Someone have tested WolfBite

peirof

Hi,

I am interested in this product.... I'm up to the ~~b...s~~, of warping

https://airwolf3d.com/shop/wolfbite-prevents-3d-printed-parts-from-warping/

Someone can give feedback.... its not cheap..

mrplay1234

Good stuff.... I use a lot of 3D Lac as well

Phaedrux

Good old glue stick on PEI is good enough for me. 99 cents for a 2 pack. Back to school special.

peirof

@mrplay1234 and @phaedrux

I too i have tested 3dlac.... but if the print surface its big.... warping

Some questions:

Material?
Temperatures (bed and Nozzle)?
Chamber? Heated?

mrplay1234

PLA PetG on glass..... open build printer 50c bed for pla and 60 for petg bed size is 300x200

dragonn

@mrplay1234 said in Someone have tested WolfBite:

PLA PetG on glass..... open build printer 50c bed for pla and 60 for petg bed size is 300x200

Never had problem with PLA or PET-G on glass. PET-G can even stick to much to glass.
But I suggest to try out Hegron, yes this is a spray for hairs available in stores like rossmann. It works even with ABS