Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    Duet 3 6HC Heater output's

    Scheduled Pinned Locked Moved
    Duet Hardware and wiring
    2
    3
    127
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Turricannundefined
      Turricann
      last edited by

      Hi All,

      I am wondering if anyone can tell me if its normal for a new Duet 3 6HC (unconfigured) to turn on the heater outputs automatically when connected to a heater i am only using one output but when the hotend is connected any output's the heater is powered ?

      other than that the red status led is off presumably because the circuit is not complete.

      1 Reply Last reply Reply Quote 0
      • jay_s_ukundefined
        jay_s_uk
        last edited by

        no, it is not normal for a heater output to automatically turn on.
        Best way to test is to remove the SD card and power the board. If the output comes on, the mosfet has died. If it doesn't, you have an issue with your config.

        Owns various duet boards and is the main wiki maintainer for the Teamgloomy LPC/STM32 port of RRF. Assume I'm running whatever the latest beta/stable build is

        1 Reply Last reply Reply Quote 1
        • Turricannundefined
          Turricann
          last edited by

          I am using a PI3 but none the less you theory still works with the pi disconnected and no SD card in the duet i still get power guess its an email to oozenet for a replacement ..

          1 Reply Last reply Reply Quote 0
          • First post
            Last post
          Unless otherwise noted, all forum content is licensed under CC-BY-SA