Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet 3 6hc + SBC just stops printing

    Scheduled Pinned Locked Moved Unsolved
    General Discussion
    4
    29
    975
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Phaedruxundefined
      Phaedrux Moderator
      last edited by

      Can you provide M122 results after the stop?

      Or enable the monitoring I linked above?

      Z-Bot CoreXY Build | Thingiverse Profile

      Stephen6309undefined 2 Replies Last reply Reply Quote 0
      • Stephen6309undefined
        Stephen6309 @Phaedrux
        last edited by Stephen6309

        @Phaedrux I will try the debug mode again, if it does it again.

        Running a similation of a print has worked fine.

        1 Reply Last reply Reply Quote 0
        • Stephen6309undefined
          Stephen6309 @Phaedrux
          last edited by

          @Phaedrux 2020-07-20-DuetPi.img smae thing happens the next day. Tempertures still update, can set them. Simulating print time was completed successfully.
          Emergency stop restores movement.

          Will try to set debug. Stop the servers, and the first command in PuTTy:
          sudo /opt/dsf/bin/DuetControlServer -l debug
          Stops after showing: Updated key volumes

          VNC Connect will not connect, via IP or CXY-MSv1.local.
          Used Advanced IP Scanner to verify IP.
          Connected the touchscreen: desktop screen garbled.

          The M122 is below.

          Did the update and upgrade. That took a while. The update let me set the resolution for the touchscreen. Started print via touchscreen. Stopped again.

          Where is the terminal in 2020-07-20-DuetPi.img?

          Ther M122 doesn't change, except for the bytes transmitted/received.

          m122
          === Diagnostics ===
          RepRapFirmware for Duet 3 MB6HC version 3.1.1 running on Duet 3 MB6HC v1.01 or later (SBC mode)
          Board ID: 08DJM-956L2-G43S8-6J9FD-3SJ6K-TB0LG
          Used output buffers: 1 of 40 (10 max)
          === RTOS ===
          Static ram: 154604
          Dynamic ram: 162844 of which 44 recycled
          Exception stack ram used: 520
          Never used ram: 75204
          Tasks: NETWORK(ready,1972) HEAT(blocked,1188) CanReceiv(suspended,3820) CanSender(suspended,1420) CanClock(blocked,1436) TMC(blocked,68) MAIN(running,4952) IDLE(ready,76)
          Owned mutexes:
          === Platform ===
          Last reset 00:44:07 ago, cause: power up
          Last software reset at 2020-08-22 15:28, reason: User, spinning module LinuxInterface, available RAM 77008 bytes (slot 3)
          Software reset code 0x0010 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0444a000 BFAR 0x00000000 SP 0xffffffff Task MAIN
          Error status: 0
          MCU temperature: min 24.4, current 36.1, max 37.5
          Supply voltage: min 23.9, current 24.2, max 24.3, under voltage events: 0, over voltage events: 0, power good: yes
          12V rail voltage: min 12.0, current 12.1, max 12.2, under voltage events: 0
          Driver 0: standstill, reads 55236, writes 17 timeouts 0, SG min/max 0/253
          Driver 1: standstill, reads 55236, writes 17 timeouts 0, SG min/max 0/956
          Driver 2: standstill, reads 55237, writes 17 timeouts 0, SG min/max 0/1023
          Driver 3: standstill, reads 55237, writes 17 timeouts 0, SG min/max 0/144
          Driver 4: standstill, reads 55244, writes 11 timeouts 0, SG min/max 0/0
          Driver 5: standstill, reads 55244, writes 11 timeouts 0, SG min/max 0/0
          Date/time: 2020-08-23 14:11:55
          Slowest loop: 4.95ms; fastest: 0.14ms
          === Storage ===
          Free file entries: 10
          SD card 0 not detected, interface speed: 37.5MBytes/sec
          SD card longest read time 0.0ms, write time 0.0ms, max retries 0
          === Move ===
          Hiccups: 0(0), FreeDm: 281, MinFreeDm: 281, MaxWait: 454488ms
          Bed compensation in use: mesh, comp offset 0.000
          === MainDDARing ===
          Scheduled moves: 81, completed moves: 45, StepErrors: 0, LaErrors: 0, Underruns: 0, 0 CDDA state: 3
          === AuxDDARing ===
          Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0 CDDA state: -1
          === Heat ===
          Bed heaters = 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
          Heater 0 is on, I-accum = 0.3
          Heater 1 is on, I-accum = 0.3
          === GCodes ===
          Segments left: 1
          Movement lock held by null
          HTTP* is ready with "M122" in state(s) 0
          Telnet is idle in state(s) 0
          File* is doing "G1 X217.895996 Y52.673000 E4.612160" in state(s) 0
          USB is idle in state(s) 0
          Aux is idle in state(s) 0
          Trigger* is idle in state(s) 0
          Queue is idle in state(s) 0
          LCD is idle in state(s) 0
          SBC is idle in state(s) 0
          Daemon* is idle in state(s) 0
          Aux2 is idle in state(s) 0
          Autopause is idle in state(s) 0
          Code queue is empty.
          === Network ===
          Slowest loop: 0.82ms; fastest: 0.01ms
          Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions Telnet(0), 0 sessions
          HTTP sessions: 0 of 8

