Duet3D Logo Duet3D
    • Tags
    • Documentation
    • Order
    • Register
    • Login

    ToolBoard: 2 wires fan, heater fault and how to extrude ?

    Scheduled Pinned Locked Moved Unsolved
    Duet Hardware and wiring
    6
    112
    5.4k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Vetiundefined
      Veti @Pseud3mys
      last edited by

      3.1.0 is correct there is no 3.1.1 for the toolboard.

      Pseud3mysundefined 1 Reply Last reply Reply Quote 0
      • Pseud3mysundefined
        Pseud3mys @Veti
        last edited by

        @Veti said in ToolBoard: 2 wires fan, heater fault and how to extrude ?:

        3.1.0 is correct there is no 3.1.1 for the toolboard.

        ah ok. Have you an idea then for the fault state ?

        1 Reply Last reply Reply Quote 0
        • Vetiundefined
          Veti
          last edited by Veti

          @Pseud3mys said in ToolBoard: 2 wires fan, heater fault and how to extrude ?:

          Error: Failed to switch off remote heater 2: Board 122 does not have heater 2

          do you still get this error message?

          Pseud3mysundefined 1 Reply Last reply Reply Quote 0
          • Pseud3mysundefined
            Pseud3mys @Veti
            last edited by

            @Veti no, when I update it now it just put "2000°C" and offline on the web site but he is still connected with the CAN bus

            1 Reply Last reply Reply Quote 0
            • Vetiundefined
              Veti
              last edited by

              post the output of
              M122 B121
              and
              M122 B122

              Pseud3mysundefined 1 Reply Last reply Reply Quote 0
              • Pseud3mysundefined
                Pseud3mys @Veti
                last edited by

                @Veti Capture.PNG

                1 Reply Last reply Reply Quote 0
                • Vetiundefined
                  Veti
                  last edited by

                  you power down the system after the firmware update?

                  also power the normal M122 output

                  Pseud3mysundefined 1 Reply Last reply Reply Quote 0
                  • Pseud3mysundefined
                    Pseud3mys @Veti
                    last edited by

                    @Veti yes, what is the M122 output ?

                    1 Reply Last reply Reply Quote 0
                    • Vetiundefined
                      Veti
                      last edited by

                      i meant provide the m122 output

                      Pseud3mysundefined 1 Reply Last reply Reply Quote 0
                      • Pseud3mysundefined
                        Pseud3mys @Veti
                        last edited by

                        @Veti said in ToolBoard: 2 wires fan, heater fault and how to extrude ?:

                        i meant provide the m122 output

                        it was not this ?

                        @Pseud3mys said in ToolBoard: 2 wires fan, heater fault and how to extrude ?:

                        @Veti Capture.PNG

                        1 Reply Last reply Reply Quote 0
                        • Vetiundefined
                          Veti
                          last edited by

                          no just send M122. that will provide the output for the duet 3

                          Pseud3mysundefined 1 Reply Last reply Reply Quote 0
                          • Pseud3mysundefined
                            Pseud3mys @Veti
                            last edited by

