DUET3D set up video?

[Jim46]

Can anyone recommend an "official" video on setting up the Duet3D 6HC?

[elmoret]

Hi Jim, such a video doesn't really exist, because its not possible to cover all the various types of printers in one video.

This is the documentation to follow:

https://duet3d.dozuki.com/Wiki/Getting_Started_With_Duet_3

Let us know which step you get stuck on, and what you're seeing (post screenshots) and we'll help.

[zapta]

There are non official videos by various vblogers. E.g. https://www.youtube.com/watch?v=6nqddfxHla0 and https://www.youtube.com/watch?v=AF3wHic4EMs&t=222s

I would start with a wiring diagram (what hardware goes to what Duet connector) and the RepRap configurator https://configtool.reprapfirmware.org/Start (and later tweak manually the generated config files as needed).

[considering the veracity of machines that use the Duet I think it will be very difficult to cover all or most cases. That's the cost of having customized and one-of use cases]