Native App for Duet3d/RRF - Wishlist

nomukaiki

@jay_s_uk was there an option to add manually?
What did you use instead? Thanks.

chrishamm

@jay_s_uk The Duet 2 Ethernet didn't support mDNS until approx. 1 year ago when I added a new responder for it. When was the last time you tried it? I'm not sure about LPC/STM ports because the app scans for "Duet" in the product name, not LPC or STM, and I don't know if these two ports even provide mDNS.

PS: It may be that the Duet 2 Ethernet cannot be discovered with that app but if you type "<duet hostname>.local" in your browser, you should be able to connect to it. I haven't added a facility to add custom devices to the app yet.

jay_s_uk

@chrishamm ah, well that'll probably be when I last tested it so I stand corrected
I just installed the app again and can see the duet mini and an LPC+SBC printer.
Does the duet 2 wifi support it? Is the mDNS built into the wifi firmware or the duet firmware itself?

chrishamm

@jay_s_uk Yes, the Duet 2 WiFi (and the upcoming Duet 3 Mini 5+) support mDNS and the app supports them because the WiFi firmware sets up its own little mDNS server. On the Duet 3 + SBC (i.e. with DuetPi) we have Avahi running on Linux with a custom service file. On the Duet 2 Ethernet/Maestro we only have a responder for mDNS hostname queries. AFAIK we use mDNS responders by LwIP for Duet 3 Ethernet variants which can be found by the app as well.

nomukaiki

@chrishamm out of curiosity, why not allowing to enter manually the printer hostname?
I usually create a portforward on my router so that I can monitor/control the printers outside of the local network. Is this uncommon ?

chrishamm

@nomukaiki Sure, that's a good idea, I just haven't touched the app for ages

nomukaiki

@chrishamm hopefully you will not need to and I manage to complete mine

If you have some real responses for rr_status?type=1 2 & 3 on a few different configurations that would be useful, since I only have 2 printers with simple setup (1 tool, 1 extruder, zprobe is bltouch). I could mock this, but having it confirmed from real printers would be ideal. Thanks.

chrishamm

@nomukaiki See here. Just be aware that the object model (available via rr_model) is preferred because it's exposed by DSF and Duets in standalone mode whereas status responses are not provided by DSF (although you could write an emulator plugin for rr_ requests using the latest DSF beta).

nomukaiki

@chrishamm many thanks!
I feel silly not having seen this before from the root of the firmware spec. I was under the impression that the network was a separate module.

arhi

@nomukaiki said in Native App for Duet3d/RRF - Wishlist:

@arhi What do you really like about Printoid?

there is nothing special about it that I specifically like. I like it as it is so far the best app for octoprint that I tried (I did not try many I have to admit), and I like that it works on "el crap" 25eur android phone that I have a bunch of.

@chrishamm said in Native App for Duet3d/RRF - Wishlist:

What platform are you talking about? If you're looking for an Android app, I made one years ago, although I guess I could polish it again. Anyway, it's still working on Android 11 and lets you find Duets conveniently on the same network.

android and ios but mostly android if you ask me. might be cool if you had that app open source if someone is maybe interested to upgrade it . it's not very "application like" it's more like web from what I see.. but I don't see anything else available..

T3P3Tony

@arhi said in Native App for Duet3d/RRF - Wishlist:

might be cool if you had that app open source

@chrishamm said in Native App for Duet3d/RRF - Wishlist:

The source code is available here: https://github.com/Duet3D/FindMyDuet

nomukaiki

How would you rank or score the below features for a native app?
Can you please reply with your preferred order of importance? Most important on top. Thanks.

1- Available on very old devices (Android, iOS)
2- Open source
3- Auto discovery of printers on local network
4- 3d GCode preview and sync current printing layer
5- Live webcam
6- Timelapses
7- Full management/control/configuration of Duet printer (similar to DWC)
8- Reduced set of features but adapted for mobile devices (similar to Printoid or DuetPanel)
9- Status change push notifications
10- Temperature chart with download full graph option
11- Dark/Light colour themes
12- AI detection of failed print (detect skipping filament steps, part detached from base and stringing printing)
13- Easy and secure remote access from outside of local network

My preferred order:
8, 4, 9, 5, 13, 11, 12, 3, 6, 1, 10, 7, 2

arhi

@nomukaiki said in Native App for Duet3d/RRF - Wishlist:

How would you rank'

1- Available on very old devices (Android 4.1 with 128-256MB RAM)
2- Open source
5- Live webcam
13- multiple printers supported in same time
7- Full control (management and configuration - irrelevant)

jay_s_uk

remote access to a duet in a similar fashion that can can be done with octoprint
obviously an SBC would be required for this though

Sindarius

At one point some time ago I started work on a flutter app to control my printers. Been so busy with other projects I haven’t been able to get back to it.

https://youtu.be/u6HS1jbjhvA

There is a lot of potential to build some creative duet controls depending on need.

nomukaiki

@Sindarius said in Native App for Duet3d/RRF - Wishlist:

I started work on a flutter app to control my printers

This is great. Hopefully I will manage to go a bit further. I am focusing first on the application core (network, data layer, reactive services, etc) and then will do the UI. But I also got the basics working quickly, so there is hope

jay_s_uk

@nomukaiki free for testing if you need any.
I have enough machines to play with

nomukaiki

@jay_s_uk said in Native App for Duet3d/RRF - Wishlist:

@nomukaiki free for testing if you need any.
I have enough machines to play with

That will be super useful! Thanks! I am interested to speaking with you about the "remote access" that you suggested. I am not sure what other type of remote access you are suggesting. Is it about accessing the printers outside of your local network?

jay_s_uk

@nomukaiki yea. Similar to this for octoprint https://plugins.octoprint.org/plugins/anywhere/

Feel free to pm me

arhi

@jay_s_uk said in Native App for Duet3d/RRF - Wishlist:

@nomukaiki yea. Similar to this for octoprint https://plugins.octoprint.org/plugins/anywhere/

telegram is the best solution for this out there attm imho.
in order to communicate with your printer you either need to allow access to it from the wan (port forwarding - complicated to many users, unsafe..) or you need your printer to initiate connection and in this case you need a "server" somewhere on the internet (the way "anywhere", "the spaghetty..", "telegram" and some other plugins work)... telegram's bot system is awesome and alow you to create super complicate system for free