Help: Temp Sensors and Homing Issues
-
the Sd card from the duet 2 wifi board cause i do not have one for the panel
-
-
recommended steps per mm for PetG as that is currently the roll of filament i have on the printer
-
Is that a question?
-
Yes that is the question!
-
You'll need to calibrate the extruder.
https://duet3d.dozuki.com/Guide/Ender+3+Pro+and+Duet+Maestro+Guide+Part+4:+Calibration/40#s165
Do you have a known starting value for the extruder typical for that printer/extruder?
-
Example shows an ender 3 i do not own an ender 3
-
Calibrating the extruder is the same process on every printer.
-
have calibrated my extruder here are my numbers.
- 311.82
- 336.82
- 306.82
- 339.82
- 281.82
they all seem inconsistent to me
-
Well it seems to be bouncing around a central value. Try starting with the average. 314.
You may need to do it several more times if your starting value wasn't very close to being correct.