          • Ethernet -
            State: disabled
            Error counts: 0 0 0 0 0
            Socket states: 0 0 0 0 0 0 0 0
            === CAN ===
            Messages sent 10514, longest wait 0ms for type 0
            === Linux interface ===
            State: 0, failed transfers: 0
            Last transfer: 17ms ago
            RX/TX seq numbers: 18425/18426
            SPI underruns 0, overruns 0
            Number of disconnects: 0
            Buffer RX/TX: 3548/984-4076
            === Duet Control Server ===
            Duet Control Server v3.1.1
            File:
            Buffered code: G1 X217.896 Y52.673 E4.61216
            Buffered code: G1 X218.739 Y51.836 E0.06141
            Buffered code: G1 X220.019 Y50.790 E0.08550
            Buffered code: G1 X221.406 Y49.902 E0.08514
            Buffered code: G1 X222.512 Y49.340 E0.06417
            Buffered code: G1 X224.040 Y48.744 E0.08481
            Buffered code: G1 X225.634 Y48.327 E0.08515
            Buffered code: G1 X226.859 Y48.133 E0.06416
            Buffered code: G1 X228.509 Y48.038 E0.08547
            Buffered code: G1 X230.116 Y48.130 E0.08319
            Buffered code: G1 X231.213 Y48.294 E0.05735
            Buffered code: G1 X232.297 Y48.546 E0.05755
            Buffered code: G1 X233.827 Y49.053 E0.08332
            Buffered code: G1 X234.844 Y49.503 E0.05755
            Buffered code: G1 X236.252 Y50.288 E0.08331
            Buffered code: G1 X237.164 Y50.919 E0.05735
            Buffered code: G1 X238.389 Y51.943 E0.08255
            Buffered code: G1 X239.180 Y52.747 E0.05833
            Buffered code: G1 X240.199 Y53.992 E0.08319
            Buffered code: G1 X240.819 Y54.920 E0.05768
            Buffered code: G1 X241.581 Y56.323 E0.08255
            Buffered code: G1 X242.018 Y57.355 E0.05800
            Buffered code: G1 X242.506 Y58.882 E0.08287
            Buffered code: G1 X242.741 Y59.966 E0.05735
            Buffered code: G1 X242.931 Y61.507 E0.08028
            Buffered code: G1 X242.966 Y237.499 E9.09980
            Buffered code: G1 X242.873 Y239.115 E0.08374
            Buffered code: G1 X242.703 Y240.243 E0.05898
            Buffered code: G1 X242.306 Y241.812 E0.08365
            Buffered code: G1 X241.890 Y242.968 E0.06355
            Buffered code: G1 X241.238 Y244.352 E0.07911
            Buffered code: G1 X240.607 Y245.411 E0.06371
            ==> 1512 bytes
            Code buffer space: 2572
            Configured SPI speed: 8000000 Hz
            Full transfers per second: 1.32
            File /opt/dsf/sd/gcodes/PETG_Spacer3mm20mmX8.gcode is selected, processing
          1 Reply Last reply Reply Quote 0
          • Stephen6309undefined
            Stephen6309
            last edited by

            Pulled the 5vdc to Pi jumper and tried powering the pi4 from a wall wart, no change.

