Duet and Simplify3D tools
Gummix last edited by Gummix
I can't print anything I sliced with Simplify.
I always get the following errors:
Tools at Duet:
Settings in Simplify:
Can someone help me?
aidar last edited by aidar
I think extruder number should be 0, not 1 in temperature settings.
Gummix last edited by
now i get the temp. but the extruder don't work and i get this Error:
Error: Attempting to extrude with no tool selected.
JadonM last edited by
@Gummix The duet firmware requires a tool to be selected before you can extrude, even if you have only one tool.
Place a T0 in your config or Simplify3D start script and it should fix that error.