Delta printer prints parallelograms and other problems
-
@engikeneer
In my start Gcode the homing is after the heating both Bed and Nozzle. Also my Meshprobing is on Hot Bed and Nozzle. -
I found the problem with the repeatability: it was a bad soldering on the opamp (I beleave).
Thanks to all helpers
-
@Radio-Active said in Delta printer prints parallelograms and other problems:
I found the problem with the repeatability: it was a bad soldering on the opamp (I beleave).
Thanks to all helpers
Do you happen to have a photo? I presume you've touched it up and resolved the issue?
-
@Phaedrux unfortunatly I don't have a picture. The sobering looked nice (even with a Magnifying Glas) till I got it under the Microscope and did a seepin test with special dye.
-
Well if it's working now and you are satisfied with that we can leave it at that.