                            @Veti ah okay, the popup say "response too long, see console"
                            02/12/2020 à 19:08:20 M122
                            === Diagnostics ===
                            RepRapFirmware for Duet 3 MB6HC version 3.1.1 running on Duet 3 MB6HC v1.01 or later (standalone mode)
                            Board ID: 08DJM-956BA-NA3TJ-6J1D2-3SD6M-9B9LT
                            Used output buffers: 1 of 40 (23 max)
                            === RTOS ===
                            Static ram: 154604
                            Dynamic ram: 162588 of which 36 recycled
                            Exception stack ram used: 224
                            Never used ram: 75764
                            Tasks: NETWORK(ready,292) ETHERNET(blocked,436) HEAT(blocked,1248) CanReceiv(suspended,3404) CanSender(suspended,1488) CanClock(blocked,1436) TMC(blocked,204) MAIN(running,4520) IDLE(ready,76)
                            Owned mutexes: LwipCore(NETWORK)
                            === Platform ===
                            Last reset 00:00:54 ago, cause: software
                            Last software reset at 2020-12-02 19:07, reason: User, spinning module GCodes, available RAM 75728 bytes (slot 2)
                            Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0444a000 BFAR 0x00000000 SP 0xffffffff Task MAIN
                            Error status: 0
                            MCU temperature: min 36.6, current 37.0, max 37.6
                            Supply voltage: min 12.2, current 12.3, max 12.3, under voltage events: 0, over voltage events: 0, power good: yes
                            12V rail voltage: min 11.4, current 11.4, max 11.5, under voltage events: 0
                            Driver 0: standstill, reads 6703, writes 0 timeouts 0, SG min/max not available
                            Driver 1: standstill, reads 6704, writes 0 timeouts 0, SG min/max not available
                            Driver 2: standstill, reads 6702, writes 0 timeouts 0, SG min/max not available
                            Driver 3: standstill, reads 6702, writes 0 timeouts 0, SG min/max not available
                            Driver 4: standstill, reads 6702, writes 0 timeouts 0, SG min/max not available
                            Driver 5: standstill, reads 6701, writes 0 timeouts 0, SG min/max not available
                            Date/time: 2020-12-02 19:08:18
                            Slowest loop: 6.33ms; fastest: 0.22ms
                            === Storage ===
                            Free file entries: 10
                            SD card 0 detected, interface speed: 25.0MBytes/sec
                            SD card longest read time 2.2ms, write time 0.0ms, max retries 0
                            === Move ===
                            Hiccups: 0(0), FreeDm: 375, MinFreeDm: 375, MaxWait: 0ms
                            Bed compensation in use: none, comp offset 0.000
                            === MainDDARing ===
                            Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0 CDDA state: -1
                            === AuxDDARing ===
                            Scheduled moves: 0, completed moves: 0, StepErrors: 0, LaErrors: 0, Underruns: 0, 0 CDDA state: -1
                            === Heat ===
                            Bed heaters = 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
                            === GCodes ===
                            Segments left: 0
                            Movement lock held by null
                            HTTP is idle in state(s) 0
                            Telnet is idle in state(s) 0
                            File is idle in state(s) 0
                            USB is idle in state(s) 0
                            Aux is idle in state(s) 0
                            Trigger is idle in state(s) 0
                            Queue is idle in state(s) 0
                            LCD is idle in state(s) 0
                            SBC is idle in state(s) 0
                            Daemon is idle in state(s) 0
                            Aux2 is idle in state(s) 0
                            Autopause is idle in state(s) 0
                            Code queue is empty.
                            === Network ===
                            Slowest loop: 5.59ms; fastest: 0.03ms
                            Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions Telnet(0), 0 sessions
                            HTTP sessions: 1 of 8

                            • Ethernet -
                              State: active
                              Error counts: 0 0 0 0 0
                              Socket states: 5 2 2 2 2 0 0 0
                              === CAN ===
                              Messages sent 59, longest wait 0ms for type 0
                              === Linux interface ===
                              State: 0, failed transfers: 0
                              Last transfer: 54276ms ago
                              RX/TX seq numbers: 0/1
                              SPI underruns 0, overruns 0
                              Number of disconnects: 0
                              Buffer RX/TX: 0/0-0
                            1 Reply Last reply Reply Quote 0
                            • Vetiundefined
                              Veti
                              last edited by

                              hmm can communication seems to be working.

                              can you update to the latest beta as the diagnostic has been improved.

                              Pseud3mysundefined 1 Reply Last reply Reply Quote 0
                              • Pseud3mysundefined
                                Pseud3mys @Veti
                                last edited by

                                @Veti can we update duet with M997 ?

                                1 Reply Last reply Reply Quote 0
                                • Pseud3mysundefined
                                  Pseud3mys
                                  last edited by

                                  I have:
                                  Error: M997: In-application programming binary "Duet3_SDiap_MB6HC.bin" not found
                                  but there is not this file in the repository ? (git hub )

                                  1 Reply Last reply Reply Quote 0
                                  • Vetiundefined
                                    Veti
                                    last edited by

                                    find that file here
                                    https://github.com/Duet3D/RepRapFirmware/releases/tag/3.0

                                    Pseud3mysundefined 1 Reply Last reply Reply Quote 0
                                    • Pseud3mysundefined
                                      Pseud3mys @Veti
                                      last edited by Pseud3mys

                                      This post is deleted!
                                      1 Reply Last reply Reply Quote 0
                                      • Pseud3mysundefined
                                        Pseud3mys
                                        last edited by

                                        M122 B121 command (for the tool board):
                                        02/12/2020 à 19:29:11 M122 B121
                                        Diagnostics for board 121:
                                        Duet TOOL1LC firmware version 3.2-beta4 (2020-11-26)
                                        Bootloader ID: not available
                                        Never used RAM 4700, free system stack 96 words
                                        HEAT 42 CanAsync 88 CanRecv 82 TMC 48 MAIN 341 AIN 64
                                        Last reset 00:03:22 ago, cause: software
                                        Last software reset data not available

                                        Driver 0: position 0, 80.0 steps/mm, standstill, SG min/max 0/0, read errors 0, write errors 1, ifcnt 19, reads 35710, writes 9, timeouts 0, DMA errors 0
                                        Moves scheduled 0, completed 0, in progress 0, hiccups 0
                                        No step interrupt scheduled
                                        VIN: 12.2V
                                        MCU temperature: min 22.6C, current 25.2C, max 25.2C
                                        Ticks since heat task active 46, ADC conversions started 202540, completed 202539, timed out 0
                                        Last sensors broadcast 0x00000000 found 0 50 ticks ago, loop time 0
                                        CAN messages queued 16, send timeouts 0, received 1906, lost 0, free buffers 36

