Duet 3 Mechanical Bed Leveling
-
I noticed when looking through the configurator that the mechanical bed leveling isn't an option any more. Is there more documentation on this new mesh bed compensation?
-
-
From everything I have seen this is the old documentation on it. What changed?
-
g29 is the "new", g32 is the old. changed before my time afaik.
-
@bearer but it doesn't do the leadscrew leveling so why deprecate it?
www.bd3dcustoms.com | BD3DCUSTOMS Supercube
-
maybe this is what you're after?
https://duet3d.dozuki.com/Wiki/Bed_levelling_using_multiple_independent_Z_motors -
Yes but the configurator is saying it is replaced with the new mesh bed leveling.
-
I'll defer to a higher power here, but I don't think that is what it is (meant to be?) saying.
-
Don't know why the mesh bed leveling should 'replace' mechanical leveling. AFAIK, it's allways been a case of getting the best mechanical leveling before running mesh bed compensation on top of the already adjusted bed.
-
The 5 point compensation had nothing to do with mechanical leveling. It was a limited form of mesh compensation based on a few defined points. It was replaced by the G29 mesh compensation because you can easily duplicate the old functionality by simply defining a sparse 3x3 point grid.
