompted because we noticed some people.ordering batch 4/5 when 3 had not yet sold out.
-
Must be a gmail thing. The last email I had was the one on 3rd August informing of the delay. Nothing since. No worries though, happy to get it sooner.
Ian -
Tony,
For info, I had an email from service@paypal to say that Think3dPrint3d had added delivery information. Delivery status marks as sent via Royal Mail. - looking forward to receiving it.
Ian
-
Hi Ian
Excellent, at least PayPal emails are working properly.
I have your single channel expansion prototype on my to-do list for this weekend, the level shifting board has arrived.
Cheers
Tony
-
Hi Ian
Excellent, at least PayPal emails are working properly.
I have your single channel expansion prototype on my to-do list for this weekend, the level shifting board has arrived.
Cheers
Tony
Bear in mind that the mechanism for the firmware to know whether drivers beyond the first 5 are TMC2660s or simple step/dir/enable drivers is not implemented yet, pending finalisation of the design of the expansion boards. Currently it assumes that all drivers are TMC2660.
-
Haven't gotten any emails, but very happy to be getting the board early (batch 4 order #325). Thank you for the hard work getting these out the door.
-
Part of batch 4 USA orders is out the door, the second half will ship early next week (September 12, give or take),
-
How about the UK batch 4 orders? I know the panel is back in stock as mention on Twitter.
-
We are part way through batch 4. On current plan they will be all out by the end of Tuesday
-
Who should I contact on a USA order? #51 & 258, batch 3, haven't heard anything.
-
Filastruder, using the contact form.
We've done all the labels manually so tracking information was not sent, but I'm happy to provide it upon request.
-
I received mine yesterday here in Florida. Order #251 batch 3.
-
Who should I contact on a USA order? #51 & 258, batch 3, haven't heard anything.
I think that is to be delivered today. I have it marked as shipped on the master list, and I believe it was combined with a previous order of yours which is out for delivery today. Please get in touch via the Filastruder contact form if that turns out not to be the case.
-
How about #359 B4? Just so I know when to wait in.
-
Well, for what it's worth I'm order #278 from Batch 4. I asked Tim about it last week and he said it should be going out sometime early this week.
-
A few from Batch 4 have shipped. The rest are due to arrive (and depart) Wednesday of this week.
-
iDevelo, yours has not. W3DRK, yours has. W3DRK, I think yours has been delivered, today.
-
Oh…thanks for letting me know! Now I need to come up with a reason to leave work early today...
