@MartinNYHC Take a look at this kit.
@Phaedrux Sorry long work days. I unplugged the BLTouch on both side and plugged it back in. Hard reset and now it is working. Sorry it took so long to get back to you guys.
During printing my SBC says randomly "Network error, not connected" Then shuts down the print I have running. Not sure what is causing this.
@fcwilt makes perfect sense. I will set that. Thank You
@fcwilt I will answer for me. No, my issue was never resolved.
@fcwilt Not necessarily. I just want it to do multiple probes when it checks bed leveling when I home the printer.
I can but does that affect the bed leveling as well ?
@3DPrintingWorld I pulled screws out of all of them and started a retighten. Trying to see if something came loose.
@fcwilt Perhaps. I did print the tool but things move so I will recheck them.
Is there a way to add the a and s parameter to your bed.g when doing the leveling so it does multiple probes ?
@fcwilt gotcha. The are underneath
@fcwilt So the left one is in the middle of the bed on the X axis. The 2 on the right are at the corners of the bed frame. The bed frame sits on the attachment to the linear guide mounts
@fcwilt Perfect. Thank you. Does it matter where in the M558 I put that ?