Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet 2 Wifi + BL-Touch doens´t work, no Trigger-Signal

    Scheduled Pinned Locked Moved Solved
    Duet Hardware and wiring
    7
    43
    4.1k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • JustDundefined
      JustD
      last edited by

      Now it is
      WiFi firmware version 1.22

      WiFi is running..
      Softwareinformationen
      Firmwarename: RepRapFirmware for Duet 2 WiFi/Ethernet
      Firmware Elektronik: Duet WiFi 1.02 or later
      Firmware Version: 2.02(RTOS) (2018-12-24b1)
      WiFi Server Version: 1.22
      Web Interface Version: 1.22.6

      What I see.. is, if I pull off the z-Probe connector, then I see at the web-interface the Z-Probe=1000.
      If I connect back.. there is still 0..

      Also after updating the SW.. no changes with the bltouch stuff.. same es before.

      To check, if the BTouch is OK.. I ordered a new one.. with the ne plastic-Pin.. should be better than so version with the aluminium-Pin. But this arrive in 2 weeks hopfully.

      Any other hints for me?
      I have no Idea whats wrong.

      Own Tronxy X5S modified to 360x360x430, 7 linear-rails (4 Z; 2 Y; 1 X-Axis), 3 independent Z-Axis with 3 Steppers; BL-Touch..
      Duet 2 Wifi 1.04 + DUEX5, 3input-nozzle with 3 extruders, 6mm Glas Plate and 600W silicon-headbed with own powersupply.

      1 Reply Last reply Reply Quote 0
      • Phaedruxundefined
        Phaedrux Moderator
        last edited by

        I can't think of anything other than the probe not working.

        Perhaps you can find something here:
        https://duet3d.dozuki.com/Wiki/BLTouch_Troubleshooting

        Z-Bot CoreXY Build | Thingiverse Profile

        1 Reply Last reply Reply Quote 0
        • Vetiundefined
          Veti
          last edited by

          the clones break easily.
          happend to me as well. would not trigger no matter what.
          i build a bfptouch in the end.
          https://www.thingiverse.com/thing:2890290

          1 Reply Last reply Reply Quote 0
          • JustDundefined
            JustD
            last edited by

            @Phaedrux Thank you for the link.. helpfull

            @Veti yes it seems so as me.
            Your bfptouch looks interesting, if you have no functional printer.. no possible to print one.

            I ordered an origin BLTouch... and maybe next weeks I see more.
            I hope the V 3.0 is much more stable.

            Own Tronxy X5S modified to 360x360x430, 7 linear-rails (4 Z; 2 Y; 1 X-Axis), 3 independent Z-Axis with 3 Steppers; BL-Touch..
            Duet 2 Wifi 1.04 + DUEX5, 3input-nozzle with 3 extruders, 6mm Glas Plate and 600W silicon-headbed with own powersupply.

            1 Reply Last reply Reply Quote 0
            • JustDundefined
              JustD
              last edited by

              I go forward.. temporary I switch to a Z-Switch, to adjust E01 for correct extruding.. done
              I calibrate the X,Y,Z-Axis movement.. Works.... done
              So my test Cube is 20x20x20.. but the heatbed seems to hot.. I couln´d remove the Object from the headbed... smile
              It is as it is placed with superglue.. .. Filament is ABS-neXt from Eins3D.. Wow..

              Sorry for my bad english, I´m not a nativ speaker and my last lesson is much years ago.

              Own Tronxy X5S modified to 360x360x430, 7 linear-rails (4 Z; 2 Y; 1 X-Axis), 3 independent Z-Axis with 3 Steppers; BL-Touch..
              Duet 2 Wifi 1.04 + DUEX5, 3input-nozzle with 3 extruders, 6mm Glas Plate and 600W silicon-headbed with own powersupply.

              1 Reply Last reply Reply Quote 0
              • Phaedruxundefined
                Phaedrux Moderator
                last edited by

                Try heating the bed up again to soften the plastic and see if it can be pulled off. I find it helpful to use something like glue stick to act as a release agent.

                Z-Bot CoreXY Build | Thingiverse Profile

                1 Reply Last reply Reply Quote 0
                • JustDundefined
                  JustD
                  last edited by

                  Now also the E1 is running..
                  WOW I´d never thought before, that so much differences between diverses PFT-supply pipes exist. WOW
                  In my case.. is 30% smaler inner diamenter.. and so .. at a bowden 3D Printer it´s much more power and pressure neccssary.
                  Too much for the filament.
                  I changed these supply pipes.. and all works fine..

                  I learn every day with this printer.

