Random Smart Effector flashes
-
Does the random flashing stop when you raise the effector well above the bed?
Duet WiFi hardware designer and firmware engineer
Please do not ask me for Duet support via PM or email, use the forum
http://www.escher3d.com, https://miscsolutions.wordpress.com -
@dc42 no the random can happen also while its home which is very far from the bed
-
the light shown is that led's on/near the effector? does it help to turn lights off?
-
these lights of the smart effector why turn off? you think its related to the random flash ?
-
@sankafola said in Random Smart Effector flashes:
these lights of the smart effector why turn off? you think its related to the random flash ?
was just thinking if they were external leds and you're looking for a source of noise, it'd be worth looking into.
-
its built in LED in the smart effector and i dont think its related because they are on while its working normal too its built that way
-
@dc42 just to be sure the LED which flash random is the same LED which flashes 2 times when it turn on the printer
-
@dc42 what do you think ? do you think the smart effector the card itself have something wrong ?
-
We will authorize a warranty replacement on the Smart Effector. It's possible there is an issue with it causing it to be too sensitive. Please contact your vendor and initiate a warranty exchange. Include a link to this thread as authorization.
-
@Phaedrux thank you will do
