Y homing off of the board
-
I am still working on getting by D2 wifi / Ender 3 up and running. I was able to get a copy of the Ender 3 setup/config files for the board and they uploaded fine. The only thing I have changed in the config.g file is the X and Y offsets for the BLTouch. So when i home X, it goes all the way over to the left side (great), Y though homes off of the front edge of the build plate. I am assuming that it should home a centimeter or two inside of the front edge of the build plate. If someone had any thoughts, I would be forever grateful!
-
@bearcattd said in Y homing off of the board:
Y though homes off of the front edge of the build plate. I am assuming that it should home a centimeter or two inside of the front edge of the build plate.
Can you show a picture of what you mean?
Is it that the nozzle is off the bed when it's homed?
-
Thanks! I actually just cracked the code (in my pea brain) for setting the minima settings. I homes just right now!