            1 Reply Last reply Reply Quote 0
            • Stephen6309undefined
              Stephen6309
              last edited by

              Tried a new setup on a different card. Can't connect to the Pi4, DWC or PuTTy doesn't connect. Put other card back, it connects, but won't keep printing. does show a low voltage on the screen just before to showes DWC. Tried the Pi0W again with the 2020-07-20-DuetPi.img, didn't connect.

              Next: direct connection, it works.

              Looks like my Pi4 is flakey, need to get another one. Will know for sure in a few days.

              Stephen6309undefined 1 Reply Last reply Reply Quote 0
              • Stephen6309undefined
                Stephen6309 @Stephen6309
                last edited by

                @Stephen6309 So far, the direct mode is still working.

                1 Reply Last reply Reply Quote 1
                • Stephen6309undefined
                  Stephen6309
                  last edited by

                  Update: Got a new Pi4 from Adafruit with an acrylic case. Installed DuetPi OS with GUI and a fanshim. So far it works and seem to be a bit more responsive. Printed a magic fish just fine.

                  In a few days, we'll see if it stays working

                  Stephen6309undefined 1 Reply Last reply Reply Quote 1
                  • Stephen6309undefined
                    Stephen6309 @Stephen6309
                    last edited by

                    It's still printing.

                    1 Reply Last reply Reply Quote 0
                    • Stephen6309undefined
                      Stephen6309
                      last edited by

                      Spoke too soon. It's doing it again. Going to ask for a new ribbon cable.

                      1 Reply Last reply Reply Quote 1
                      • Stephen6309undefined
                        Stephen6309
                        last edited by

                        @dc42
                        @T3P3Tony

                        Filastruder needs authorization for a replacement cable.

                        dc42undefined 1 Reply Last reply Reply Quote 0
                        • dc42undefined
                          dc42 administrators @Stephen6309
                          last edited by

                          @Stephen6309 said in Duet 3 6hc + SBC just stops printing:

                          @dc42
                          @T3P3Tony

                          Filastruder needs authorization for a replacement cable.

                          Approved.

                          Duet WiFi hardware designer and firmware engineer
                          Please do not ask me for Duet support via PM or email, use the forum
                          http://www.escher3d.com, https://miscsolutions.wordpress.com

                          Stephen6309undefined 1 Reply Last reply Reply Quote 0
                          • Stephen6309undefined
                            Stephen6309
                            last edited by

                            Received new ribbon cable, installed last Thursday. Worked fine Thursday and Saturday. Today it's once again stopping during the skirt. Emergancy stop needed to get any axes to move. The ribblon cable wasn't the problem. Can run in direct mode with no problems.

