Duet2 WiFi Firmware on Raise 3d E2 ?

[Veti]

@jay_s_uk said in Duet2 WiFi Firmware on Raise 3d E2 ?:

iap4e.bin

did you rename it to Duet2combinesIAP.bin like the error message says?

[Proschi3D]

[Veti]

where did you put the file on the sd card?

[Proschi3D]

[Veti]

you are missing a 2 in the filename

[Proschi3D]

@Veti yes

[Proschi3D]

[Proschi3D]

ok after restart it works

[Proschi3D]

Version 3.0 still on it

[Veti]

which firmware file did you use?

[Proschi3D]

the files you send me

[Veti]

i did not send you any files

[Proschi3D]

@Veti sorry I confused you with Jay

[Veti]

which one did you use? the one from the dropbox or the one from the 3.0 one?

[jay_s_uk]

the one from dropbox could be 3.0 to be fair. i just built it from their github

[Proschi3D]

the one from dropbox

[Veti]

the src says 2.02
https://github.com/Raise3D/Reprap-Raise3D-E2-Series/blob/master/RepRapFirmware/src/Version.h

[Proschi3D]

then does not flash the return value

[Veti]

@Proschi78
btw when you says your printer does not work, what do you mean?

there are configuration changes required for going from 2.0 to 3.0

[Proschi3D]

@Veti the printer no longer starts with firmware 3.0