                  Own Tronxy X5S modified to 360x360x430, 7 linear-rails (4 Z; 2 Y; 1 X-Axis), 3 independent Z-Axis with 3 Steppers; BL-Touch..
                  Duet 2 Wifi 1.04 + DUEX5, 3input-nozzle with 3 extruders, 6mm Glas Plate and 600W silicon-headbed with own powersupply.

                  1 Reply Last reply Reply Quote 0
                  • JustDundefined
                    JustD
                    last edited by

                    Glue stick as release agent??..
                    I´v read often, with glue stick some object have a better grip.. instead of better release.

                    I try it at first with a much lower bed temperature. but for today.. it´s a long day for me.. it´s finish.
                    I could remove the Object.. for today.. it´s damaged.. but for the first test..ok

                    Good result.. first probe is print.. and nearly works good.. the side surface are the best what I print ever.. I´m happy with this..
                    for the next day´s I wil spend my eye about the top cover.. that not so good..
                    But this is for my opinion a point of temperatur and speed.

                    At the Moment I print this with very slow speed and 245°c

                    Own Tronxy X5S modified to 360x360x430, 7 linear-rails (4 Z; 2 Y; 1 X-Axis), 3 independent Z-Axis with 3 Steppers; BL-Touch..
                    Duet 2 Wifi 1.04 + DUEX5, 3input-nozzle with 3 extruders, 6mm Glas Plate and 600W silicon-headbed with own powersupply.

                    1 Reply Last reply Reply Quote 0
                    • Phaedruxundefined
                      Phaedrux Moderator
                      last edited by

                      Yes the glue stick also helps it stick, but it keeps the plastic from bonding directly to the print surface.

                      Z-Bot CoreXY Build | Thingiverse Profile

                      1 Reply Last reply Reply Quote 0
                      • dc42undefined
                        dc42 administrators
                        last edited by dc42

                        If the bed is removable from the printer, try putting the bed+print in the fridge or freezer to help remove the print from the bed.

                        Duet WiFi hardware designer and firmware engineer
                        Please do not ask me for Duet support via PM or email, use the forum
                        http://www.escher3d.com, https://miscsolutions.wordpress.com

                        1 Reply Last reply Reply Quote 0
                        • JustDundefined
                          JustD
                          last edited by

                          Oh, it´s this surface.. and I´m happy with this..

                          I playing around with diffrent surfaces at my first printer.. Aluminium+ liquid glue, or (i Don´t know the Word in english) Pertinax like elektronik boards... nothing was really good .
                          Also good conditions are Glass-Surface and it´s really good to remove the objects. But in 350x350x4mm, with 6 little holes.. gmm.. not easy to buy this .. and much expensive.

                          Own Tronxy X5S modified to 360x360x430, 7 linear-rails (4 Z; 2 Y; 1 X-Axis), 3 independent Z-Axis with 3 Steppers; BL-Touch..
                          Duet 2 Wifi 1.04 + DUEX5, 3input-nozzle with 3 extruders, 6mm Glas Plate and 600W silicon-headbed with own powersupply.

                          deckingmanundefined 1 Reply Last reply Reply Quote 0
                          • deckingmanundefined
                            deckingman @JustD
                            last edited by

                            @justd Try 3DLac if you can get it in your part of the world. https://www.3dlac.com/

                            Ian
                            https://somei3deas.wordpress.com/
                            https://www.youtube.com/@deckingman

                            1 Reply Last reply Reply Quote 0
                            • JustDundefined
                              JustD
                              last edited by

                              Hi, yesterday arrive the new BLTouch V3.0.. and .. works super fine...
                              But this one, have other dimensions (Length) as the old one.

                              Whats the best Way to calibrate the BLTouch mechanic?

                              Own Tronxy X5S modified to 360x360x430, 7 linear-rails (4 Z; 2 Y; 1 X-Axis), 3 independent Z-Axis with 3 Steppers; BL-Touch..
                              Duet 2 Wifi 1.04 + DUEX5, 3input-nozzle with 3 extruders, 6mm Glas Plate and 600W silicon-headbed with own powersupply.

                              Phaedruxundefined 1 Reply Last reply Reply Quote 0
                              • JustDundefined
                                JustD
                                last edited by

                                OK.. is done.. hightmap is saved..

                                Own Tronxy X5S modified to 360x360x430, 7 linear-rails (4 Z; 2 Y; 1 X-Axis), 3 independent Z-Axis with 3 Steppers; BL-Touch..
                                Duet 2 Wifi 1.04 + DUEX5, 3input-nozzle with 3 extruders, 6mm Glas Plate and 600W silicon-headbed with own powersupply.