                            Disabled the write buffer:
                            M122
                            === Diagnostics ===
                            RepRapFirmware for Duet 3 MB6HC version 3.1.1 running on Duet 3 MB6HC v1.01 or later (SBC mode)
                            Board ID: 08DJM-956L2-G43S8-6J9FD-3SJ6K-TB0LG
                            Used output buffers: 1 of 40 (10 max)
                            === RTOS ===
                            Static ram: 154604
                            Dynamic ram: 163052 of which 44 recycled
                            Exception stack ram used: 504
                            Never used ram: 75012
                            Tasks: ETHERNET(blocked,832) NETWORK(ready,1968) HEAT(blocked,1188) CanReceiv(suspended,3820) CanSender(suspended,1432) CanClock(blocked,1436) TMC(blocked,68) MAIN(running,4952) IDLE(ready,76)
                            Owned mutexes:
                            === Platform ===
                            Last reset 00:04:28 ago, cause: software
                            Last software reset at 2020-10-04 14:15, reason: User, spinning module LinuxInterface, available RAM 75204 bytes (slot 2)
                            Software reset code 0x0010 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0444a000 BFAR 0x00000000 SP 0xffffffff Task MAIN
                            Error status: 0
                            MCU temperature: min 37.6, current 39.4, max 40.1
                            Supply voltage: min 23.7, current 24.2, max 24.2, under voltage events: 0, over voltage events: 0, power good: yes
                            12V rail voltage: min 12.0, current 12.1, max 12.2, under voltage events: 0
                            Driver 0: ok, reads 59415, writes 17 timeouts 0, SG min/max 0/930
                            Driver 1: ok, reads 59416, writes 17 timeouts 0, SG min/max 0/1023
                            Driver 2: ok, reads 59416, writes 17 timeouts 0, SG min/max 0/846
                            Driver 3: standstill, reads 59417, writes 17 timeouts 0, SG min/max 0/133
                            Driver 4: standstill, reads 59423, writes 11 timeouts 0, SG min/max 0/0
                            Driver 5: standstill, reads 59424, writes 11 timeouts 0, SG min/max 0/0
                            Date/time: 2020-10-04 14:20:07
                            Slowest loop: 5.34ms; fastest: 0.14ms
                            === Storage ===
                            Free file entries: 10
                            SD card 0 not detected, interface speed: 37.5MBytes/sec
                            SD card longest read time 0.0ms, write time 0.0ms, max retries 0
                            === Move ===
                            Hiccups: 0(0), FreeDm: 295, MinFreeDm: 295, MaxWait: 77339ms
                            Bed compensation in use: mesh, comp offset 0.000
                            === MainDDARing ===
                            Scheduled moves: 175, completed moves: 115, StepErrors: 0, LaErrors: 0, Underruns: 0, 0 CDDA state: 3
                            === AuxDDARing ===
                            Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0 CDDA state: -1
                            === Heat ===
                            Bed heaters = 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
                            Heater 0 is on, I-accum = 0.1
                            Heater 1 is on, I-accum = 0.3
                            === GCodes ===
                            Segments left: 1
                            Movement lock held by null
                            HTTP* is ready with "M122" in state(s) 0
                            Telnet is idle in state(s) 0
                            File* is doing "G1 X102.293999 Y192.054993 E0.178150" in state(s) 0
                            USB is idle in state(s) 0
                            Aux is idle in state(s) 0
                            Trigger* is idle in state(s) 0
                            Queue is idle in state(s) 0
                            LCD is idle in state(s) 0
                            SBC is idle in state(s) 0
                            Daemon* is idle in state(s) 0 0, running macro
                            Aux2 is idle in state(s) 0
                            Autopause is idle in state(s) 0
                            Code queue is empty.
                            === Network ===
                            Slowest loop: 0.97ms; fastest: 0.01ms
                            Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions Telnet(0), 0 sessions
                            HTTP sessions: 0 of 8

