Newbie: New Install on Ender 5 Plus---Willing to PAY$$$
-
From where, my slicer?
CR10S, August 2018
Anycubic Photon S December 2019
Ender 5 Feb 2020
Ender 5 Plus May 2020
Anycubic Photon Mono X Nov 2020
~
https://3dimensiongames.com/ -
@shatty said in Newbie: New Install on Ender 5 Plus---Willing to PAY$$:
Do i have to auto tune again?
no
-
@RyanP What are you using for a slicer? I thought they are universal across all slicers. Im using Creality's
-
2nd print at 200c. Little better. What should I do next? Drop it more? Im not going to be using PLA. I am just using the sample that came with the printer. I have black PETG. Should I put that in and continue from there?
-
that is already looking good. maybe a bit overextrusion or it could be bad quality filament.
try reducing the flow by 10%petg printing is a bit more difficult compared to pla. its not as forgiving.
-
I compared it to the first print and it actually looks alot better. The layers are more uniformed and color also. I think have it set at 135 for extrusion. I will drop it down to 130.
-
@shatty said in Newbie: New Install on Ender 5 Plus---Willing to PAY$$:
I think have it set at 135 for extrusion. I will drop it down to 130.
is that your esteps or percent of flow?
-
That is esteps
-
pla does not like to be overextruded, but underextrusion is ok.
so try 125 if 130 is the default for your extruder.
-
PETG @ 230 C. Its the best print yet!. There was a little sting inside the cabin. Thats it! Maybe drop it 5 deg?
-
If u see stuff on the side of the hull, thats cat hair. The cat loves going near the stupid printer
-
what happened to the chimney?
next thing to set up is pressure advance.
https://duet3d.dozuki.com/Wiki/Pressure_advance -
Thats a good question LOL. I dunno. I left it running while I was at work
-
@shatty said in Newbie: New Install on Ender 5 Plus---Willing to PAY$$:
Thats a good question LOL.
you cat got it?
you might want to get some plexiglas covers for the side so your cat does not get near it.
