Slicer's What are you guys using ?
-
I am using Ideamaker and very happy with it, similar to Simplify3D and a bit more.
Industrial 3D printing service in the Netherlands - gagatstudio.com
-
The only workspace you are missing is Generative Design, because you are on an education account with unlimited cloud credits, they do not allow you access to GD as it's a very costly service for other users.
The manufacture workspace must have been there the whole time. I do not think they limit capability based on different markets, and the education license certainly has all the features of the commercial licenses (except, GD, in your case, because you're not part of a large Educational institute that is allowed free GD).
The free license is accessible after the 30 day commercial trial. It's been ages since I had to get a free license, but the option is there and people can assist you in finding it.
The point of this is that the FFF slicing in Fusion 360 is still there, for free, in the free version and all other versions and has always been since the day they implemented it. That said, I don't find it very useful mainly due to the limited resolution of the output.
If you need help with anything Fusion 360 related, there is a great Facebook group of users and also some Autodesk staff hang out there. The Fusion 360 forums are also great. Of course, you can always ask me or someone else on this forum and we can try and help you.
PS. I'm not affiliated with Autodesk, but I'm a commercial subscriber to Fusion 360.
*not actually a robot
-
@bot said in Slicer's What are you guys using ?:
I don't think anything Autodesk has done with Fusion 360 has been underhanded. They've been clearly trying to make back some of their investment lately, but that shouldn't be a surprise to anyone. They've invested a lot into the software.
They did initially make a fairly big point of being free and fully featured for anyone not getting rich of it; and I understand they need to make money, which they do by means of my employer throwing money at Autodesk instead of buying licenses and training elsewhere because I spend my own time becoming proficient in Fusion. That doesn't mean I won't quote Ms Shania Twain when they start diverging from the initial idea; I'll never justify spending money for CAD/CAM that doesn't generate any income.
Anyways, about them slicers ... saw IceSL mentioned, looked promising a few years ago, have they lived up to their own expectations?
-
@bot said in Slicer's What are you guys using ?:
The only workspace you are missing is Generative Design, because you are on an education account with unlimited cloud credits, they do not allow you access to GD as it's a very costly service for other users.
btw, was there
... not sure when it was removed, I never used it, I just noticed it's not there. But there's a "shape optimization" under simulation that works for me (not that I used it much)The manufacture workspace must have been there the whole time.
As I said, I used it, then few days ago I noticed it was gone, I "purchased" this extension and now is back there again. A bug, feature, error .. kill me, but I checked twice
especially as I wanna test some routing these days and was disapointed the subtractive is not there any more so I need to use kirimoto or pycam or .. that I have even less experience with (as solidCAM is out of question, and that's the only one I really know how to use)I do not think they limit capability based on different markets, and the education license certainly has all the features of the commercial licenses (except, GD, in your case, because you're not part of a large Educational institute that is allowed free GD).
possible, dunno. I noticed that some screenshots I seen from ppl using free version are different. The issue is - my personal one stopped working so I moved to educational one. No clue what's happening there but I'm happy with educational one as long as they don't start removing features. But TBH I spent 4 hours today with FreeCAD and I'm impressed big time how much they moved forward since the last time I used it :). Anyhow not relevant for this topic, but itches me to create one that does so will be going to do that now and we can continue there
The point of this is that the FFF slicing in Fusion 360 is still there, for free, in the free version and all other versions and has always been since the day they implemented it. That said, I don't find it very useful mainly due to the limited resolution of the output.
**That's important point. **
-
@bearer said in Slicer's What are you guys using ?:
[...]
Anyways, about them slicers ... saw IceSL mentioned, looked promising a few years ago, have they lived up to their own expectations?IMO, IceSL is on the cusp of being the best slicer around. There are lots of little things missing, many of them workflow/UI/UX related. Their slicing algorithm is second to none. Much more accurate than Slic3r or anything out there.
Their licensing is awkward, but they are completely compatible with free hobbyist use -- just not for paid work without emailing and working with their institutional departments.
The support structures in IceSL are very interesting. I wish they had more traditional supports, but what they have can be good for some models, like figurines or other such prints.
The new version they just released includes a generic template for RRF based printers, so you can start slicing and printing right away (with minimal configuration to suit your printer).
-
@bot said in Slicer's What are you guys using ?:
IceSL is on the cusp of being the best slicer around. There are lots of little things missing, many of them workflow/UI/UX related
IceSL reminds me of skeinforge
... the interface is so bad it hurts, but yes, it produces nice code ... it's just pain to use -
@arhi said in Slicer's What are you guys using ?:
@bot said in Slicer's What are you guys using ?:
IceSL is on the cusp of being the best slicer around. There are lots of little things missing, many of them workflow/UI/UX related
IceSL reminds me of skeinforge
... the interface is so bad it hurts, but yes, it produces nice code ... it's just pain to useYou'll be happy to know they just added "service mode" which allows use from a command line.
*not actually a robot
-
Currently I'm still on S3D - I'm a researcher and it allows me to relatively easily hack what I need it to do. However, I'm getting more and more keen to switch to Prusa slicer in the future.
I'm also excited for Fusion to get their slicer going properly, but at the moment it's not really up to the standard of stand alone slicers imo. -
@bot said in Slicer's What are you guys using ?:
You'll be happy to know they just added "service mode" which allows use from a command line.
dunno how happy that will make me
... I loved skeinforge but I got spoiled in the meantime -
I tried most of the free ones.
Mostly I use Simply3D but from time to time I use Cura.
Frederick
-
@felt342 Just started using it today. Still trying to figure out settings and profiles but think it's going to be the one for me.
-
I used S3D for two years, I'm using superslicer now, and I'm very happy with it and get much better quality parts than S3D and CURA. CURA is slow. The only feature I missed from S3D is the ability to easily removed unwanted supports, appart from that, slicer works much much better.
-
SuperSlicer will soon be getting the paint-to-place supports that PrusaSlicer is currently implementing in their alpha version.
Things are looking good for the Slic3r forks. Exciting times.
