Move command not executed from PanelDue + Pendant

[FelixH]

Hi all,

I have a PanelDue with a CNC Pendant on my Duet driven Workbee. I have a macro to rapidly move to the current WCS origin. It is as simple as this

G28 Z
 
G1 X0 Y0

The macro is not executed from the PanelDue, but if I send the G1 command from the web interface is no problem.

Any idea on what the problem could be?

[Phaedrux]

Firmware versions?

[FelixH]

So sorry, I missed that.

RRF2 and PanelDue 2.4, I think

[Veti]

@FelixH said in Move command not executed from PanelDue + Pendant:

PanelDue 2.4

there is no paneldue 2.4 version.

[Phaedrux]

1.24 maybe?

[FelixH]

@Phaedrux said in Move command not executed from PanelDue + Pendant:

1.24 maybe?

yes, certanly. I was talking on the top of my head earlier. I knew there was a 2 and a 4 somewhere...

[Phaedrux]

And firmware version on the Duet?

[FelixH]

@Phaedrux said in Move command not executed from PanelDue + Pendant:

And firmware version on the Duet?

RRF2, this one I got it right, I'm sure...