Reset button stiff and slow
-
I just got my Duet 2 Maestro, I'm still designing the mount so i didn't turn the board on yet. I am concerned about the reset switch tho. From handling the board and measuring it for the mount, the reset switch seems very stiff, to the point where I worry about breaking the switch just by using enough force to force it pressed, and doesn't have the "click" I usually associate with switches. Also it takes quite long for it to reset to the open position. Is this normal?
-
That doesn't sound normal no. Not sure about the force needed but I'd guess around 100-200g from memory but away from the board so can't double check for you.
-
@matej101 no that is not normal. Can you see if there is anything obviously wrong (solder stuck in, deformed, etc).
-
@t3p3tony no, the only thing that's different from the photos of other duets is that my switch does not have the gold sticker on the top
-
@T3P3Tony Can you tell me the name of the switch so I can get a new one and replace it?
-
@Matej101 it's a LY-A03-02A
-
@T3P3Tony All shops I can find have a minimum order quantity of 1000. Could I get the switch from you?
-
@Matej101 said in Reset button stiff and slow:
@T3P3Tony All shops I can find have a minimum order quantity of 1000. Could I get the switch from you?
Sure ping me an email info@duet3d.com
-
@T3P3Tony Thanks, one more thing. Will I lose the warranty by fixing the switch myself?
-
@Matej101 if it's still under warranty then better to get a warranty replacement, please contact your supplier.
-
@T3P3Tony Thank you, I'll try that and if I can't get it resolved I'll contact you about a replacement switch.
-
I resolved the issue with the retailer, consider this solved. Thank you for all the assistance @T3P3Tony!