                            • Ethernet -
                              State: establishingLink
                              Error counts: 0 0 0 0 0
                              Socket states: 0 0 0 0 0 0 0 0
                              === CAN ===
                              Messages sent 1050, longest wait 0ms for type 0
                              === Linux interface ===
                              State: 0, failed transfers: 0
                              Last transfer: 20ms ago
                              RX/TX seq numbers: 8369/8371
                              SPI underruns 0, overruns 0
                              Number of disconnects: 0
                              Buffer RX/TX: 3696/1128-4080
                              === Duet Control Server ===
                              Duet Control Server v3.1.1
                              File:
                              Buffered code: G1 X102.294 Y192.055 E0.17815
                              Buffered code: G1 X100.964 Y188.823 E0.16215
                              Buffered code: G1 X99.743 Y185.547 E0.16218
                              Buffered code: G1 X98.556 Y182.005 E0.17331
                              Buffered code: G1 X97.531 Y178.554 E0.16700
                              Buffered code: G1 X96.647 Y175.165 E0.16248
                              Buffered code: G1 X95.826 Y171.521 E0.17331
                              Buffered code: G1 X95.157 Y167.978 E0.16730
                              Buffered code: G1 X94.623 Y164.523 E0.16218
                              Buffered code: G1 X94.178 Y160.820 E0.17301
                              Buffered code: G1 X93.865 Y157.103 E0.17304
                              Buffered code: G1 X93.688 Y153.606 E0.16246
                              Buffered code: G1 X93.627 Y150.000 E0.16730
                              Buffered code: G1 X93.693 Y146.271 E0.17304
                              Buffered code: G1 X93.872 Y142.780 E0.16216
                              Buffered code: G1 X94.178 Y139.187 E0.16730
                              Buffered code: G1 X94.623 Y135.477 E0.17334
                              Buffered code: G1 X95.157 Y132.023 E0.16215
                              Buffered code: G1 X95.806 Y128.581 E0.16248
                              Buffered code: G1 X96.645 Y124.841 E0.17782
                              Buffered code: G1 X97.529 Y121.452 E0.16248
                              Buffered code: G1 X98.523 Y118.101 E0.16218
                              Buffered code: G1 X99.703 Y114.563 E0.17301
                              Buffered code: G1 X101.008 Y111.069 E0.17304
                              Buffered code: G1 X102.339 Y107.837 E0.16216
                              Buffered code: G1 X103.778 Y104.651 E0.16218
                              Buffered code: G1 X105.429 Y101.300 E0.17331
                              Buffered code: G1 X107.134 Y98.122 E0.16730
                              Buffered code: G1 X108.890 Y95.099 E0.16218
                              Buffered code: G1 X110.873 Y91.933 E0.17331
                              Buffered code: G1 X112.893 Y88.946 E0.16730
                              Buffered code: G1 X114.911 Y86.166 E0.15940
                              ==> 1532 bytes
                              Daemon:
                              Finishing macro daemon.g, started by system

                            Next stack level
                            Code buffer space: 2568
                            Configured SPI speed: 8000000 Hz
                            Full transfers per second: 32.12
                            File /opt/dsf/sd/gcodes/SPOOL/PLA_custom_B_2_215C.gcode is selected, processing

