Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    heater fault

    Scheduled Pinned Locked Moved Solved
    Tuning and tweaking
    4
    14
    594
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Government_Baconundefined
      Government_Bacon
      last edited by

      i keep getting a heater fault when heating up the hotend from cold cant cant fix it any help

      1 Reply Last reply Reply Quote 0
      • PaulHewundefined
        PaulHew
        last edited by

        Post your config.g please.
        What does your gcode console say?

        RailCore II - Duet Mini + 1LC, Voron V0.1 - Duet Mini
        Voron 2.4 disassembled..... Waiting for the RailCore Mini....

        1 Reply Last reply Reply Quote 0
        • Government_Baconundefined
          Government_Bacon
          last edited by Government_Bacon

          0_1567231630710_config.g

          Error: Heating fault on heater 1, temperature rising much more slowly than the expected 1.0°C/sec

          1 Reply Last reply Reply Quote 0
          • Vetiundefined
            Veti
            last edited by

            M305 P0 T100000 B4138 R4700 ; Set thermistor + ADC parameters for heater 0
            M305 P1 T100000 B4138 R4700 ; Set thermistor + ADC parameters for heater 1

            B4138 is the default and most likely wrong for your thermistors. this can report the wrong temperature.

            1 Reply Last reply Reply Quote 0
            • Government_Baconundefined
              Government_Bacon
              last edited by Government_Bacon

              Error: Heating fault on heater 1, temperature rising much more slowly than the expected 0.9°C/sec
              Error: Heating fault on heater 1, temperature rising much more slowly than the expected 0.7°C/sec

              got to about 60c and got this error after changing the code
              it dose heat up slow

              0_1567271310702_config (1).g

              1 Reply Last reply Reply Quote 0
              • Vetiundefined
                Veti
                last edited by

                could be a failed heating cartridge.

                Government_Baconundefined 1 Reply Last reply Reply Quote 0
                • Government_Baconundefined
                  Government_Bacon @Veti
                  last edited by

                  @veti it is a new heater and the last one did this

                  1 Reply Last reply Reply Quote 0
                  • Vetiundefined
                    Veti
                    last edited by

                    what hotend do you have?
                    the error message means when the hotend is powered on the temperature rises to slowly.

                    1 Reply Last reply Reply Quote 0
                    • JRDMundefined
                      JRDM
                      last edited by JRDM

                      Did you even tune the hot end? Once you got the tune, did you enter those values into the configuration file?

                      1 Reply Last reply Reply Quote 0
                      • Government_Baconundefined
                        Government_Bacon
                        last edited by

                        im using e3d volcano and i have auto tuned it

                        1 Reply Last reply Reply Quote 0
                        • Vetiundefined
                          Veti
                          last edited by

                          @government_bacon said in heater fault:

                          im using e3d volcano and i have auto tuned it

                          the values you have configured for the thermistor are not for an e3d vulcano. the e3d use semitec thermistors.
                          check the resistance of the heater catrige that you have the correct one for your voltage
                          https://matterhackers.dozuki.com/Wiki/E3D_Heater_Cartridge_Resistance

                          1 Reply Last reply Reply Quote 0
                          • Government_Baconundefined
                            Government_Bacon
                            last edited by

                            is there any pages that helps with this setup cant figure out what needs to be changed or added

                            1 Reply Last reply Reply Quote 0
                            • Vetiundefined
                              Veti
                              last edited by

                              in the configurator. when you click on the beta value for the thermistor a selection comes up. select the semitec thermistor.

                              1 Reply Last reply Reply Quote 1
                              • Government_Baconundefined
                                Government_Bacon
                                last edited by Government_Bacon

                                got every thing to work now thanks

                                1 Reply Last reply Reply Quote 0
                                • First post
                                  Last post
                                Unless otherwise noted, all forum content is licensed under CC-BY-SA