                                        1 Reply Last reply Reply Quote 0
                                        • Pseud3mysundefined
                                          Pseud3mys
                                          last edited by

                                          and for the mainboard:
                                          02/12/2020 à 19:34:16 M122
                                          === Diagnostics ===
                                          RepRapFirmware for Duet 3 MB6HC version 3.2-beta4 running on Duet 3 MB6HC v1.01 or later (standalone mode)
                                          Board ID: 08DJM-956BA-NA3TJ-6J1D2-3SD6M-9B9LT
                                          Used output buffers: 1 of 40 (12 max)
                                          === RTOS ===
                                          Static ram: 123212
                                          Dynamic ram: 168576 of which 752 recycled
                                          Never used RAM 99652, free system stack 200 words
                                          Tasks: NETWORK(ready,171) ETHERNET(blocked,110) HEAT(blocked,317) CanReceiv(blocked,852) CanSender(blocked,371) CanClock(blocked,356) TMC(blocked,54) MAIN(running,1127) IDLE(ready,19)
                                          Owned mutexes:
                                          === Platform ===
                                          Last reset 00:00:46 ago, cause: software
                                          Last software reset details not available
                                          Error status: 0x00
                                          MCU temperature: min 37.9, current 39.0, max 39.3
                                          Supply voltage: min 12.2, current 12.2, max 12.3, under voltage events: 0, over voltage events: 0, power good: yes
                                          12V rail voltage: min 11.4, current 11.4, max 11.5, under voltage events: 0
                                          Driver 0: position 0, standstill, reads 35416, writes 14 timeouts 0, SG min/max 0/0
                                          Driver 1: position 0, standstill, reads 35417, writes 14 timeouts 0, SG min/max 0/0
                                          Driver 2: position 0, standstill, reads 35418, writes 14 timeouts 0, SG min/max 0/0
                                          Driver 3: position 0, standstill, reads 35422, writes 11 timeouts 0, SG min/max 0/0
                                          Driver 4: position 0, standstill, reads 35423, writes 11 timeouts 0, SG min/max 0/0
                                          Driver 5: position 0, standstill, reads 35424, writes 11 timeouts 0, SG min/max 0/0
                                          Date/time: 2020-12-02 19:34:15
                                          Slowest loop: 5.81ms; fastest: 0.15ms
                                          === Storage ===
                                          Free file entries: 10
                                          SD card 0 detected, interface speed: 25.0MBytes/sec
                                          SD card longest read time 2.4ms, write time 0.0ms, max retries 0
                                          === Move ===
                                          Hiccups: 0(0), FreeDm: 375, MinFreeDm: 375, MaxWait: 0ms
                                          Bed compensation in use: none, comp offset 0.000
                                          === MainDDARing ===
                                          Scheduled moves 0, completed moves 0, StepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
                                          === AuxDDARing ===
                                          Scheduled moves 0, completed moves 0, StepErrors 0, LaErrors 0, Underruns [0, 0, 0], CDDA state -1
                                          === Heat ===
                                          Bed heaters = 0 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 -1, chamberHeaters = -1 -1 -1 -1
                                          === GCodes ===
                                          Segments left: 0
                                          Movement lock held by null
                                          HTTP is idle in state(s) 0
                                          Telnet is idle in state(s) 0
                                          File is idle in state(s) 0
                                          USB is idle in state(s) 0
                                          Aux is idle in state(s) 0
                                          Trigger is idle in state(s) 0
                                          Queue is idle in state(s) 0
                                          LCD is idle in state(s) 0
                                          SBC is idle in state(s) 0
                                          Daemon is idle in state(s) 0
                                          Aux2 is idle in state(s) 0
                                          Autopause is idle in state(s) 0
                                          Code queue is empty.
                                          === Network ===
                                          Slowest loop: 15.69ms; fastest: 0.03ms
                                          Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0), 0 sessions Telnet(0), 0 sessions
                                          HTTP sessions: 1 of 8

                                          • Ethernet -
                                            State: active
                                            Error counts: 0 0 0 0 0
                                            Socket states: 5 2 2 2 2 0 0 0
                                            === CAN ===
                                            Messages queued 171, send timeouts 0, received 896, lost 0, longest wait 2ms for reply type 6031, free buffers 47
                                          1 Reply Last reply Reply Quote 0
                                          • Vetiundefined
                                            Veti
                                            last edited by

                                            duet 3 is also updated?

                                            any info on the heating now?

                                            Pseud3mysundefined 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Unless otherwise noted, all forum content is licensed under CC-BY-SA