                            After the emergency stop:
                            m122
                            === Diagnostics ===
                            RepRapFirmware for Duet 3 MB6HC version 3.1.1 running on Duet 3 MB6HC v1.01 or later (SBC mode)
                            Board ID: 08DJM-956L2-G43S8-6J9FD-3SJ6K-TB0LG
                            Used output buffers: 1 of 40 (10 max)
                            === RTOS ===
                            Static ram: 154604
                            Dynamic ram: 163052 of which 44 recycled
                            Exception stack ram used: 512
                            Never used ram: 75004
                            Tasks: ETHERNET(blocked,832) NETWORK(ready,1968) HEAT(blocked,1188) CanReceiv(suspended,3820) CanSender(suspended,1420) CanClock(blocked,1436) TMC(blocked,192) MAIN(running,4952) IDLE(ready,76)
                            Owned mutexes:
                            === Platform ===
                            Last reset 00:02:33 ago, cause: software
                            Last software reset at 2020-10-04 14:26, reason: User, spinning module LinuxInterface, available RAM 75452 bytes (slot 0)
                            Software reset code 0x0010 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0444a000 BFAR 0x00000000 SP 0xffffffff Task MAIN
                            Error status: 0
                            MCU temperature: min 39.0, current 39.6, max 40.3
                            Supply voltage: min 23.7, current 24.0, max 24.2, under voltage events: 0, over voltage events: 0, power good: yes
                            12V rail voltage: min 12.0, current 12.1, max 12.1, under voltage events: 0
                            Driver 0: standstill, reads 29308, writes 17 timeouts 0, SG min/max 0/260
                            Driver 1: standstill, reads 29308, writes 17 timeouts 0, SG min/max 0/255
                            Driver 2: standstill, reads 29309, writes 17 timeouts 0, SG min/max 0/459
                            Driver 3: standstill, reads 29309, writes 17 timeouts 0, SG min/max 0/122
                            Driver 4: standstill, reads 29316, writes 11 timeouts 0, SG min/max 0/0
                            Driver 5: standstill, reads 29316, writes 11 timeouts 0, SG min/max 0/0
                            Date/time: 2020-10-04 14:28:51
                            Slowest loop: 5.20ms; fastest: 0.14ms
                            === Storage ===
                            Free file entries: 10
                            SD card 0 not detected, interface speed: 37.5MBytes/sec
                            SD card longest read time 0.0ms, write time 0.0ms, max retries 0
                            === Move ===
                            Hiccups: 0(0), FreeDm: 295, MinFreeDm: 295, MaxWait: 83293ms
                            Bed compensation in use: mesh, comp offset 0.000
                            === MainDDARing ===
                            Scheduled moves: 175, completed moves: 115, StepErrors: 0, LaErrors: 0, Underruns: 0, 0 CDDA state: 3
                            === AuxDDARing ===
                            Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0 CDDA state: -1
                            === Heat ===
                            Bed heaters = 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
                            Heater 0 is on, I-accum = 0.1
                            Heater 1 is on, I-accum = 0.4
                            === GCodes ===
                            Segments left: 1
                            Movement lock held by null
                            HTTP* is ready with "M122" in state(s) 0
                            Telnet is idle in state(s) 0
                            File* is doing "G1 X102.293999 Y192.054993 E0.178150" in state(s) 0
                            USB is idle in state(s) 0
                            Aux is idle in state(s) 0
                            Trigger* is idle in state(s) 0
                            Queue is idle in state(s) 0
                            LCD is idle in state(s) 0
                            SBC is idle in state(s) 0
                            Daemon* is idle in state(s) 0
                            Aux2 is idle in state(s) 0
                            Autopause is idle in state(s) 0
                            Code queue is empty.
                            === Network ===
                            Slowest loop: 0.95ms; fastest: 0.01ms
                            Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions Telnet(0), 0 sessions
                            HTTP sessions: 0 of 8