                                1 Reply Last reply Reply Quote 0
                                • Phaedruxundefined
                                  Phaedrux Moderator @JustD
                                  last edited by

                                  @justd said in Duet 2 Wifi + BL-Touch doens´t work, no Trigger-Signal:

                                  Whats the best Way to calibrate the BLTouch mechanic?

                                  https://duet3d.dozuki.com/Wiki/Test_and_calibrate_the_Z_probe
                                  https://duet3d.dozuki.com/Wiki/Using_mesh_bed_compensation

                                  Z-Bot CoreXY Build | Thingiverse Profile

                                  1 Reply Last reply Reply Quote 0
                                  • JustDundefined
                                    JustD
                                    last edited by

                                    Now it´s working.. .. Now I tune some S3D parameters for different filaments.

                                    Does anyone know the scripts for toolchange at printing time?
                                    For print with 2 different Materials or different colors at one Object. I know, should be two objects in one printingfile a combined object.
                                    What I´m searching for is, the scripts for Simplify 3 D.
                                    Ok, it´s a little offtopic here

                                    Own Tronxy X5S modified to 360x360x430, 7 linear-rails (4 Z; 2 Y; 1 X-Axis), 3 independent Z-Axis with 3 Steppers; BL-Touch..
                                    Duet 2 Wifi 1.04 + DUEX5, 3input-nozzle with 3 extruders, 6mm Glas Plate and 600W silicon-headbed with own powersupply.

                                    dc42undefined 1 Reply Last reply Reply Quote 0
                                    • dc42undefined
                                      dc42 administrators @JustD
                                      last edited by

                                      You can do the tool changing either in the Duet's own tool change files (see https://duet3d.dozuki.com/Wiki/ConfiguringRepRapFirmwareCartesianPrinter#Section_Tool_change_files) or in S3D. if you put the commands ni the Duet tool change files, then all S3D needs to generate is a T command to change tool.

                                      Duet WiFi hardware designer and firmware engineer
                                      Please do not ask me for Duet support via PM or email, use the forum
                                      http://www.escher3d.com, https://miscsolutions.wordpress.com

                                      1 Reply Last reply Reply Quote 0
                                      • JustDundefined
                                        JustD
                                        last edited by

                                        Thank you, thats wil help a lot..
                                        But for today I see.. it´s not soo easy to change tool during printing a object.
                                        I try it yesterday maually.. only via WEB-interface.. retract, load.. etc.. and.. I see, I must find out, how much I need to retract for a good and working toll-change.

                                        Own Tronxy X5S modified to 360x360x430, 7 linear-rails (4 Z; 2 Y; 1 X-Axis), 3 independent Z-Axis with 3 Steppers; BL-Touch..
                                        Duet 2 Wifi 1.04 + DUEX5, 3input-nozzle with 3 extruders, 6mm Glas Plate and 600W silicon-headbed with own powersupply.

                                        1 Reply Last reply Reply Quote 0
                                        • JustDundefined
                                          JustD
                                          last edited by

                                          Whow.. These 3-Way-1Nozzle Header.. needs really 55mm for complete retract.
                                          Puuh.. during a print for my feeling too much.

                                          I see at a manual retract and load a new filament via E2 with a ABS with lower quality.. it could be a problem to change.
                                          After I retract te cheap ABS, I can´t load the white, better ABS.. grr..

                                          So I order a Diamond-Nozzle with 3 E3D and only 15mm retract.
                                          I will see what happens next month.

                                          What i think about:
                                          How is it possible, only with the stock Duet 2 Wifi, to use 3 extruders??

                                          Is that possible or do I need a expasion-Board? (it´s heavy expensive)

                                          Own Tronxy X5S modified to 360x360x430, 7 linear-rails (4 Z; 2 Y; 1 X-Axis), 3 independent Z-Axis with 3 Steppers; BL-Touch..
                                          Duet 2 Wifi 1.04 + DUEX5, 3input-nozzle with 3 extruders, 6mm Glas Plate and 600W silicon-headbed with own powersupply.

                                          1 Reply Last reply Reply Quote 0
                                          • dc42undefined
                                            dc42 administrators
                                            last edited by

                                            The expert on the Diamond hot end is @deckingman on this forum. See his blog at https://somei3deas.wordpress.com/tag/diamond-hot-end/.

                                            It's easiest to drive if you add a DueX2 or DueX5 to your system, although that's not the only way.

                                            Duet WiFi hardware designer and firmware engineer
                                            Please do not ask me for Duet support via PM or email, use the forum
                                            http://www.escher3d.com, https://miscsolutions.wordpress.com

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA