topic_solved Updated to RRF3, paneldue 7i stuck at "connecting"
likevvii last edited by likevvii
My paneldue can not connect to my duet wifi 2 anymore. It shows "connecting" on the top right.
I updated my duet wifi 2 to RRF 3.1.1
My panel due worked without failure before this.
My old version was RRF 2.04
I then proceeded to update my panel due firmware successfully and ended up with the same problem; stuck at "connecting" on the top right.
My config file is stock and produced from the reprapconfigurator for V3+ with no extra additions.
sebkritikel last edited by
Add M575 P1 S1 B57600 to your config.g
Had to do that myself with the upgrade to 3.1.0 from one of the RC versions I was on.
Listed in the upgrade notes here for 3.1.0 :https://github.com/Duet3D/RepRapFirmware/blob/v3-dev/WHATS_NEW_RRF3.md
likevvii last edited by
Worked right away!
How do I mark this post as solved?