                            • Ethernet -
                              State: establishingLink
                              Error counts: 0 0 0 0 0
                              Socket states: 0 0 0 0 0 0 0 0
                              === CAN ===
                              Messages sent 588, longest wait 0ms for type 0
                              === Linux interface ===
                              State: 0, failed transfers: 0
                              Last transfer: 19ms ago
                              RX/TX seq numbers: 4669/4671
                              SPI underruns 0, overruns 0
                              Number of disconnects: 0
                              Buffer RX/TX: 3696/1128-4080
                              === Duet Control Server ===
                              Duet Control Server v3.1.1
                              File:
                              Buffered code: G1 X102.294 Y192.055 E0.17815
                              Buffered code: G1 X100.964 Y188.823 E0.16215
                              Buffered code: G1 X99.743 Y185.547 E0.16218
                              Buffered code: G1 X98.556 Y182.005 E0.17331
                              Buffered code: G1 X97.531 Y178.554 E0.16700
                              Buffered code: G1 X96.647 Y175.165 E0.16248
                              Buffered code: G1 X95.826 Y171.521 E0.17331
                              Buffered code: G1 X95.157 Y167.978 E0.16730
                              Buffered code: G1 X94.623 Y164.523 E0.16218
                              Buffered code: G1 X94.178 Y160.820 E0.17301
                              Buffered code: G1 X93.865 Y157.103 E0.17304
                              Buffered code: G1 X93.688 Y153.606 E0.16246
                              Buffered code: G1 X93.627 Y150.000 E0.16730
                              Buffered code: G1 X93.693 Y146.271 E0.17304
                              Buffered code: G1 X93.872 Y142.780 E0.16216
                              Buffered code: G1 X94.178 Y139.187 E0.16730
                              Buffered code: G1 X94.623 Y135.477 E0.17334
                              Buffered code: G1 X95.157 Y132.023 E0.16215
                              Buffered code: G1 X95.806 Y128.581 E0.16248
                              Buffered code: G1 X96.645 Y124.841 E0.17782
                              Buffered code: G1 X97.529 Y121.452 E0.16248
                              Buffered code: G1 X98.523 Y118.101 E0.16218
                              Buffered code: G1 X99.703 Y114.563 E0.17301
                              Buffered code: G1 X101.008 Y111.069 E0.17304
                              Buffered code: G1 X102.339 Y107.837 E0.16216
                              Buffered code: G1 X103.778 Y104.651 E0.16218
                              Buffered code: G1 X105.429 Y101.300 E0.17331
                              Buffered code: G1 X107.134 Y98.122 E0.16730
                              Buffered code: G1 X108.890 Y95.099 E0.16218
                              Buffered code: G1 X110.873 Y91.933 E0.17331
                              Buffered code: G1 X112.893 Y88.946 E0.16730
                              Buffered code: G1 X114.911 Y86.166 E0.15940
                              ==> 1532 bytes
                              Code buffer space: 2568
                              Configured SPI speed: 8000000 Hz
                              Full transfers per second: 31.71
                              File /opt/dsf/sd/gcodes/SPOOL/PLA_custom_B_2_215C.gcode is selected, processing
                            1 Reply Last reply Reply Quote 0
                            • Stephen6309undefined
                              Stephen6309 @dc42
                              last edited by

                              @dc42 Looks like the problem is with the Duet 3. M122 in prior post.

                              1 Reply Last reply Reply Quote 0
                              • dc42undefined
                                dc42 administrators
                                last edited by

                                @Stephen6309, thanks for your report. Please try release 3.2beta2 which we plan to release later today.

                                Duet WiFi hardware designer and firmware engineer
                                Please do not ask me for Duet support via PM or email, use the forum
                                http://www.escher3d.com, https://miscsolutions.wordpress.com

                                Stephen6309undefined 2 Replies Last reply Reply Quote 0
                                • Stephen6309undefined
                                  Stephen6309 @dc42
                                  last edited by

                                  @dc42 I've installed it. It's currently printing, but problem usually has taken a few days to show up. Will update later this week.

                                  1 Reply Last reply Reply Quote 0
                                  • Stephen6309undefined
                                    Stephen6309 @dc42
                                    last edited by

                                    @dc42 So far, it's working fine. Had to change to my BLTouch v3.1 from the first original version.

                                    dc42undefined 1 Reply Last reply Reply Quote 0
                                    • dc42undefined
                                      dc42 administrators @Stephen6309
                                      last edited by

                                      @Stephen6309 said in Duet 3 6hc + SBC just stops printing:

                                      @dc42 So far, it's working fine. Had to change to my BLTouch v3.1 from the first original version.

                                      Thanks. What was the problem with the older BLTouch?

                                      Duet WiFi hardware designer and firmware engineer
                                      Please do not ask me for Duet support via PM or email, use the forum
                                      http://www.escher3d.com, https://miscsolutions.wordpress.com

                                      Stephen6309undefined 1 Reply Last reply Reply Quote 0
                                      • Stephen6309undefined
                                        Stephen6309 @dc42
                                        last edited by

                                        @dc42 It would do a double tap on the bed. It would do it when homing Z, and doing the G29.

                                        Watching it do it, the moment it would hit the bed, it would fully retract, but it would imediately redeploy and trigger again.

                                        Watching the 3.1, it would trigger and not rectract completely, the full retract was delayed,

                                        1 Reply Last reply Reply Quote 0
                                        • First post
                                          Last post
                                        Unless otherwise noted, all forum content is licensed under CC-BY-SA