RepRapFirmware 3.0beta12 now available

Rudy2A

Silly question ... RepRapFirmware 3 is only for Duet 3, where he can turn on Duet 2.

pipersw

It's work on duet 2

denke

M143 was not (officially) supported in beta 11 (according to the changelog and the upgrade guide)

Beta 12 does not specify this limitiation, but does not list the addition of support in the changelog either.

So my question is, does beta 12 support M143?

Danal

Installed on Duet3 Hardware. Homing looks much better.

Is there an update for Duet 3 expansion boards?

peirof

What are the changes for users of duet 2 firmware 2.04?

gtj0

If you mean "what do I have to change to upgrade"...
https://duet3d.dozuki.com/Wiki/RepRapFirmware_3_overview

jlipavsky79

about to place an order for a duet 3 mainboard for a cnc build and just would like to clarify that the configuration may have a tab for cnc? i feel this is a very worthy tool for the machine and it would unlock many more options for expand ability in the future for maybe tool changing or laser /plasma cutting.... or even 5-6 axis machining

wilriker

@denke said in RepRapFirmware 3.0beta12 now available:

So my question is, does beta 12 support M143?

There has been no change regarding M143 in the source code since beta 11.

littlehobbyshop

@dc42 Is there a roadmap anywhere? I'm just curious as to what the development plan is, what's being worked on and what might possibly be coming down the line. Not expecting any timescales obviously, I'm just intrigued by the whole process.

dc42

M143 is implemented but not tested yet - and in my book, untested code is broken code.

The priorities for RRF3 development are:

Complete the support for expansion boards on Duet 3
Conditional GCode and object model
Add a few missing features

littlehobbyshop

Conditional GCode sounds amazing and incredibly powerful, look forward to that one. Thanks for the update.

steevebecker

@dc42 Thanks for this rough roadmap.
could you tell us what is the plan for 3HC expansion board ?
Because Can-FD is promissing if all features are working on 3HC (Z probe / servo / Thermocouple ...)

Conditionnal Gcode sounds great too, even I prefer to have features working first

dc42

The following items connected to expansion boards work in beta 12:

Stepper motors, temperature sensors (inc. thermocouple and PT100 but not DHT), heaters (but not heater protections, and not heaters controlled by sensors on a different board), fans (including tacho readings, but excluding fans thermostatically controlled by sensors on a different board).

In the current committed source code, endstop switches are also working; but I need to add a safety feature before I release that.

The following are either not implemented on expansion boards or implementation is in progress, and therefore not working yet:

GPIO output (M42), servo output (M280), trigger inputs, stall detection endstops, Z probes, reporting of stepper driver errors and warnings, additional diagnostics inc. crash reports.

Assuming no component shortages, I estimate that first deliveries to the 3HC to customers will be 5 to 6 weeks from next Monday. So we may just miss delivery before Christmas, in which case deliveries won't start until after New Year. We'll have a better idea next week and we may open a pre-order.

steevebecker

@dc42 thanks for this detailed answer, End of the year sounds Great ! I will that closed to a Christmas Beer

dc42

Endstops are now working on expansion boards, using the main+expansion firmware builds at https://www.dropbox.com/sh/3azy1njy3ayjsbp/AACquxr2m00eV568RZg5QG5wa?dl=0.

smoki3

I still miss a fix for the tool changer scripts, that the Z axis is not moving while tool changing. Also happens on 2.xx

dc42

@smoki3 said in RepRapFirmware 3.0beta12 now available:

I still miss a fix for the tool changer scripts, that the Z axis is not moving while tool changing. Also happens on 2.xx

Please provide a link to the post where you described this. Or, if it is in a thread with lost of other stuff, start a new thread.

smoki3

@dc42 said in RepRapFirmware 3.0beta12 now available:

@smoki3 said in RepRapFirmware 3.0beta12 now available:

I still miss a fix for the tool changer scripts, that the Z axis is not moving while tool changing. Also happens on 2.xx

Please provide a link to the post where you described this. Or, if it is in a thread with lost of other stuff, start a new thread.

Bug in 2.03, 2.04RC1 and latest 3.0 beta: https://forum.duet3d.com/topic/11343/new-reprapfirmware-3-0-early-beta/30

Its already on the bug list. but its a bit hidden. You may have fogotten

I copied the conversation in this thread:

https://forum.duet3d.com/topic/12920/tool-change-moving-in-axis-without-calling-them

dc42

Thanks, I'll put further responses i that thread.

hanshogeland

@dc42 yes :)! I hope I don’t miss the pre-order